Question2 An aluminum plate of length 1 m and width 1 m at 80 °C is...
estion 9 10 points Saver Engine oil at 80'C flows over a 5-m-long flat plate whose temperature is 30°C with a velocity of 5.5 m/s. The properties of engine oil at the film temperature of (Ts + T-y2 = (80+ 30y2 = 55°C are p =367 kg/m2, v = 7.045 105 m2/s, k = 0.1414 W/m.*C, and Pr = 1551. Determine the Heat Transfer in kW
Qi. A flat plate of width 1 m and length 0.2m is maintained at a temperature of 32°C. Ambient fluid at 22"C fBlows across the top of the plate in parallel flow. Determine the average heat transfer coefficient, the convection heat transfer rate from the top of the plate, and the drag force on the plate for the following: (a) The Buid is water flowing at a velocity of 0.5 m/s. o) Water is flowing at a velocity of 2.5...
Consider liquid water flowing over a flat plate of length L = 1 m. The water has the following properties: ρ-1000 kg/m3, Cp-4000 J/kgK. 10 3 kg/ ms, k 0.6 W/m . C μ Midway through the plate at x = 0.5 m, you measure a heat flux to the surface of: 05 m 3181 W/m2 You also measure an average heat flux to the surface over the length of the plate of: "4500 W/m2 Knowing the latter, and knowing...
1. A very smooth flat plate of length L = 0.5 m and width b = 2 m is immersed parallel to a stream of velocity 2 m/s. For both air and water as the working fluids; a. Show that the flow is completely laminar over the entire plate. (5 marks] b. Determine the drag force on one side of the plate. [4 marks] c. Determine the thicknesses , 8*, and at the end of the plate (x = L)....
Hot carbon dioxide exhaust gas at 1 atm is being cooled by flat plates. The gas at 220°C flows in parallel over the upper and lower surfaces of a 1.4-m-long flat plate at a velocity of 1.8 m/s and the flat plate surface temperature is maintained at 80°C. The properties of CO2 at Tf = (220°C + 80°C)/2 = 150°C are k = 0.02652 W/m∙K, ν = 1.627 × 10−5 m2/s, and Pr = 0.7445. Determine the local convection heat...
An aluminum alloy (2024) plate, heated to a uniform temperature of 227°C, is allowed to cool while vertically suspended in a room where the ambient air and surroundings are at 27°C. The plate is 0.3 m square with a thickness of 15 mm. a) calculate the rate of heat transfer from the plate to the surrounding air. b) Develop an expression for the time rate of change of the plate temperature, assuming the temperature to be uni form at any...
2. (25 pts) Engine oil flows with a velocity of 6 m/s over a flat plate having 1m length and 1 m width. The oil has a free stream temperature To= 80 °C and the plate surface temperature is maintained at Ts = 0 °C. a. Determine whether the flow over the plate transitions to turbulent regime. b. Calculate the average friction factor and the average heat transfer coefficient for the plate by using the appropriate correlations. c. Calculate the...
1 answer & continue > The upper surface of a 60-cm-thick solid plate (k = 237 W/m-K) is being cooled by water with temperature of 20°C. The upper and lower surfaces of the solid plate maintained at constant temperatures of 60°C and 120°C, respectively. Given: The thermal conductivity of the solid plate is given as k = 237 W/mK. The thermal conductivity of water at the film temperature of T; = (1,1770) =(60°C + 20°C)/2 = 40°C is kfluid =...
Heat transfer stream velocity is 34 m/s. the plate is the end of the plate: the surface of Air lr 120 C is fowing over the top surface of a 5.3-m long: 2.5-m width fnat plate. The air ity is 34 m/s, the plate is subjected to constant heat flux of 153 W/mi. Determine st ae (a)the friction coefficient, (b) the convection heat transfer coefficient, and (c) temperature. Also evaluate the surface temperature at x- 0.5 m of the plate?...
Problem 2 Engine oil at 80 °C flows over 6-m-long n flat plate whose temperature is 30°C s with a velocity of 3 m/s. Determine the total drag force and the rate of heat transfer over the entire plate per unit width