A 100 kW, 500 V, 2000 r.p.m separately excited d.c. motor is energized from a 400 V, 50 Hz, three phase source through a three phase full converter. The voltage drop in conducting thyristors is 2 V. The d.c. motor armature resistance is 0.1 Ω, motor constant is 1.6 V-s/rad, rated armature current is 210 A and no-load armature current is 10% of rated current. Determine the following:
i) Motor terminal voltage at a firing angle of 30
ii) No load motor speed at a firing angle of 30
iii) The firing angle for a speed of 2000 r.p.m at rated armature current
Please rate positively. It helps me alot. Feel free to make a comment.
A 100 kW, 500 V, 2000 r.p.m separately excited d.c. motor is energized from a 400...
6. The speed of a 150 HP, 650 V, 1750 rpm, separately excited DC motor is controlled by a 3- phase full converter. The converter is operating from 3-phase, 460 V, 50 Hz supply. The rated armature current of the motor is 170 A. The motor parameters are Ra = 0.099 2, La = 0.73 mH, and K.D=0.33 V/rpm. Neglect the losses in converter system. Determine i. No-load speed at firing angles a = 0º and a = 30°. Assume...
A separately excited dc motor is fed by a 3-phase, 6-pulse converter shown in figure Q5. The 3-phase line is a 500 V, 60 Hz supply. At rated condition, the dc motor armature current is 15 A. The dc motor armature resistance is 0.15 Ω and the rated speed is 1700 rpm. If the delay angle of the converter is 36 °, calculate the following: 3-phase (2 0 line Figure Q5. (2 marks) Rated voltage of the motor a. b....
i. The speed of a separately excited dc motor is controlled by a one-phase full-wave converter. The field circuit is also controlled by a full-wave converter, see V supply) Vs pk-150V Ra-0.310 L Rf 152O E-63V α. 1-35A Figure 3 The AC supply voltage to the armature and field converters is one-phase, 150Vpeak, 50Hz. The armature resistance Ra-0.31Ω, the field circuit resistance Rf-152Ω, and the motor voltage constant is Kv-1.3V/A. The armature current corresponding to the load demand la-35A The...
2.3 (20 points) A separately-excited de motor is mechanically coupled to a three-phase, 4-pole, 30-kVA, 460-V, round-rotor synchronous generator. The de motor is connected to a constant 230-V de supply The ac generator is connected to a 460 V, fixed-voltage, fixed-frequency, three-phase supply. The synchronous reactance of the synchronous generator is 513 Ω/phase. The armature resistance of the de motor is 30 m2. The 4-pole de machine is rated 30 kW at 230 V. All unspecified losses are to be...
solve it now please A 220 V, 1000 rpm, separately excited dc motor is fed from a three-phase controlled three-phase ac-dc converter through 220 V (line value-rms value), 50 Hz ac-source. It is required to apply 220 V (dc-value) across the motor terminals. What is the firing angle if the motor speed is 1000 rpm and takes 10 A ripple-free current. The armature resistance is 1 ohm. The field circuit with 198 ohms is fed from a fully controlled single-phase...
3. A 3-phase full-wave converter drive is feeding power to a 220 V, 20 A, 1500 rpm separately excited DC motor. The ac input to the converters are 415 V, 3-phase, 50 Hz, Y-connected supply system, connected through a step-down transformer so that the armature terminal voltage equals to rated voltage when converter firing angle is 0°. The resistance of the armature winding is 0.5 12. Determine the firing angle, i. when the motor is running at 1000 rpm and...
A 230 V, 1000 rpm, 30 A separately excited motor has armature resistance and inductance of 0.7 Ω and 50 mH respectively. Motor is controlled in regenerative braking by a chopper operating at 800 Hz from a dc source of 230 V. Assuming continuous conduction a) Calculate duty ratio of chopper for rated torque and the speed of 800 rpm. b) What will be the motor speed for duty ratio of 0.6 and rated motor torque? c) What will be...
The speed of a separately excited de motor is controlled by a one-phase full-wave converter. The field circuit is also controlled by a full-wave converter and the field current is set to its maximum value. The AC supply voltage to the armature and field converters is one-phase, 400V, 50Hz. The armature resistance Ra 0.232, the field circuit resistance Rf- 1812, and the motor voltage constant is Kv 1.3V/A - rad/s. The armature current corresponding to the load demand Ia 42A...
4. A 3-phase full-wave converter drive is feeding power to a 220 V, 20 A, 1000 rpm separately excited dc motor. The ac input to the converters are 415 V, 3-phase, 50 Hz, Y-connected supply system. The field is also controlled by a 3-phase full converter and is set to the maximum possible value. The armature resistance is 0.5 Q and the field resistance is 250 12. The motor voltage constant is 1.2 V/A rad/s. Assume continuous conduction and ripple...
Show all working 1. A 4 pole, 220 V, 10 H.P, d.c. shunt motor is rotating at a speed of 320 rpm. Then the developed useful torque is 2. A 4 pole, lap wound d.c. motor drawing an armature current of 20 A has 360 conductors. If the flux per pole is 0.015 Wb then the gross torque developed by the armature of motor is 3. A 220 V, d.c. motor draws an armature current of 20 A. Its armature...