Water is flowing in a 12-inch pipe inclined downward on a slope of 10% as shown below. The discharge is 1000 gpm and piezometers located 30 ft. apart measure a difference in piezometric head of 0.1 ft.
a) What is the pressure drop across the pipe?
b) What is the shear stress exerted on the pipe boundary?
c) What is the shear velocity?
d) What is the Darcy friction factor?
Water is flowing in a 12-inch pipe inclined downward on a slope of 10% as shown...
A 1-mile long 12-inch diameter asphalt dipped cast iron pipe (e = 0.00085 ft) conveys 60°F water at 3 cfs. Determine (a) friction factor f using the Moody Diagram, (b) f using the Colebrook equation, (c) head loss over the 1 mile distance, (d) slope of the EGL. Problem 2 A 1-mile long 12-inch diameter asphalt dipped cast iron pipe (e = 0.00085 ft) conveys 60℉ water at 3 cfs Determine (a) friction factor fusing the Moody Diagram, (b) fusing...
L 2. Steady statemass balance: Water is flowing at steady state in a 0.1 meter-diameter pipe with a maximum velocity (turbulent profile) of 0.3 meters/sec. The pipe then goes through an expansion, to where it is then flowing in a 0.5 meter-diameter pipe, and the flow regime has changed from turbulent to laminar. In the second section of pipe, calculate the velocity as (a) block flow profile (Vavg), and (b) maximum velocity in laminar flow profile? HINT: you will need...
CENTRE INDEX NUMBER SECTION B 30 marks] Calculate the discharge through a pipe of diameter 200 mm when the difference of pressure head between the ends of the pipe 500 m apart is 4 m of water. Take the value off= 0.009 in the formula hl= a) 19.5e/s b)2.0es e)03 m's d) 29.3 e/s 2. A scale 1:50 scale model of ship is towed through sea water at a speed of 1 ms. A force of 2 N is required...