An RLC circuit consists of a 0.1H inductor, 1.5µF capacitor, and
a 100 Ω resistor. It is connected to a 1200 rad/s AC power
source.
If the applied rms voltage is 100 V, what is the resulting rms
current?
An RLC circuit consists of a 0.1H inductor, 1.5µF capacitor, and a 100 Ω resistor. It...
An RLC circuit consists of a 150-Ω resistor, a 21.0-μF capacitor, and a 390-mH inductor connected in series with a 120-V, 60.0-Hz power supply. (a) What is the phase angle between the current and the applied voltage? _____ ° (b) Which reaches its maximum earlier, the current or the voltage? current or voltage?
4) An RLC circuit consists of a resistor, a inductor, and a capacitor connected in series to an AC voltage source with an RMS voltage of 59 volts. At half the resonant frequency, the phase angle is -35 degrees and the inductive reactance is 46 Ohms. What is the average dissipated power at twice the resonant frequency in Watts?
An RLC circuit consists of a resistor, a inductor, and a capacitor connected in series to an AC voltage source with an RMS voltage of 74 volts. At half the resonant frequency, the phase angle is -25 degrees and the inductive reactance is 47 Ohms. What is the average dissipated power at twice the resonant frequency in Watts?
A series RLC-circuit consists of a 280 Ω resistor, a 25 mH inductor, and an 18 μC capacitor. What is the rms current if the emf is supplied by 120-V rms voltage, 60 Hz frequency?
Question 4 4) An RLC circuit consists of a resistor, a inductor, and a capacitor connected in series to an AC voltage source with an RMS voltage of 95 volts. At half the resonant frequency, the phase angle is -33 degrees and the inductive reactance is 50 Ohms. What is the average dissipated power at twice the resonant frequency in Watts?
An LRC circuit consists of a 15.0 μF capacitor, a resistor, and an inductor connected in series across an AC power source of variable frequency having a voltage amplitude of 20.0 V. You observe that when the power source frequency is adjusted to 44.5 Hz, the rms current through the circuit has its maximum value of 65.0 mA. What will be the rms current if you change the frequency of the power source to 60.0 Hz? {? A}
in a certain RLC circuit, a 32- resistor, a 18-mH inductor, and a 5-F capacitor are connected in series with an AC power source for which V -16 Vand f = 100 Hz. (a) Calculate the amplitude of the current, (b) Calculate the phase between the current and the voltage, (c) Calculate the maximum voltage across each component. {0.0733 A. -1.47 rad, VR-2.35 V, Vc = 23.3 V, V.- 0.829 V?
Check my work please: 4) An RLC circuit consists of a resistor, a inductor, and a capacitor connected in series to an AC voltage source with an RMS voltage of 51 volts. At half the resonant frequency, the phase angle is 24 degrees and the inductive reactance is 46 Ohms. What is the average dissipated power at twice the resonant frequency in Watts? 그mt : 2902. 83-t 81212723.3c -2イイ·m)
An RLC circuit consists of a 324 Ohm resistor, a 8 milli-henrie inductor, and a capacitor connected in series to an AC voltage source. At a frequency of 53 kilo-hertz, the phase angle is +79 degrees. What is the resonant frequency of the circuit in kilo-hertz?
An RLC circuit consists of a 379 Ohm resistor, a 5 milli-henrie inductor, and a capacitor connected in series to an AC voltage source. At a frequency of 53 kilo-hertz, the phase angle is +62 degrees. What is the resonant frequency of the circuit in kilo-hertz?