Homework Answers
In the wheelbarrow above, the load has a perpendicular lever arm of 9 cm, while the...
In the wheelbarrow above, the load has a perpendicular lever arm of 9 cm, while the hands have a perpendicular lever arm of 0.97 m. (a) What upward force must you exert to support the wheelbarrow and its load if their combined mass is 58.5 kg? (b) What force does the wheelbarrow exert on the ground?
Figure 1 shows a SCARA (Selective Compliance Assembly Robot Arm)- type robot. 1. According to preliminary...
Figure 1 shows a SCARA (Selective Compliance Assembly Robot Arm)- type robot. 1. According to preliminary rules, how many frames should we at least assign? Draw the z axis for each frame and then x axis and y axis accordingly based on the following Denavit-Hartenberg (DH) frame rules. (1) The z axis must be the axis of revolution or the direction of motion (2) The x axis must be perpendicular to the z axis of the frame before it (3)...
Watashi no namae Homework 1 A wooden pallet (20 kg) carrying a load of 600 kg...
Watashi no namae Homework 1 A wooden pallet (20 kg) carrying a load of 600 kg rests on a wooden floor (s 0.2, Pk 0 pallet itself is rated for a maximum load of 2086 kg. 1. How much force must the pallet apply to the load to keep from collapsing? 2. How much force must the floor be able to muster to not collapse? 3. A forklift river decides to push the loaded pallet without lifting it. What force...
Problem 13.92 The arm is rotating at a rate of θ = 4 rad/s when θ-3...
Problem 13.92 The arm is rotating at a rate of θ = 4 rad/s when θ-3 rad/s2 and θ = 180° . It is confined to move along the slotted path. Motion occurs in the horizontal plane. (Figure 1) Part A Determine the force it must exert on the 0.3-kg smooth cylinder. Express your answer to three significant figures and include |F-1 Value Units Figure 1 of 1 Submit Request Answer Provide Feedback -4 rad/s, 6 -3 rad/s*
1 A force of 250.0 N is exerted on a 1,250 N car while moving it...
1 A force of 250.0 N is exerted on a 1,250 N car while moving it a distance of 5.00 m. How much work (in J) was done on the car? Enter answer 2. An electric hoist does 133,000 J of work in raising a 350.0 kg load. How high (in m) was the load lifted? Enter answer 3 What is the kinetic energy (in J) of a 45-gram bullet that is traveling at 185 m/s? Enter answer 4 How...
450-300 Slow Left V=42.6 cm/s. 9.59 cm's Fit=92/100 90 cm 80 cm 70 cm 60 cm...
450-300 Slow Left V=42.6 cm/s. 9.59 cm's Fit=92/100 90 cm 80 cm 70 cm 60 cm y-axis 50 cm 40 cm 30 cm 20 cm 10 cm 2500 ms 3500 ms 0 cm O ms 500 ms 1500 ms X-axis Setup SmMdSlowL All LgMdSlowL MdMdSlowL ME=Kolt... ☆ llision? G Select Language ООО 1. What type of collision conserves kinetic energy? elastic collision inelastic collision stretching collision 2. What distinguishes speed and velocity? Speed and velocity are the same thing. Speed...
The arm is rotating at a rate of @ - 4 rad/s when 2 = 3...
The arm is rotating at a rate of @ - 4 rad/s when 2 = 3 rad/sand = 180°. It is confined to move along the slotted at Motion accurs in the horizontal plane Figure 1) Part A Determine the force it must exert on the 0.5 kg smooth cylinder. Express your answer to three significant figures and include the appropriate unite Suomen edo ele keyboard shortcuts help cate F 0.01617 Submit Previous Antwort Raquest Answer X Incorrect; Try Again:...
Consider the motional emf arrangement shown in the figure. The 27.5 cm long rod moves at...
Consider the motional emf arrangement shown in the figure. The 27.5 cm long rod moves at a constant 6.50 m/s. What is the strength of the magnetic field, in Teslas, if a 48.0 V emf is induced? BLANK-1 What is the magnitude of the current, in Amperes, that flows through the 75.0-ohm load resistor? BLANK-2 What force, in Newtons, must be applied to the rod to maintain its constant speed? BLANK-3 How far, in meters, will the 0.50-kg rod continue...
We wish to determine the moment at the shoulder that is required to perform the arm...
We wish to determine the moment at the shoulder that is required to perform the arm motion (shoulder abduction) depicted in Figure 3 below. This motion may be modelled with a simple, single- element linkage system as shown in the figure. The shoulder joint is represented by a simple pin support centred at O. The arm and the carried weight are represented as a rigid body consisting of a rod and a cuboid. In the rigid body model, the length...
Please help me understand 4,5 & 6. Open with 125.25 m when a force of 800...
Please help me understand 4,5 & 6.
Open with 125.25 m when a force of 800 N is applied. What is the stretch (Young's) modulus for the material? 2. A piece of beef tendon 25.00 cm long and of crows section 7.8 mm x 13m is stretched to a length of 25.19 cm when it spported a vertical load of 096 kg Calculate Young's modulus for the tendon. 3. A jug contains 4000.0 c of kerosene at atmospheric prese(1kPa) When...
