Homework Answers
Add Answer to:
I need help on this Geotechnical Engineering its due
today
W = V V = W,...
Problem 1 (3 points) The results of a standard Proctor test are given in the following...
Problem 1 (3 points) The results of a standard Proctor test are given in the following table. Moisture Mass of moist soil in the mold (R) Trial no. 1668 1723 1800 1850 1873 8.9 12 1868 a. Determine the maximum dry unit weight of compaction and the opti- mum moisture content. Given: Mold volume = 943.3 cm'. b. Determine the void ratio and the degree of saturation at the optimum moisture content. Given: G, = 2.73 Problem 2 (4 points)...
The results of a standard Proctor test (ASTM performed in a standard mold with V-1/30 ft...
The results of a standard Proctor test (ASTM performed in a standard mold with V-1/30 ft are given below Weight of wet soil Water content in the mold (Ibs 3.26 4.15 4.67 4.02 3.63 8.4 10.2 12.3 14.6 16.8 a) Plot the data on a plot of dry unit weight versus water content and determine the maximum dry unit weight and the optimum water content. As the geotechnical engineering consultant involved in the project, based on the results obtained in...
The following results were obtained from standard Proctor compaction tests. Test ID Mass of moist soil...
The following results were obtained from standard Proctor compaction tests. Test ID Mass of moist soil (kg) 1 1.633 Standard Proctor Test 2 . 1.841 1.907 1.822 1.756 Moisture Content Test 14 14 Mass of tin empty (g) Mass of tin + wet sample (g) Mass of tin + dry sample (g) 98 62 878280 (a) Calculate moisture content (w) and dry unit weight (ya) for standard Proctor compaction tests. Plot moisture content (w) vs. dry unit weight (yd). Given:...
Q.1 (a) Soil sample has been collected in a compacted embankment at a dry density (Pty)...
Q.1 (a) Soil sample has been collected in a compacted embankment at a dry density (Pty) of 1950 kg/m, air void ratio (A.) of 15% and mass of solid (M.) of 3 kg. The value of G, is 2.7. Determine the following: O mass of water (MX) and total mass (M), (4 marks) (i) volume of air (V.), water (V.x) and solid (V.); (6 marks) (iii) void ratio (e), porosity (n), moisture content (w), and degree of saturation (S) and;...
the only question to answer are 2-5 2-7 2-10 2-17 2-19 thank you CHAPTER Two 2-3....
the only question to answer are
2-5
2-7
2-10
2-17
2-19
thank you
CHAPTER Two 2-3. An undisturbed chunk of soil has a wet weight of 62 lb and a volume of o.s6 ft. When dried out in an oven, the soil weighs S0 Ib. If the specific gravity o solids is found to be 2.64, determine the water con- tent, wet unit weight of soil, dry unit soil. 2-13. The wet unit weight of a soil sample is 18.55...
undisturbed soil sample has a total mass of 2290 g and volume of 1.15 x 10...
undisturbed soil sample has a total mass of 2290 g and volume of 1.15 x 10 cm'. Specifica ity of the soil mineral G. = 2.68. Recall pw = 1 g/cm'. (a) A natural water content test of the sample gave the following results mass of container: 17.31 g mass of container plus wet soil (before drying in oven) 43.52 g mass of container plus dry soil (after drying in oven) 39.86 g What is the natural water content of...
write nicely thank you bruh this for sand (b) A soil sample from a proposed...
write nicely thank you bruh
this for sand
(b) A soil sample from a proposed road construction in Segamat, Johor was sent to a Geotechnical Laboratory UTHM, for a compaction test. The results of compaction test obtained using modified Proctor compaction test is shown in Figure Q4 (b). 3 hi HELP ME! Predict the maximum dry density (Pmax), optimum moisture content (OMC), the dry density at 95% compaction and the range of moisture content at 95% compaction on dry...
