1kVA ideal single phase step-up transformer
Q1 A 1kVA ideal single phase step-up transformer is supplied by a 24 V ac power source and is delivering power to a 10 Ω resistive load connected to the secondary side. If the transformer is operated at full load (1kVA), determine, a) the secondary current IS; (3 marks) b) the secondary voltage VS; (2 marks) c) the primary current IP; (2 marks) d) the turn ratio of primary winding to secondary winding; and (2 marks) e) the number of turns of secondary winding if the primary winding coil contains 100 turns. (2 marks)
Homework Answers
An ideal step-down transformer has a primary coil of 400 turns and a secondary coil of...
An ideal step-down transformer has a primary coil of 400 turns and a secondary coil of 25 turns. Its primary coil is plugged into an outlet with 110 V(AC), from which it draws an rms current of 0.83 A. 1.)What is the voltage in the secondary coil? 2.)Calculate the rms current in the secondary coil. 3.)Assuming that the transformer secondary is driving a resistive load, calculate the average power dissipated in the resistor.
Al. A 1 kVA single-phase step-down transformer is connected to a 220 V, 50 Hz A.C....
Al. A 1 kVA single-phase step-down transformer is connected to a 220 V, 50 Hz A.C. source and delivers power to a load. The winding resistance and reactance at secondary side are 0.02 2 and 0.1 12 respectively. The maximum value of core flux is 0.248 mWb and the secondary winding contains 1000 turns. Evaluate a. b. the voltage induced on the secondary side; the turn ratio of primary side to secondary side; the rated current on both sides; and...
A single-phase 100-kVA, 2400/240-volt, 60-Hz distribution transformer is used as a step-down transformer. The load, which...
A single-phase 100-kVA, 2400/240-volt, 60-Hz distribution transformer is used as a step-down transformer. The load, which is connected to the 240-volt secondary winding, absorbs 80 kVA at 0.8 power factor lagging and is at 230 volts. Assuming an ideal transformer, calculate the following: a) primary voltage. b) load impedance. c) load impedance referred to the primary. d) the real and reactive power supplied to the primary winding
An ideal step-down transformer has a primary coil of 370 turns and a secondary coil of...
An ideal step-down transformer has a primary coil of 370 turns and a secondary coil of 22 turns. Its primary coil is plugged into an outlet with 115 V, from which it draws a current of 0.29 A. (a) What is the voltage in the secondary coil? (b) Calculate the current in the secondary coil? (c) Assuming that the transformer secondary is driving a resistive load, calculate the average power dissipated in the resistor.
Problem 9. (0.2 pts). An ideal step-down transformer has a primary coil of 370 turns and...
Problem 9. (0.2 pts). An ideal step-down transformer has a primary coil of 370 turns and a secondary 22 turns. Its primary coil is plugged into an outlet with 115 V, from which it draws a current coil of of 0.29 A. (a) What is the voltage in the secondary coil? (b) Calculate the current in the secondary coil? (c) Assuming that the transformer secondary is driving a resistive load, calculate the average power dissipated in the resistor.
An ideal transformer has 4500. turns in its primary (input) and 14500. turns in its secondary...
An ideal transformer has 4500. turns in its primary (input) and 14500. turns in its secondary (output). 10.0-V ac is connected to the primary (input). a) What is the voltage on the secondary (output)? b) What is the secondary (output) current if an 8.00-Ω resistor is connected to the secondary (output)? c) What is the power supplied to the primary (input)?
An ideal transformer has 4500. turns in its primary (input) and 14500. turns in its secondary...
An ideal transformer has 4500. turns in its primary (input) and 14500. turns in its secondary (output). 10.0-V ac is connected to the primary (input). a) What is the voltage on the secondary (output)? b) What is the secondary (output) current if an 8.00-Ω resistor is connected to the secondary (output)? c) What is the power supplied to the primary (input)?
PLEASE SO PART C, THANK YOU WILL RATE. A single-phase transformer with a 5:1 turns ratio...
PLEASE SO PART C, THANK YOU WILL RATE.
A single-phase transformer with a 5:1 turns ratio is connected to a 600 V voltage source on the primary side, and a 5 Ω resistor on the secondary. A current of 22 amps of current is measured to flow through the 5 Ω resistor on the secondary side. The real power flowing into the transformer primary is measured at 2500 W. You can neglect Lm and Rc (the magnetizing inductance and core...