Figure 1 shows a SCARA (Selective Compliance Assembly Robot Arm)- type robot. 1. According to preliminary rules, how many frames should we at least assign? Draw the z axis for each frame and then x axis and y axis accordingly based on the following Denavit-Hartenberg (DH) frame rules. (1) The z axis must be the axis of revolution or the direction of motion (2) The x axis must be perpendicular to the z axis of the frame before it (3)...
Watashi no namae Homework 1 A wooden pallet (20 kg) carrying a load of 600 kg rests on a wooden floor (s 0.2, Pk 0 pallet itself is rated for a maximum load of 2086 kg. 1. How much force must the pallet apply to the load to keep from collapsing? 2. How much force must the floor be able to muster to not collapse? 3. A forklift river decides to push the loaded pallet without lifting it. What force...
Problem 13.92 The arm is rotating at a rate of θ = 4 rad/s when θ-3 rad/s2 and θ = 180° . It is confined to move along the slotted path. Motion occurs in the horizontal plane. (Figure 1) Part A Determine the force it must exert on the 0.3-kg smooth cylinder. Express your answer to three significant figures and include |F-1 Value Units Figure 1 of 1 Submit Request Answer Provide Feedback -4 rad/s, 6 -3 rad/s*
1 A force of 250.0 N is exerted on a 1,250 N car while moving it a distance of 5.00 m. How much work (in J) was done on the car? Enter answer 2. An electric hoist does 133,000 J of work in raising a 350.0 kg load. How high (in m) was the load lifted? Enter answer 3 What is the kinetic energy (in J) of a 45-gram bullet that is traveling at 185 m/s? Enter answer 4 How...
450-300 Slow Left V=42.6 cm/s. 9.59 cm's Fit=92/100 90 cm 80 cm 70 cm 60 cm y-axis 50 cm 40 cm 30 cm 20 cm 10 cm 2500 ms 3500 ms 0 cm O ms 500 ms 1500 ms X-axis Setup SmMdSlowL All LgMdSlowL MdMdSlowL ME=Kolt... ☆ llision? G Select Language ООО 1. What type of collision conserves kinetic energy? elastic collision inelastic collision stretching collision 2. What distinguishes speed and velocity? Speed and velocity are the same thing. Speed...
The arm is rotating at a rate of @ - 4 rad/s when 2 = 3 rad/sand = 180°. It is confined to move along the slotted at Motion accurs in the horizontal plane Figure 1) Part A Determine the force it must exert on the 0.5 kg smooth cylinder. Express your answer to three significant figures and include the appropriate unite Suomen edo ele keyboard shortcuts help cate F 0.01617 Submit Previous Antwort Raquest Answer X Incorrect; Try Again:...
We wish to determine the moment at the shoulder that is required to perform the arm motion (shoulder abduction) depicted in Figure 3 below. This motion may be modelled with a simple, single- element linkage system as shown in the figure. The shoulder joint is represented by a simple pin support centred at O. The arm and the carried weight are represented as a rigid body consisting of a rod and a cuboid. In the rigid body model, the length...
Please help me understand 4,5 & 6.
Open with 125.25 m when a force of 800 N is applied. What is the stretch (Young's) modulus for the material? 2. A piece of beef tendon 25.00 cm long and of crows section 7.8 mm x 13m is stretched to a length of 25.19 cm when it spported a vertical load of 096 kg Calculate Young's modulus for the tendon. 3. A jug contains 4000.0 c of kerosene at atmospheric prese(1kPa) When...
Most questions answered within 3 hours.
-
Please explain steps:
An 80 kg swimmer steps off a platform 10 m above the water...
asked 6 minutes ago -
A lottery exists where balls numbered 1 to 17 are placed in an
urn. To win,...
asked 9 minutes ago -
26) Briefly describe, using words or simple diagrams, the
chemiosmotic theory for coupling oxidation to phosphorylation...
asked 2 hours ago -
Suppose that XX is a random variable with mean 16 and standard
deviation 5 . Also...
asked 2 hours ago -
Calculate the number density of argon gas at a temperature of
24C and a pressure of...
asked 6 hours ago -
Alternative
Classification
How to Estimate
Probabilities from Data? ( For continuous Attributes)
And How to generate...
asked 6 hours ago -
An explosion breaks a 20.0-kg object into three parts. The
object is initially moving at a...
asked 6 hours ago -
Calculate the approximate number of residues of Rubisco, which
is involved in carbon fixation in plants,...
asked 7 hours ago -
Other decisions about scientific claims can have a much broader
impact.ENERGYarrow-10x10.png, environment, health, security - all...
asked 8 hours ago -
I need to write a research paper and work cited about this
topic: The United States...
asked 9 hours ago -
Hello! I was wondering if I could have some help?
If the vapor pressure of carvone...
asked 9 hours ago -
An economist wants to estimate the mean per capita income (in
thousands of dollars) for a...
asked 9 hours ago