For a 3 phase power system that operates at 208V in a Y connected configuration
and it draws a line current of 20.0 A. The Power Factor is 0.80. Electricity costs
$0.18 / kWhr. Answer the following:
a. What is the phase voltage of the system?
b. What is the phase current for the system?
c. How much apparent power is being delivered to the system?
d. What is the real power delivered to the system?
e. In 8 hours, how much would you spend for electricity consumption
For a 3 phase power system that operates at 208V in a Y connected configuration and...
A 3-phase Y-connected motor is connected to a three phase Y-connected source with 440V line voltage. It draws a line current of 5A from the source. If the power factor of the motor is 0.8, calculate Active power and Reactive power absorbed by the load Total Apparent power
Three single-phase transformers are connected in a wye-delta configuration to step down a line voltage of 13.8kV to 4160V to supply an industrial facility. The plant draws 8MW at a 0.80 power factor. Transformer impedances can be neglected. Calculate the following: a. the apparent power (SL) drawn by the load/plant. b. the apparent power (Ss) furnished by the HV source. c. the current in the HV lines (141) d. the current in the LV lines (112) e. the currents in...
Please show how this transformers problem is done. Thanks! Problem 3ph [10 pts]: Y-connected source: A Y-connected balanced three-phase source is feeding a balanced three-phase load (it doesn't matter whether the load is Y or Delta connected). The voltage and current of the source are: van (t) - 340 sin (377t + 0.5236) ia(t) 100sin (377t 0.87266) Calculate the following: (a) The rms phase voltage (Van, magnitude and phase). (b) The rms line-to-line voltage (Vab, magnitude and phase) (c) The...
I have seen similar examples of this question. However, for both 208V and 280V AC power system, the line-to-line voltage seems to be the same which 120V and that does not make sense. Can you please justify that in the solution? A 280-V, 3Ø AC power system, Y-connected three-phase generator connected through a three-phase transmission line to a A-connected load. The transmission line has an impedance of (0.06+j0.12) S2/phase, and the load has an impedance of (12+j9) 92 per phase....
A 3 phase Y connected AC motor operates on 460V, line voltage, and draws 10.0 amps, line current. If the motor produces 10.0 hp at 3500 RPM, answer the following: a. What is the motor efficiency? b. How much power is lost to heat? c. What is the running torque of the motor?
52. In three-phase power systems, the delivered power a. falls to zero three times per cycle b. falls to zero once per cycle c. never falls to zero d. none of the above 53. The three-phase connection in which one end of each of the windings are connected together is called the connection. a. delta b. wye c. open delta d. open wye 54. In a three phase connection, the voliage meaured direety across one of the winings is the...
2. A load is connected to a voltage of 1320 volts at 60 Hz. The load dissipates 100 kW with a 0.867 power factor. Specify the capacitance needed to correct the power factor to being 1. 3. Consider a circuit for a single-phase AC power system, where a 200 volt AC voltage source is delivering power to a loads. Find the true power, reactive power and apparent power delivered by 150 mA current (Impedance phase angle 0 = 30°) 3....
A three-phase generator connected in a star generates a phase voltage of Vθ = 2500 Vrms and supplies a delta-connected three-phase load. The three phases of the generator feed 3 equal charges each composed of R = 10 Ω, XC = 4Ω and XL = 10Ω. a) Calculate the phase, line and load currents b) Calculate the phase, line and load voltages c) Calculate the powers of Apparent (S), Real (P) and Reactive (Q) delivered by the generator d) Calculate...
A three-phase generator connected in a star generates a phase voltage of Vθ = 24 KVrms and supplies a three-phase transformer connected in star. The transformation ratio is 115: 1. Each of the three coils of the secondary transformer feed 3 equal charges each composed of them by R = 18Ω, XC = 2Ω and XL = 20Ω. a) Calculate the phase, line and charge currents after the b) Calculate the phase, line and load voltages c) Calculate the Apparent...
UISIZULU Problem 4 A three phase, 5 kW, wye-connected load operate onnected load operates at 0.8 power factor lagging with a terminal voltage of 100 V (line to line). The cables connecting e bles connecting each phase of the load to the wye-connected supply has an impedance of (0.25 +0.25) 12. Compute the following: a) Reactive power drawn by the load. b) Real and reactive power losses in the system. me current and line voltage at the source terminals and...