Homework Answers
Add Answer to:
The oil of density p in a storage tank with cross-sectional area A, is at a...
I put this in and I am not getting the right answer! A tank of cross-sectional...
I put this in and I am not getting the right answer!
A tank of cross-sectional area A2 is filled halfway with water. The tank has a small hole of cross-sectional area Ai in its side near the base. The pressure at the top of the fluid is kept at which is larger than atmospheric pressure. What is the relationship between the flow speed out of the tank (v) and the rate of change of the fluid level in the...
Water flows into a storage tank of cross-sectional area 4 squared ft, and flows out by...
Water flows into a storage tank of cross-sectional area 4 squared ft, and flows out by gravity. The outflow of water is given to be F=2h (h in feet and F in cubic ft per min) is the height of the tank. The inflow is steady at 2 cubic feet. What is the time constant and process gain?
.Emergency Coolant Injection from an Accumulator Tank (8 marks) Consider an accumulator tank with a cross sectional area of A,-10m, and a height of H-6m, initially filled with 5m of water as show...
.Emergency Coolant Injection from an Accumulator Tank (8 marks) Consider an accumulator tank with a cross sectional area of A,-10m, and a height of H-6m, initially filled with 5m of water as shown in the figure. The top of the tank is closed and filled with air at an initial pressure of P, 1,101 kPa At time -Os, the water starts to discharge from an opening at the bottom of the tank with an opening area of A2 0.001m2. The...
Question 5: [Total 12.5 Marks] a) A cylindrical tank of depth 20 feet and cross-sectional area...
Question 5: [Total 12.5 Marks] a) A cylindrical tank of depth 20 feet and cross-sectional area A of radius 5 feet full of water (density of water 62 lb/ft?). i. Calculate the work done using the following definite integral rule: (2.5) W *wAh. dh ii. What is the work done if the cylinder is only half full? (1.5) iii. Interpret your result of part (i) and part (ii). What did you conclude from these two results? (0.5) b) Using the...
A water intake at a pump storage reservoir (the figure) has a cross-sectional area of 0.642...
A water intake at a pump storage reservoir (the figure) has a cross-sectional area of 0.642 m. The water flows in at a speed of 0.480 m/s. At the generator building, at distance D = 119 m below the intake point, the cross-sectional area is smaller than at the intake and the water flows out at 9.67 m/s. What is the difference in pressure between inlet and outlet? Revivir Generator building Outlet Number units
A tank is filled with incompressible oil to a depth of (h_1) 6.43 m. The tank...
A tank is filled with incompressible oil to a depth of (h_1) 6.43 m. The tank is being drained via a horizontal pipe (radius 1.92 cm), attached at a height of (h-2) 0.789 m above the tank bottom. Oil is flowing out through the pipe at a rate of 2.34 times 10^-3 m^3/s, but the tank is so large that the descent speed of the oil level at the top is negligible (almostequalto 0). The gauge pressure in the drain...
A glass tube of cross sectional area 1.3 × 10 4m2 is partially filled with water....
A glass tube of cross sectional area 1.3 × 10 4m2 is partially filled with water. An oil with a density of 810 kg ms is slowly with the water and floats on top of it. The height of the oil above the water's surface is l 1 cn. oned into the tube so that does not mi (a) By how much does the pressure change at a depth of 14 cm below the water's surface after the oil s...
The CH20 (specific gravity 0.82) is collected in a sealed storage tank at -20°C as shown...
The CH20 (specific gravity 0.82) is collected in a sealed storage tank at -20°C as shown on the right. A Bourdon gauge is mounted at the bottom of the tank. The headspace of the tank is filled with N2 gas at a constant pressure of 20 psia, and the atmospheric pressure CH,00) outside the tank is 1 atm. If the cross- sectional area of the tank is 25.0 ft2 and the Bourdon gauge gives a gauge pressure (PBG, in psig),...
A tank, which is open to the atmosphere, is filled with water to a level h...
A tank, which is open to the atmosphere, is filled with water to a level h and allowed to drain through an orifice at the bottom, as shown in the figure below. The cross-sectional area of the tank is At and the cross-sectional area of the orifice is Ao. Assume that the cross-sectional area of the tank is much greater than the cross-sectional area of the orifice (Ar>>Ao) and that the exit losses are negligible. 4) Use Reynolds Transport Theorem...
The figure Tank3png shows a water tank where a wall is a vertical flat-plate that is composed of ...
The figure Tank3png shows a water tank where a wall is a vertical flat-plate that is composed of two rectangular faces of areas Ai and A2 with widths w 1.0 m, W2 2.0 m respectively, and one semicircular face of area A3, with radius R 0.5 m. The dimensions h 1.0 m, h2- 1.0 m, as shown in the figure. The density of water, p -103kg/m3, acceleration due to gravity, g = 10 m/s The figure 4 shows a water...
I put this in and I am not getting the right answer!