From Geotechnical Engineering class Soil sample A and sample B each weigh 1 kN. Sample A...
From Geotechnical Engineering class
Soil sample A and sample B each weigh 1 kN. Sample A is 100% saturated and sample B is 50% saturated. Is it possible for sample B to have more water than sample A? Explain. 2. 3. For a given soil, the following parameters are known: void ratio 0.68, specific gravity 2.75, moisture content-15%. Determine dry unit weight moist unit weight (total unit weight) water content at S=100% saturated unit weight (total unit weight when S=100%)...
B. The moist weight of 0.028 m3 of a soil is 52 kg. The moisture content...
B. The moist weight of 0.028 m3 of a soil is 52 kg. The moisture content and the specific gravity of the soil solids are determined in the laboratory to be 11% and 2.7 , respectively. Calculate the following: Moist unit weight (kg/m3) i. Dry unit weight (kg/m3) ii. Void ratio d. Porosity iii. iv. Degree of saturation (%) Volume occupied by water (m3) v. ngle C. For the soil sample in A (above) represent the following on a soil...
A field soil sample from a cylindrical borehole shown below was collected from field and oven-...
A field soil sample from a cylindrical borehole shown below was collected from field and oven- dried in the lab. Following are the available data. (Assume G, 2.65) Weight of soil sample (Ib) Weight of over-dried soil sample (Ib) 61.85 55.15 Fill-in the Table below for the soil sample: Volume of the hole (in) Unit Weight (lb/t) Moisture Content, w (%) Dry Unit Weight (lb/ft) Void Ratio, e Saturation, S (%) Porosity, n (%) Air Content, A (%) Saturated Unit...
Problem 1 (3 points) The results of a standard Proctor test are given in the following table. Moisture Mass of moist soil in the mold (R) Trial no. 1668 1723 1800 1850 1873 8.9 12 1868 a. Determine the maximum dry unit weight of compaction and the opti- mum moisture content. Given: Mold volume = 943.3 cm'. b. Determine the void ratio and the degree of saturation at the optimum moisture content. Given: G, = 2.73 Problem 2 (4 points)...
The results of a standard Proctor test (ASTM performed in a standard mold with V-1/30 ft are given below Weight of wet soil Water content in the mold (Ibs 3.26 4.15 4.67 4.02 3.63 8.4 10.2 12.3 14.6 16.8 a) Plot the data on a plot of dry unit weight versus water content and determine the maximum dry unit weight and the optimum water content. As the geotechnical engineering consultant involved in the project, based on the results obtained in...
The following results were obtained from standard Proctor compaction tests. Test ID Mass of moist soil (kg) 1 1.633 Standard Proctor Test 2 . 1.841 1.907 1.822 1.756 Moisture Content Test 14 14 Mass of tin empty (g) Mass of tin + wet sample (g) Mass of tin + dry sample (g) 98 62 878280 (a) Calculate moisture content (w) and dry unit weight (ya) for standard Proctor compaction tests. Plot moisture content (w) vs. dry unit weight (yd). Given:...
Q.1 (a) Soil sample has been collected in a compacted embankment at a dry density (Pty) of 1950 kg/m, air void ratio (A.) of 15% and mass of solid (M.) of 3 kg. The value of G, is 2.7. Determine the following: O mass of water (MX) and total mass (M), (4 marks) (i) volume of air (V.), water (V.x) and solid (V.); (6 marks) (iii) void ratio (e), porosity (n), moisture content (w), and degree of saturation (S) and;...
the only question to answer are
2-5
2-7
2-10
2-17
2-19
thank you
CHAPTER Two 2-3. An undisturbed chunk of soil has a wet weight of 62 lb and a volume of o.s6 ft. When dried out in an oven, the soil weighs S0 Ib. If the specific gravity o solids is found to be 2.64, determine the water con- tent, wet unit weight of soil, dry unit soil. 2-13. The wet unit weight of a soil sample is 18.55...
