Given a three-phase delta system with phase voltage of 240V and phase current of 25A, determine...
Given a three-phase delta system with phase voltage of 240V and phase current of 25A, determine
a) the line current and line-to-line voltage values
b)the total true power output of the system, if the power factor equals 0.90
Homework Answers
Add Answer to:
Given a three-phase delta system with phase voltage of 240V and
phase current of 25A, determine...
Given a three phase wye system with phase voltages of 240V and phase current of 25A,...
Given a three phase wye system with phase voltages of 240V and phase current of 25A, determine, (a) the line current and line-to-line voltage values (b) the total true power out put of the system, if the power factor equals 0.90
A 240V three phase power system supplies two loads in parallel: Load 1: measured line current...
A 240V three phase power system supplies two loads in parallel: Load 1: measured line current 30A, power factor 0.85 lagging, and Load 2: measured power 10kW, reactive power -7.5kVar A. Determine the power factor of load 2. B. Determine the total real power (in kW), reactive power (in kVAR), apparent power (in kVA), power factor and line current (in A) of the two loads.
4-9 Question Completion Status: QUESTION 4 A three phase delta source is connected to a three...
4-9
Question Completion Status: QUESTION 4 A three phase delta source is connected to a three phase transformer. The primary of the transformer is connected in a delta configuration The line voltage on the primary is 240V. The turns ratio is 2:1. The secondary of the transformer is connected in a wye configuration. A wye connected load is attached to the secondary of the transformer. Each of the three load resistors has a resistance of 10 ohms. What is the...
52. In three-phase power systems, the delivered power a. falls to zero three times per cycle...
52. In three-phase power systems, the delivered power a. falls to zero three times per cycle b. falls to zero once per cycle c. never falls to zero d. none of the above 53. The three-phase connection in which one end of each of the windings are connected together is called the connection. a. delta b. wye c. open delta d. open wye 54. In a three phase connection, the voliage meaured direety across one of the winings is the...
d) Consider an ideal, single-phase 2400V-240V transformer. The primary is connected to a 2200V source and...
d) Consider an ideal, single-phase 2400V-240V transformer. The
primary is connected to a 2200V source and the secondary is
connected to an impedance of 2Ω ∠36.9o , find all the values in
Table 1.
Table 1
No
Parameters
1
The secondary output current and voltage.
2
The primary input current
3
The load impedance as seen from the primary side.
4
The input and output apparent power
5
The output power factor
e) A 30MVA 33/11 kV star-delta three phase...
please take note the question is extend a) A single phase 240V 50Hz supply is supplying...
please take note the question is extend
a) A single phase 240V 50Hz supply is supplying a power to a load which consist of 500 resistance and 0.3H inductance through a cable which has an effective impedance of 1+j2 0. The equivalent circuit of the single-phase system is shown in Figure Q1(a). Zcable=1+j2 I Load 5092 240V 50Hz Supply V Load 0.3H Figure Q1(a): A single phase system. i. ii. Determine the load current, low and the load voltage Vood...
A balanced three-phase delta-connected load is connected to a balanced three-phase delta-connected source via a transmission...
A balanced three-phase delta-connected load is connected to a balanced three-phase delta-connected source via a transmission line. The line-line voltage for the source is 100∟0° V/phase and the impedance of load is (27 + j18) Ω/phase. The transmission line has an impedance of (1 + j4) Ω/line. a) Draw the complete schematic of the power system showing the location of wattmeters. (Two-Wattmeter system is considered for this problem). Phase “a” could be considered as a reference phase. b) What must...
2) The reactive power of the balanced Y-Y connected three phase system depicted below is to be co...
2) The reactive power of the balanced Y-Y connected three phase system depicted below is to be compensated by adding shunt capacitors. The network frequency is known as 50 Hz. The load resistances are R 330ΣΩ and the load inductances are L H. The phasor of the voltage for R phase is given as V 220/2 Volts. a) Find the followings before connecting the power factor compensation capacitors: i) The effective values of the line currents IR, Is, IT, ii)...
A three phase full-wave AC controller in Figure Q5(a) is supplied to a system with Y...
A three phase full-wave AC controller in Figure Q5(a) is supplied to a system with Y connected load system. The load consists of R = 100 and L = 0.01 mH which are connected in series between them. The line-to-line input voltage is given as 208 V with 50 Hz and the delay angle is given as a = 271/3. (1) Calculate the rms value of output phase voltage. (3 marks) (ii) Determine the power factor at output based on...
A three-phase, delta-connected, two-pole, synchronous generator is connected to a 60 Hz, 13.5 kV (line-to-line), system....
A three-phase, delta-connected, two-pole, synchronous generator is connected to a 60 Hz, 13.5 kV (line-to-line), system. The generator is delivering its rated output power, under which conditions pfload = 0.8 lagging and |SI = 20 MVA. The generator per-phase model parameters at rated load are. RA = 0.5 2 Xss = 522 9. What is the generator's line-to-line voltage regulation? Is the voltage regulation positive or negative? 10. If the field current is held at the rated load value, but...
