A balanced Y-connected load with a phase impedance of 10 + j 4 Ω is supplied by a balanced, positive sequence Δ-connected voltage source having Vab 208∠0o V. Given that the line impedance is 0.8 + j 0.3 Ω per phase.
(i) Construct a single-phase equivalent circuit of the three-phase system.
(ii) Calculate the phase currents of the load.
(iii) Calculate the line voltages at the load.
A balanced Y-connected load with a phase impedance of 10 + j 4 Ω is supplied...
A balanced Y connected load with a phase impedance of 40+j25Ω is supplied by a balanced, positive sequence ∆-connected source with a line voltage of 210V. Calculate the phase currents. Use Vab as a reference.
Q1.A balanced 3-Phase Y-connected generator with positive sequence has an impedance of 0.2 + 0.5j ф and an intemal voltage of 120 V/d. The generator feeds a balanced 3- Phase Y-connected load having an impedance of 39 + 28j Ωφ. The impedance of the line connecting the generator to the load is 0.8 + 1Sj Ωφ. The a-phase internal voltage of the generator is specified as the reference phasor a) Construct the a-phase equivalent circuit of the system b) Calculate...
A balanced, positive-sequence, Y-connected voltage source with Ean-277Vr is applied to a balanced-A load with Za-30+jd0)Ω The line impedance between source and load is ZL-(4+j3Q for each phase. Determine: a. Convert the Δ-load to its equivalent Y-load, and sketch the circuits b. Line currents C. The Δ-load currents d. Voltages at the load terminals
A Δ-connected source supplies power to a Y-connected load in a three-phase balanced system. Given that the line impedance is (1 + j1) Ω per phase while the load impedance is (6 + j4) Ω per phase, find the magnitude of the line voltage at the load. Assume the source phase voltage Vab= 208 ∠0° V rms. The magnitude of the line voltage at the load is _______ Vrms.
1. The phase voltage at the terminals of a balanced three-phase Y-connected load has an amplitude of 120V. The load has an impedance of 39 + j28Ω per phase. It is fed from a line having an impedance of 0.8 + j1.5 Ω per phase. The Y-connected source at the sending end of the line has an internal impedance of 0.2 + j0.5 Ω per phase. Calculate: a) The three line currents b) The three-phase voltages at the load c) ...
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
A balanced Y -connected load having an impedance of 92+j21Ω/ϕ is connected in parallel with a balanced Δ -connected load having an impedance of 150∠ 0 ∘ Ω/ϕ . The paralleled loads are fed from a line having an impedance of j1Ω/ϕ . The magnitude of the line-to-line voltage of the Δ -load is 8150 V . A. Calculate the magnitude of the current in the line feeding the loads. B. Calculate the magnitude of the phase current in the...
8.25 A three-phase balanced \(Y\) -connected load with series impedances of \((8+j 24) \Omega\) per phase and mutual impedance between any two phases of \(j 4 \Omega\) is supplied by a three-phase unbalanced source with line-to-neutral voltages of \(V_{a n}=200 \angle 25^{\circ}, V_{b n}=100 \angle-155^{\circ}\), \(V_{c n}=80 \angle 100^{\circ} \mathrm{V}\). The load and source neutrals are both solidly grounded. Determine: (a) the load sequence impedance matrix, (b) the symmetrical components of the line-toneutral voltages, (c) the symmetrical components of the...
5 points uestion # Part-l Figure 4 shows a Δ-A configuration of a Δ-connected 3-phase source supplying power to a Δ- connected 3-phase load. The following parameters are known Source Voltage Source Impedance Load Impedance Feeder Impedance y, = 180.0-v (rms) z, = 0.15 +/0.45 Ω Z1-0.1 +/0.2 Ω lA Vp AB ZA Zi ICA Feeder Lines 3-Phase Source Balanced Load Figure 4 a. Compute the line currents IA IB, and lc. (5 points) b. Find the load currents IAB,...