A tank of cross-sectional area A2 is filled halfway with water. The tank has a small hole of cross-sectional area Ai in its side near the base. The pressure at the top of the fluid is kept at which is larger than atmospheric pressure. What is the relationship between the flow speed out of the tank (v) and the rate of change of the fluid level in the...
.Emergency Coolant Injection from an Accumulator Tank (8 marks) Consider an accumulator tank with a cross sectional area of A,-10m, and a height of H-6m, initially filled with 5m of water as shown in the figure. The top of the tank is closed and filled with air at an initial pressure of P, 1,101 kPa At time -Os, the water starts to discharge from an opening at the bottom of the tank with an opening area of A2 0.001m2. The...
Question 5: [Total 12.5 Marks] a) A cylindrical tank of depth 20 feet and cross-sectional area A of radius 5 feet full of water (density of water 62 lb/ft?). i. Calculate the work done using the following definite integral rule: (2.5) W *wAh. dh ii. What is the work done if the cylinder is only half full? (1.5) iii. Interpret your result of part (i) and part (ii). What did you conclude from these two results? (0.5) b) Using the...
A water intake at a pump storage reservoir (the figure) has a cross-sectional area of 0.642 m. The water flows in at a speed of 0.480 m/s. At the generator building, at distance D = 119 m below the intake point, the cross-sectional area is smaller than at the intake and the water flows out at 9.67 m/s. What is the difference in pressure between inlet and outlet? Revivir Generator building Outlet Number units
A tank is filled with incompressible oil to a depth of (h_1) 6.43 m. The tank is being drained via a horizontal pipe (radius 1.92 cm), attached at a height of (h-2) 0.789 m above the tank bottom. Oil is flowing out through the pipe at a rate of 2.34 times 10^-3 m^3/s, but the tank is so large that the descent speed of the oil level at the top is negligible (almostequalto 0). The gauge pressure in the drain...
A glass tube of cross sectional area 1.3 × 10 4m2 is partially filled with water. An oil with a density of 810 kg ms is slowly with the water and floats on top of it. The height of the oil above the water's surface is l 1 cn. oned into the tube so that does not mi (a) By how much does the pressure change at a depth of 14 cm below the water's surface after the oil s...
The CH20 (specific gravity 0.82) is collected in a sealed storage tank at -20°C as shown on the right. A Bourdon gauge is mounted at the bottom of the tank. The headspace of the tank is filled with N2 gas at a constant pressure of 20 psia, and the atmospheric pressure CH,00) outside the tank is 1 atm. If the cross- sectional area of the tank is 25.0 ft2 and the Bourdon gauge gives a gauge pressure (PBG, in psig),...
A tank, which is open to the atmosphere, is filled with water to a level h and allowed to drain through an orifice at the bottom, as shown in the figure below. The cross-sectional area of the tank is At and the cross-sectional area of the orifice is Ao. Assume that the cross-sectional area of the tank is much greater than the cross-sectional area of the orifice (Ar>>Ao) and that the exit losses are negligible. 4) Use Reynolds Transport Theorem...
The figure Tank3png shows a water tank where a wall is a vertical flat-plate that is composed of two rectangular faces of areas Ai and A2 with widths w 1.0 m, W2 2.0 m respectively, and one semicircular face of area A3, with radius R 0.5 m. The dimensions h 1.0 m, h2- 1.0 m, as shown in the figure. The density of water, p -103kg/m3, acceleration due to gravity, g = 10 m/s The figure 4 shows a water...
Most questions answered within 3 hours.
-
true or false. If work is done on a system by it's
surroundings, its value is...
asked 36 seconds ago -
Rene Descartes establishes a dualist approach to the world.
Explain this dualism, and how it connects...
asked 6 minutes ago -
According to a recent national Gallup Poll of U.S. smartphone
user, 35% upgrade their cell phone...
asked 10 minutes ago -
Suppose researchers perform a large-sample test of a population
proportion where the null hypothesis is that...
asked 9 minutes ago -
Jessica is single and has taxable income of $305,000 of which
$130,000 is attributable to her...
asked 13 minutes ago -
Can someone help me fill in the first part of this c++ code:
I need it...
asked 15 minutes ago -
A reaction vessel at 27 ∘C contains a mixture of SO2(P=3.10 atm
) and O2(P=1.00 atm...
asked 35 minutes ago -
A scientist randomly mutates the DNA of a bacterium. She then
sequences the bacterium’s daughter cells,...
asked 46 minutes ago -
2. Content theories attempt to explain work behaviors based on
__________.
a. the relationship between values...
asked 39 minutes ago -
Discuss the impact of technology on Medieval society and culture
and the impact of society and...
asked 36 minutes ago -
Assignment 3: Introduction & Environmental Analysis,
SWOT, Marketing Objectives (Goals) Marketing 4100
Directions
Total Point Value:...
asked 28 minutes ago -
Forecasts and actual sales of MP3 players at Just Say
Music are as follows:
Month
Forecast...
asked 29 minutes ago