a steam power plant operates on a simple idea Rankine cycle between the pressure limits of...
a steam power plant operates on a simple idea Rankine cycle between the pressure limits of 6.0 MPa and 1.0 MPa. The steam enters the turbine at 450 C and is cooled in the condenser.
solve the following questions:
a) determine the thermodynamics properties (pressure and
temperature) for every state of the cycle. Show T-s diagram.
b) Analyse the cycle by calculating the energy interaction for the four main processes of the cycle. Calculate the thermal efficiency of the the cycle.
c) If the temperature limit entering the turbines is increased to 600 C for the above same cycle, discuss the effects on the cycle efficiency and the energy interaction between the system.
Homework Answers
Add Answer to:
a steam power plant operates on a simple idea Rankine cycle
between the pressure limits of...
A steam power plant operates on a simple ideal Rankine cycle between the pressure limits of...
A steam power plant operates on a simple ideal Rankine cycle between the pressure limits of 6 MPa and 50 kPa. The temperature of the steam at the turbine inlet is 450◦C, and the mass flow rate of steam through the cycle is 50 kg/s. (a) Find the temperature, pressure and specific volume at states 1, 2, 3, and 4. (b) Find the heat supplied, heat rejected, work consumed by the pump, work produced by the turbine, net power generation,...
Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters...
Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500°C and is cooled in the condenser at a pressure of 10 kPa. Assume an isentropic efficiency of 85 percent for both the turbine and the pump. (a) the quality of the steam at the turbine exit (b) the thermal efficiency of the cycle (c) the mass flow rate of the steam.
Q1. A steam power plant operates on a simple ideal Rankine cycle between the pressure limits...
Q1. A steam power plant operates on a simple ideal Rankine cycle between the pressure limits of 4 MPa and 50 kPa. The temperature of the steam at the turbine inlet is 300°C, and the mass flow rate of steam through the cycle is 35 kg/s. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the thermal efficiency of the cycle and (b) the net power output of the power plant. 02
A steam power plant operates on an ideal reheat Rankine cycle between the pressure limits of...
A steam power plant operates on an ideal reheat Rankine cycle between the pressure limits of 5 MPa and 100 kPa. The temperature of the steam att the turbine is 500 C degree and the mass flow rate of steam through the cycle is 35 kg/s. a) Determine the thermal efficiency of the cycle. b) determine the net power output of the power plant ( Assume both the turbine and the pump have isentropic efficiency of 100%). c) Draw the...
2) Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam...
2) Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500°C and is cooled in the condenser at a pressure of 10 kPa. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the quality of the steam at the turbine exit, (b) the thermal efficiency of the cycle, and (c) the mass flow rate of the steam.
Problem 10.3: Consider a 300-MW steam power plant that operates on a simple ideal Rankine cycle....
Problem 10.3: Consider a 300-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500°C and is cooled in the condenser at a pressure of 10 kPa. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the quality of the steam at the turbine exit, (b) the thermal efficiency of the cycle, and (c) the mass flow rate of the steam.
A steam plant operates on a reheat Rankine cycle and has a net power output of...
A steam plant operates on a reheat Rankine cycle and has a net power output of 80MW. Steam enters the high pressure turbine at 10 MPa and 500 °C and the low pressure turbine at 1 MPa and 500 °C. Steam leaves the condenser as a saturated liquid at a pressure of 10kPa. The efficiency of the turbine is 80% and the efficiency of the pump is 95%. Determine the thermal efficiency of the cycle. Rankine Cycle with Reheat
A steam power plant operates on the reheat Rankine cycle. Steam enters the high-pressure turbine at...
A steam power plant operates on the reheat Rankine cycle. Steam enters the high-pressure turbine at 12.5 MPa and 5508C at a rate of 7.7 kg/s and leaves at 2 MPa. Steam is then reheated at constant pressure to 400 C before it expands in the low-pressure turbine. Steam leaves the condenser as a saturated liquid. The exit of the turbine is saturated at the condenser pressure (a) the condenser pressure, (b) the net power output, and (c) the thermal...
. A steam power plant that operates on Rankine cycle has a net power output of...
. A steam power plant that operates on Rankine cycle has a net power output of 45 MW. Steam enters the turbine at 7 MPa and 500o C and is cooled in the condenser at a pressure of 10 kPa by running cooling water from a sea through the tubes of the condenser at rate of 2000 kg/s. Show the cycle on T‐s diagram with respect to saturation line, and determine (a) the thermal efficiency of the cycle, (b) the...
Subject: Thermodynamics A steam power plant operates on a simple ideal Rankine cycle between the pressure...
Subject: Thermodynamics A steam power plant operates on a simple ideal Rankine cycle between the pressure limits of 9 MPa and 10 kPa. The mass flow rate of the steam through the cycle is 60 kg/s. The quality of the steam at the turbine exit is 90 percent. a)What is the turbine inlet temperature in C? b)What is the work output of the turbine in kJ/s?
Q1. A steam power plant operates on a simple ideal Rankine cycle between the pressure limits of 4 MPa and 50 kPa. The temperature of the steam at the turbine inlet is 300°C, and the mass flow rate of steam through the cycle is 35 kg/s. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the thermal efficiency of the cycle and (b) the net power output of the power plant. 02
2) Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500°C and is cooled in the condenser at a pressure of 10 kPa. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the quality of the steam at the turbine exit, (b) the thermal efficiency of the cycle, and (c) the mass flow rate of the steam.
Problem 10.3: Consider a 300-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500°C and is cooled in the condenser at a pressure of 10 kPa. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the quality of the steam at the turbine exit, (b) the thermal efficiency of the cycle, and (c) the mass flow rate of the steam.
A steam plant operates on a reheat Rankine cycle and has a net power output of 80MW. Steam enters the high pressure turbine at 10 MPa and 500 °C and the low pressure turbine at 1 MPa and 500 °C. Steam leaves the condenser as a saturated liquid at a pressure of 10kPa. The efficiency of the turbine is 80% and the efficiency of the pump is 95%. Determine the thermal efficiency of the cycle. Rankine Cycle with Reheat
Most questions answered within 3 hours.
-
What is the pressure inside a 33.0 L container holding 106.4 kg
of argon gas at...
asked 45 minutes ago -
Question no 2
A housekeeping support department budgets its costs at
SR 40,000 per month plus...
asked 41 minutes ago -
A 1400Kg sports car accelerates from rest to 90km/h in 7.0s.
What is the average power...
asked 1 hour ago -
For the following reaction, 0.128 moles of
potassium hydrogen sulfateare mixed with
0.504 moles of potassium...
asked 4 hours ago -
1. What is the present value of $400, three years in the future
if the interest...
asked 5 hours ago -
The labor force minus the number of employed equals the number
of unemployed.
a. True
b....
asked 7 hours ago -
Determine the mass in units of grams [g] of 0.49 moles [mol]
of a new fictitious...
asked 7 hours ago -
A horizontal mass of M=5kg is on a spring and stretched to
x=0.5m when released from...
asked 9 hours ago -
26 of 50
"I have worked at the Arizona Humane Society for ten years, and
have...
asked 9 hours ago -
Compare and contrast zero based budgeting and incremental (or
base year) budgeting.
asked 9 hours ago -
4 pts 10. Which of the following hypothesis would be MOST
difficult to test experimentally? Group...
asked 9 hours ago -
A business owner makes 1,000 items a day. Each day he or she
contributes eight hours...
asked 9 hours ago