undisturbed soil sample has a total mass of 2290 g and volume of 1.15 x 10 cm'. Specifica ity of the soil mineral G. = 2.68. Recall pw = 1 g/cm'. (a) A natural water content test of the sample gave the following results mass of container: 17.31 g mass of container plus wet soil (before drying in oven) 43.52 g mass of container plus dry soil (after drying in oven) 39.86 g What is the natural water content of...
write nicely thank you bruh
this for sand
(b) A soil sample from a proposed road construction in Segamat, Johor was sent to a Geotechnical Laboratory UTHM, for a compaction test. The results of compaction test obtained using modified Proctor compaction test is shown in Figure Q4 (b). 3 hi HELP ME! Predict the maximum dry density (Pmax), optimum moisture content (OMC), the dry density at 95% compaction and the range of moisture content at 95% compaction on dry...
From Geotechnical Engineering class
Soil sample A and sample B each weigh 1 kN. Sample A is 100% saturated and sample B is 50% saturated. Is it possible for sample B to have more water than sample A? Explain. 2. 3. For a given soil, the following parameters are known: void ratio 0.68, specific gravity 2.75, moisture content-15%. Determine dry unit weight moist unit weight (total unit weight) water content at S=100% saturated unit weight (total unit weight when S=100%)...
B. The moist weight of 0.028 m3 of a soil is 52 kg. The moisture content and the specific gravity of the soil solids are determined in the laboratory to be 11% and 2.7 , respectively. Calculate the following: Moist unit weight (kg/m3) i. Dry unit weight (kg/m3) ii. Void ratio d. Porosity iii. iv. Degree of saturation (%) Volume occupied by water (m3) v. ngle C. For the soil sample in A (above) represent the following on a soil...
A field soil sample from a cylindrical borehole shown below was collected from field and oven- dried in the lab. Following are the available data. (Assume G, 2.65) Weight of soil sample (Ib) Weight of over-dried soil sample (Ib) 61.85 55.15 Fill-in the Table below for the soil sample: Volume of the hole (in) Unit Weight (lb/t) Moisture Content, w (%) Dry Unit Weight (lb/ft) Void Ratio, e Saturation, S (%) Porosity, n (%) Air Content, A (%) Saturated Unit...
Most questions answered within 3 hours.
-
Assume Kw = 1.01 ✕ 10−14
For pure water, we can calculate [H3O+ ] = [OH...
asked 14 minutes ago -
Suppose that on a temperature scale X, water boils at 203.0°X
and freezes at -105.7°X. What...
asked 1 hour ago -
BaS crystallizes in a cubic unit cell with S2- ions on each
corner and each face....
asked 1 hour ago -
A. 0≤P(Oi)≤10≤P(Oi)≤1 for each i
B. P(Oi)≤0P(Oi)≤0
C. P(Oi)=1+P(OCi)P(Oi)=1+P(OiC)
D. P(Oi)≥1P(Oi)≥1
If an experiment consists of...
asked 3 hours ago -
A battery has an emf of 9.20V and an internal resistance of 1.20
ohm. a)What resistance...
asked 3 hours ago -
The area of an elastic circular loop decreases at a constant
rate, dA/dt = −6.60×10−3 m2/s...
asked 4 hours ago -
The denaturation of proteins can be described by the
equilibrium
F⇌U
where F and U represent...
asked 5 hours ago -
Please answer what the maximum and minimum force is, and the
angle on the ion is...
asked 5 hours ago -
implement a program that reads a number of rows and a symbol.
The program will draw...
asked 5 hours ago -
Assume that when adults with smartphones are randomly selected,
45% use them in meetings or classes....
asked 5 hours ago -
Determine the number of formula units of
Na2SO4 and moles of oxygen contained in 8.11
moles...
asked 6 hours ago -
Explain in steps on the following code
What would be the output when executed
using System;...
asked 6 hours ago