1. A step down transformer with a turns ratio of 6 to 1 has 120V applied...
1. A step down transformer with a turns ratio of 6 to 1 has 120V applied to its primary coil. A 25Ω load resistor is connected to the secondary coil. Calculate the following (3+2+2 -7 Points) Secondary coil voltage Secondary coil current Primary coil current a. b. c. 2. A step up transformer has a primary coil current of 1SA and an applied voltage of 220V. The secondary coil current is 5A. Calculate the following (3+3+2+2-10 Points) Secondary coil voltage...
An ideal transformer has a primary winding with 100 turns and a secondary winding with 20...
An ideal transformer has a primary winding with 100 turns and a secondary winding with 20 turns. If the primary winding has a voltage drop of 10 V AC, what is the EMF in the secondary coil? A. 100 V AC B. 10 V AC C. 2 V AC D. 20 V AC
Al. A 1 kVA single-phase step-down transformer is connected to a 220 V, 50 Hz A.C. source and delivers power to a load. The winding resistance and reactance at secondary side are 0.02 2 and 0.1 12 respectively. The maximum value of core flux is 0.248 mWb and the secondary winding contains 1000 turns. Evaluate a. b. the voltage induced on the secondary side; the turn ratio of primary side to secondary side; the rated current on both sides; and...
A single-phase 100-kVA, 2400/240-volt, 60-Hz distribution transformer is used as a step-down transformer. The load, which is connected to the 240-volt secondary winding, absorbs 80 kVA at 0.8 power factor lagging and is at 230 volts. Assuming an ideal transformer, calculate the following: a) primary voltage. b) load impedance. c) load impedance referred to the primary. d) the real and reactive power supplied to the primary winding
Problem 9. (0.2 pts). An ideal step-down transformer has a primary coil of 370 turns and a secondary 22 turns. Its primary coil is plugged into an outlet with 115 V, from which it draws a current coil of of 0.29 A. (a) What is the voltage in the secondary coil? (b) Calculate the current in the secondary coil? (c) Assuming that the transformer secondary is driving a resistive load, calculate the average power dissipated in the resistor.
PLEASE SO PART C, THANK YOU WILL RATE.
A single-phase transformer with a 5:1 turns ratio is connected to a 600 V voltage source on the primary side, and a 5 Ω resistor on the secondary. A current of 22 amps of current is measured to flow through the 5 Ω resistor on the secondary side. The real power flowing into the transformer primary is measured at 2500 W. You can neglect Lm and Rc (the magnetizing inductance and core...
1. A step down transformer with a turns ratio of 6 to 1 has 120V applied to its primary coil. A 25Ω load resistor is connected to the secondary coil. Calculate the following (3+2+2 -7 Points) Secondary coil voltage Secondary coil current Primary coil current a. b. c. 2. A step up transformer has a primary coil current of 1SA and an applied voltage of 220V. The secondary coil current is 5A. Calculate the following (3+3+2+2-10 Points) Secondary coil voltage...
Most questions answered within 3 hours.
-
3) What are the typical social structures in a global city?
asked 19 minutes ago -
Luther Corporation
Consolidated Balance Sheet
December 31, 2019 and 2018 (in $ millions)
Assets
2019
2018...
asked 21 minutes ago -
(Expected rate of return and risk) Carter Inc. is evaluating a
security. Calculate the investment’s expected...
asked 3 hours ago -
What specific indicators can point to lack of progress for
African Americans in American society?
asked 4 hours ago -
1-The Electrons in a beam are moving at 2.7×108 m/s in an
electric field of 15000...
asked 4 hours ago -
A gas tank is a vertical cylinder. It has a radius of 1m, a
height of...
asked 4 hours ago -
Accent Software faces the following conditions. All of these
support Accent’s use of a market-penetration pricing...
asked 5 hours ago -
A mathematically inclined friend emails you the following
instructions: "Meet me in the cafeteria the first...
asked 5 hours ago -
A monopoly sells in two countries . The demand curves in the two
countries are p1...
asked 6 hours ago -
A .15kg rubber ball is bounced off a wall. Before hitting the
wall, the ball moves...
asked 7 hours ago -
A manufacturing company preparing to build a new plant is
considering three potential locations for it....
asked 7 hours ago -
B. If compound Y has approximately the same values of solubility
in toluene as compound X,...
asked 8 hours ago