Question

1). A simple Rankine cycle uses water as the working fluid. Saturated vapor enters the turbine at 8.0 MPa and saturated liquid water exists the condenser at a pressure of 8.0 kPa. The net power output of the cycle is 100MW Determine: a. The thermal efficiency b. The work ratio c. The mass flow rate of the steam in kg/min d. The rates of heat transfer into/from the working fluid as it passes through the boiler and condenser, respectively, in MW e. Show the cycle in a T-S and a P-v diagrams. [Anws: a: 37.1%; b: 99.17%; c: 6.28x103 kg/min; d: 269.7 MW & 1697MW] ). The Simple Rankine cycle descripted in question 1 is reanalysed by taking the effects of irreversibility in turbine, of which has an isentropic efficiency of 0.85. Determine: a. The thermal efficiency b. The mass flow rate of the steam in kg/min c. The rates of heat transfer into/from the working fluid as it passes through the boiler and condenser, respectively, in MW d. The changes in specific entropy entering and existing the turbine. e. Show the cycle in a T-S and a P-v diagrams of question 1 Anws: a: 31.5% b: 7.4x1 0-kg/min; c: 31 7.7 MW & 21 7.7MW; d: 0.459 kJ/kg K)
0 0
Add a comment Improve this question Transcribed image text
Answer #1

เงิ 5,よ 5%, 32 C to be e o.sqaC 3 st-794.21 -ignat_ .ch,ーりーCh-ゆ ·P7s3.1794.8).. c181.94-mb SI.qu - I a358-1291, .8 ) ma lo 3守

Add a comment
Know the answer?
Add Answer to:
1). A simple Rankine cycle uses water as the working fluid. Saturated vapor enters the turbine...
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for? Ask your own homework help question. Our experts will answer your question WITHIN MINUTES for Free.
Similar Homework Help Questions
  • Steam is the working fluid in a simple, ideal Rankine cycle. Saturated vapor enters the turbine...

    Steam is the working fluid in a simple, ideal Rankine cycle. Saturated vapor enters the turbine at 8 MPa and saturated liquid exits the condenser at a pressure of 8 kPa. The net power output of the cycle is 100 MW. Determine for the cycle: i. Thermal efficiency ii. Back work ratio iii. Mass flow-rate of the steam in kg/h iv. Rate of heat transfer to the working fluid as it passes through the boiler in MW v. Rate of...

  • 6. Water is the working fluid in an ideal Rankine cycle. Saturated vapor enters the turbine...

    6. Water is the working fluid in an ideal Rankine cycle. Saturated vapor enters the turbine at 16 MPa, and the condenser pressure is 8 kPa. The mass flow rate of steam entering the turbine is 120 kg/s. Determine: (a) Draw the ideal Rankine cycle in T-S diagram (b) The net power developed, in kW. (b) The rate of heat transfer to the steam passing through the boiler, in kW. (c) The thermal efficiency. 2 P (kPa) 16000 16000 TC)...

  • Tutorial Questions 1 1. Water is the working fluid in an ideal Rankine cycle. The condenser...

    Tutorial Questions 1.1. Water is the working fluid in an ideal Rankine cycle. The condenser pressure is kPa, and saturated vapor enters the turbine at 10 MPa. Determine the heat transfer rates, in kJ per kg of steam flowing, for the working fluid passing through the boiler and condenser and calculate the thermal efficiency.2. Water is the working fluid in an ideal Rankine cycle. Saturated vapor enters the turbine at 16 MPa, and the condenser pressure is 8 kPa ....

  • Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 10...

    Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 10 Mpa, 560 C with a mass flow rate of 7.8kg/s and exits at 8 kPa. Saturated liquid enters the pump at 8 kPa. The isentropic turbine efficiency is 85%, and the isentropic pump efficiency is 85%. Cooling water enters the adiabatic condenser at 18 C and exits at 36 C with no significant change in pressure and assuming the specific heat of the cooling...

  • Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 8...

    Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 8 MPa, 700°C and the turbine exit pressure is 8 kPa. Saturated liquid enters the pump at 8 kPa. The heat transfer rate to the working fluid in the steam generator is 24 MW. The isentropic turbine efficiency is 88%, and the isentropic pump efficiency is 82%. Cooling water enters the condenser at 18°C and exits at 36°C with no significant change in pressure. Determine...

  • Water is the working fluid in a Carnot vapor power cycle. Saturated liquid enters the boiler...

    Water is the working fluid in a Carnot vapor power cycle. Saturated liquid enters the boiler at a pressure of 160 bar, and saturated vapor enters the turbine. The condenser pressure is 0.08 bar. Determine (a) the thermal efficiency. (b) the back work ratio. (c) the heat transfer to the working fluid per unit mass passing through boiler, in kJ/kg. (d) the heat transfer from the working fluid per unit mass passing through the condenser, in kJ/kg. Problem 8.03 Water...

  • 4. Water is the working fluid in a Carnot vapor power cycle. Saturated liquid enters the...

    4. Water is the working fluid in a Carnot vapor power cycle. Saturated liquid enters the boiler at 16 MPa, and saturated vapor enters the turbine. The condenser pressure is 8 kPa. The mass flow rate of steam entering the turbine is 120 kg/s. Determine (a) the thermal efficiency. (b) the back work ratio. (c) the net power developed, in kW. (d) the rate of heat transfer from the working fluid passing through the condenser, in kW.

  • Water is the working fluid in an ideal Rankine cycle with reheat. Superheated vapor enters...

    Water is the working fluid in an ideal Rankine cycle with reheat. Superheated vapor enters the turbine at 8 MPa, 480℃, and the condenser pressure is 8 kPa. Steam expands through the first stage turbine to 700 kPa and then is reheated to 480℃. Assumptions: see problem 1 . Determine for the cycle(a) the rate of heat addition, in kJ per kg to the working fluid in the steam generator.(b) the thermal efficiency.(c) the rate of heat transfer from the...

  • Problem 4 In the vapor power cycle shown below, steam (H20) is the working fluid. Saturated...

    Problem 4 In the vapor power cycle shown below, steam (H20) is the working fluid. Saturated vapor enters the turbine at 100 bar and saturated liquid exits the condenser at a pressure of 0.1 bar. The net power output of the cycle, Weycle, is 150 MW. Isentropic efficiency of the turbine and the pump (n (hi-h2)/(h1-h2s), np=(h25-h1)/(h2-h1)) are both 80%. Determine the followings. [30 pts] (a) Thermal efficiency, n (b) Mass flow rate of the steam, m, in kg/s (c)...

  • A simple ideal Rankine cycle with water as the working fluid operates between the pressure limits...

    A simple ideal Rankine cycle with water as the working fluid operates between the pressure limits of 15 MPa in the boiler and 100 kPa in the condenser. Saturated steam enters the turbine. Determine the work produced by the turbine, the heat transferred in the boiler, and thermal efficiency of the cycle. As part of your solution, sketch a simplified diagram of the cycle, labelling each component, indicating where heat and work flows into or out of the system, and...

ADVERTISEMENT
Free Homework Help App
Download From Google Play
Scan Your Homework
to Get Instant Free Answers
Need Online Homework Help?
Ask a Question
Get Answers For Free
Most questions answered within 3 hours.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT