Estimate the time for a 15 μH inductor with a 76 Ω resistor to reach maximum current. (answer in microseconds. include at least 1 decimal place)
Please show all steps. Thank you!
Estimate the time for a 15 μH inductor with a 76 Ω resistor to reach maximum...
1 Determine the time constant for a 30mH inductor with a 1kohm resistor. ( answer in microseconds, include at least 2 decimal places) 2. 9mH of inductance are required for an application. The smallest inductor available is 4mH. What size inductor can be combined with 14mH inductor to meet the requirements? (Answer in mH, include. At least one decimal)
A battery is connected in series with a 2.9 Ω resistor and a 15 mH inductor. The maximum current in the circuit is 130 mA. Find the time constant of the circuit
You have a 250-Ω resistor and a 0.360-H inductor. Suppose you take the resistor and inductor and make a series circuit with a voltage source that has a voltage amplitude of 31.0 V and an angular frequency of 200 rad/s. Q]Construct the phasor diagram. Draw the force vectors with their tails at the dot. The orientation of your vectors will be graded. Include: 1) Vr (Resistor Voltage Phasor), 2) Vl (Inductor Voltage Phasor) and 3) I (Current Phasor)
A 35.0-V battery with negligible internal resistance, a 50.0-Ω resistor, and a 1.25-mH inductor with negligible resistance are all connected in series with an open switch. The switch is suddenly closed. How long after closing the switch will the current through the inductor reach one-half of its maximum value? How long after closing the switch will the energy stored in the inductor reach one-half of its maximum value?
A) at what time t_a will the current in the circuit reach 1/2 of its maximum value? B) at what time t_b will the energy stored in the inductor reach 1/2 of its maximum value? Problem 5 (10 POINTS) A battery, ε-30.0V, a resistor, R = 40.00, and an inductor, L-1.5mH, are con- nected in series with an open switch. The switch is then closed at time t = 0. (a) At what time ta will the current in the...
A 1.15-kΩ resistor and a 600-mH inductor are connected in series to a 1350-Hz generator with an rms voltage of 12.2 V . Part A: What is the rms current in the circuit? Part B:What capacitance must be inserted in series with the resistor and inductor to reduce the rms current to half the value found in part A? Please show with steps, thank you! Item 15 < 15 of 15 A 1.15-k22 resistor and a 600-mH inductor are connected...
A 9.5-V battery is connected in series with a 44-mH inductor, a 180-Ω resistor, and an open switch. 1. What is the current in the circuit 0.120 msms after the switch is closed? Express your answer using two significant figures. 2. How much energy is stored in the inductor at this time? Express your answer using two significant figures.
1Calculate the reactance of a 7 H inductor at a frequency 300 Hz? 2.If an RL circuit has a 40 Ω resistor in series with a 9 mH inductor, what will it’s impedance be at 450Hz? 3)An RL circuit has a 5 kΩ resistor and a 1.5 H inductor. At what frequency will the current lag the voltage by π/3? 4)An RL circuit has a 500 Ω resistor and a 0.1 H inductor. This circuit is driven by a 100...
Please help, I'm struggling. Thank you An RL circuit comprised of one resistor and one inductor is shown in the figure below. The resistor and inductor are connected to a source of emf with negligible internal resistance by a switch a. The emf for this circuit is 12.0V. The resistance of the resistor is 0.35 12, and the inductance of the inductor is 53 mH. For the circuit below: a. Sketch the graph of current through the inductor as a...
Assist ne please Question 3 NAME: The circuit shown below contains two switches which open and close perfectly out of phase with one another (only one is open at any given time, and once one closes the other immediately opens, and vice-versa). The switches alternate at a frequency of 10kHz, and each switch spends 50% of the time open and 50% of the time closed (ie, each switch is open for 100 microseconds and then closed for 100 microseconds). The...