please quickly
Q=65
For each phase, the star connected load formed by the series connected elements whose values are Ry = 8Ω and Ly = 0.1H is connected to the star connected three phase voltage source with the line with the impedance Z = 3 + j5 Ω for each phase. What should be the effective value of the voltage source so that the load can absorb reactive power of total Q kVAr? What would be the tension at the load ends in this case? Carry out the calculations after drawing the circuit. The mains frequency is 50 Hz.
please quickly Q=65 For each phase, the star connected load formed by the series connected elements...
A balanced delta connected load of 15+?18 Ω per phase is connected at the end of a three-phase line as shown in Figure 1. The line impedance is 1+?2 Ω per phase. The line is supplied from a three-phase source with a line-to-line voltage of 207.85 V rms. Taking the phase voltage ??? as reference, determine: 1. Total complex powers of the line and the load. 2.A delta connected capacitor bank is connected in parallel with the load to improve...
1. (50 Points) angle phase voltage source supplies an RL load connected in parallel configuration throu given below: Load: R 500 and X j50 Ω. The voltage across the load is 20 kV. wire impedance : 2.5 +j20 Ω. Answer the following questions: (a) Represent the circuit in phasor domain. (b) Calculate the phasor current through the wire. (c) Calculate the voltage across the source. (d) Calculate the phasor current through the load resistance. (e) Calculate the complex power supplied...
A three-phase generator connected in a star generates a phase voltage of Vθ = 2500 Vrms and supplies a delta-connected three-phase load. The three phases of the generator feed 3 equal charges each composed of R = 10 Ω, XC = 4Ω and XL = 10Ω. a) Calculate the phase, line and load currents b) Calculate the phase, line and load voltages c) Calculate the powers of Apparent (S), Real (P) and Reactive (Q) delivered by the generator d) Calculate...
Two electrical loads are connected in parallel to a 380 V, 50 Hz, three phase supply. The first load consists of three identical impedance each 7 Ω resistance and 5Ω inductive resistance, connected in star. The second load consists of three identical impedances, each 12 Ω resistance and 8 Ω capacitive reactance connected in delta. Sketch the arrangement described above Calculate Zph1 and Zph2[Zph1= 8.6Ω 35.54°; Zph2= 14.42 Ω -33.69°] Determine Iph1 and Iph2[Iph1= 25.51A -35.54°; Iph2= 26.35A +33.69°] IL1...
A three-phase generator connected in a star generates a phase voltage of Vθ = 24 KVrms and supplies a three-phase transformer connected in star. The transformation ratio is 115: 1. Each of the three coils of the secondary transformer feed 3 equal charges each composed of them by R = 18Ω, XC = 2Ω and XL = 20Ω. a) Calculate the phase, line and charge currents after the b) Calculate the phase, line and load voltages c) Calculate the Apparent...
A three-phase generator connected in star generates a phase voltage of Vθ = 220 Vrms and supplies a three-phase load also connected in star. The three phases of the generator are connected to the three loads shown Remember that the return of the current of each charge is through the Neutral. a) Calculate the phase, line, load and neutral currents b) Calculate the phase, line and load voltages c) Calculate the powers of Apparent (S), Real (P) and Reactive (Q)...
Please quickly .I will grade 2. Three balanced three-phase loads are connected in parallel. Load 1 is Y- connected with an impedance of 400 + 13001/0 load 2 is A-connected with an impedance of 2400 - 218000/0; and load 3 is 172.8 + j2203.2 kVA. The loads are fed from a distribution line with an impedance of 2 + j1612/0. The magnitude of the line-to-neutral voltage at the load end of the line is 24V3 kv. a) Calculate the total...
10. Two loads connected in parallel draw a total of 2.4 kW at 0.8 pflagging from a 120-V rms, 60- Hz line. One load absorbs 1.5 kW at a 0.707 pf lagging. Determine: (a) the pf of the second load, INV 11. Calculate the line currents for the system shown in figure. Calculate also the total power and reactive power consumed by the load. w 12. For the balanced three-phase circuit in Fig.. Calculate the line currents, the phase voltage...
I just need answers to f,g,and h connected motor is connected to Vi-L 120 3T/6 V-rms, 50 Hz three e resistance and inductance of each phase is 8-Ω and 0.04 H, respectively. The PS. A three-phase phase source. The wire between a source and the motor has 0.1-Ω of resistance and 1 mH inductance. nd the phase voltage. (2 pts.) a single-phase diagram of the system with its values. (5 pts.) c) Find the line current (magnitude and phase) for...