A ceramic having a porosity of 15% is found to have a Young's modulus of 35×106psi. What is Young's modulus of the fully-dense ceramic?
A ceramic having a porosity of 15% is found to have a Young's modulus of 35×106psi....
Eleven resilient modulus observations of a ceramic mixture of type A are measured and found to have a sample average of 18.42 psi and sample standard deviation of 2.77 psi. Ten resilient modulus observations of a ceramic mixture of type B are measured and found to have a sample average of 19.28 psi and sample standard deviation of 2.41 psi. (a) Is there sufficient evidence to support the claim that type A ceramic has larger variability than type B? Use...
Eleven resilient modulus observations of a ceramic mixture of type A are measured and found to have a sample average of 18.42 psi and sample standard deviation of 2.77 psi. Ten resilient modulus observations of a ceramic mixture of type B are measured and found to have a sample average of 19.28 psi and sample standard deviation of 2.41 psi. (a) Is there sufficient evidence to support the claim that type A ceramic has larger variability than type B? Use...
The average modulus of rupture of a ceramic material is 400 MPa determined in tests lasting for 15 minutes. The Weibull modulus of the material is 10 and the time exponent is 40. What is the maximum design modulus of rupture allowed for a component (made of this material) with a volume twice as large as the samples tested if the failure probability has to be less than 10 and the life of the component needs to be more than...
A composite of polycrystalline spinel (Young's modulus = 277 GPa) and aligned continuous Kevlar fibers is desired in order to increase the capacity of the spinel to withstand impact. Kevlar fibers have a tensile strength of 3.6 GPa and a Young's modulus of 125 GPa. For a desired composite with Young's modulus of 200 GPa, what is the fiber volume fraction? Use isostrain condition.
5) Consider a bar shown below. Cross-sectional area Ae = 1.2 in., and Young's modulus E = 35 x 106 psi. If ui = 0.02 in, and u2 = 0.025 in., considering linear interpolation, determine the following: (a) the displacement at point P; (b) the strain & and stress o; and (c) the element stiffness matrix. u2 2 x = 20 in. x = 15 in. X = 23 in.
The thicknesses of 55 randomly selected ceramic tiles were found to have a variance of 3.18 Construct the 98% confidence interval for the population variance of the thicknesses of all ceramic tiles in this factory. Round your answers to two decimal places.
Steel Young's Modulus (Y) 20 X 1010 N/m2 Shear Modulus (S) 8.1 X 1010 N/m2 Bulk Modulus (B) 16 X 1010 N/m2 The table to the above represents various properties of steel. You have steel wire 4.4 meters in length that stretches 0.12 cm when subjected to a force of 300 N. 1)What is the diameter of the wire? d1 =__________ cm 3)What would the diameter of the wire be if you wanted the wire to stretch 0.06 cm less...
A 15.4 cm long tendon is found to stretch 2.63 mm when a force of 15 0 N is applied to it. If the tendon is round and as an average diameter of 6.94 mm, calculate the Young's modulus of this tendon Number IUnits
An unknown material is tested in lab, and it is found to have a modulus of elasticity of 10 GPa and a yield strength of 100 MPa. You have available a rod (cylindrical shape, length of 1 meter and cross-sectional area of 2.5 cm2. What is the maximum load that can be applied without plastic deformation, and what it the corresponding deformation resulting from the load?
Shards of clay vessels were put together to reconstruct rim diameters of original ceramic vessels found at the Wind Mountain archaeological site. A random sample of 15 ceramic vessels gave a mean of 15.8 and a standard deviation of 3.5cm. What test would you use to construct a 95% confidence interval for this problem?