A 240V three phase power system supplies two loads in parallel: Load 1: measured line current 30A, power factor 0.85 lagging, and Load 2: measured power 10kW, reactive power -7.5kVar A. Determine the power factor of load 2. B. Determine the total real power (in kW), reactive power (in kVAR), apparent power (in kVA), power factor and line current (in A) of the two loads.
4-9
Question Completion Status: QUESTION 4 A three phase delta source is connected to a three phase transformer. The primary of the transformer is connected in a delta configuration The line voltage on the primary is 240V. The turns ratio is 2:1. The secondary of the transformer is connected in a wye configuration. A wye connected load is attached to the secondary of the transformer. Each of the three load resistors has a resistance of 10 ohms. What is the...
52. In three-phase power systems, the delivered power a. falls to zero three times per cycle b. falls to zero once per cycle c. never falls to zero d. none of the above 53. The three-phase connection in which one end of each of the windings are connected together is called the connection. a. delta b. wye c. open delta d. open wye 54. In a three phase connection, the voliage meaured direety across one of the winings is the...
d) Consider an ideal, single-phase 2400V-240V transformer. The
primary is connected to a 2200V source and the secondary is
connected to an impedance of 2Ω ∠36.9o , find all the values in
Table 1.
Table 1
No
Parameters
1
The secondary output current and voltage.
2
The primary input current
3
The load impedance as seen from the primary side.
4
The input and output apparent power
5
The output power factor
e) A 30MVA 33/11 kV star-delta three phase...
please take note the question is extend
a) A single phase 240V 50Hz supply is supplying a power to a load which consist of 500 resistance and 0.3H inductance through a cable which has an effective impedance of 1+j2 0. The equivalent circuit of the single-phase system is shown in Figure Q1(a). Zcable=1+j2 I Load 5092 240V 50Hz Supply V Load 0.3H Figure Q1(a): A single phase system. i. ii. Determine the load current, low and the load voltage Vood...
2) The reactive power of the balanced Y-Y connected three phase system depicted below is to be compensated by adding shunt capacitors. The network frequency is known as 50 Hz. The load resistances are R 330ΣΩ and the load inductances are L H. The phasor of the voltage for R phase is given as V 220/2 Volts. a) Find the followings before connecting the power factor compensation capacitors: i) The effective values of the line currents IR, Is, IT, ii)...
A three phase full-wave AC controller in Figure Q5(a) is supplied to a system with Y connected load system. The load consists of R = 100 and L = 0.01 mH which are connected in series between them. The line-to-line input voltage is given as 208 V with 50 Hz and the delay angle is given as a = 271/3. (1) Calculate the rms value of output phase voltage. (3 marks) (ii) Determine the power factor at output based on...
A three-phase, delta-connected, two-pole, synchronous generator is connected to a 60 Hz, 13.5 kV (line-to-line), system. The generator is delivering its rated output power, under which conditions pfload = 0.8 lagging and |SI = 20 MVA. The generator per-phase model parameters at rated load are. RA = 0.5 2 Xss = 522 9. What is the generator's line-to-line voltage regulation? Is the voltage regulation positive or negative? 10. If the field current is held at the rated load value, but...
Most questions answered within 3 hours.
-
Please solve with excel and mention the excel function.
Thanks
Kevin deposits $10,000 in a savings...
asked 27 seconds ago -
Which Special Journal would the following transaction be
journalized in?
Sold merchandise on account to Customer...
asked 12 minutes ago -
Assuming 100% dissociation, calculate the freezing point (?fTf)
and boiling point (?bTb) of 1.45 ? K3PO4(aq)1.45...
asked 14 minutes ago -
An inflated helium balloon with a volume of 0.35L at
sea level (1.0 atm) was allowed...
asked 16 minutes ago -
Python 3.0 Please
Write a function that takes, as arguments, a binary string, a
list of...
asked 44 minutes ago -
(a) Calculate the momentum of a 2150 kg elephant charging a
hunter at a speed of...
asked 32 minutes ago -
all the following is an example of a fixed cost except: any cost
that changes in...
asked 34 minutes ago -
Briefly describe the changes in pupil diameter that occur with
changes in light intensity or distance...
asked 34 minutes ago -
A small sample from a vial of phenol melts at 39-40 °C. A larger
sample from...
asked 36 minutes ago -
Draw a δ-lysine amino acid and label all the carbons (alpha,
beta, gamma, etc.)
asked 49 minutes ago -
A uniform thin rod of length 0.97 m and mass 2.2 kg lies in a
horizontal...
asked 42 minutes ago -
A 110 kg horizontal beam is supported at each end. A 340 kg
piano rests at...
asked 43 minutes ago