Find the force, in N, required to tow a plate (0.5 m x 2 m) at...

Question

Question

Find the force, in N, required to tow a plate (0.5 m x 2 m) at 5 m/s on a 2-mm-thick layer of SAE-30 oil at 38C.

Answer 1

Answer #1

Feel free to ask for further clarification.

please up-vote if you liked this solution. As it will encourage me to solve more and more problems and helping students.

Thank you,

Answer 2

Similar Homework Help Questions

Q3. Problem 2.11.8. A space 16 mm wide between two large plane surface is filled with...

Q3. Problem 2.11.8. A space 16 mm wide between two large plane surface is filled with SAE 30 oil (Figure 1). What force F is required to drag a very thin plate 0.4 m2 area between the surface at a speed v = 0.25 m/s (a) if this plate is equally spaced between the two surfaces, and (b) if t = 5 mm? Use dynamic viscosity at 35°C for SAE 30 oil : Moil = 0.18 N.8/ma. 16 mm -...
Air with a dynamic viscosity of 18.1 x 10 N m/s, a density of 1.2 kg/m'...

Air with a dynamic viscosity of 18.1 x 10 N m/s, a density of 1.2 kg/m' and a free stream velocity of 20 m/s flows over a 0.8 m long by 0.3 m wide flat plate. 20 m/s -0.5 m - -0.8 m a. Find the type of flow on flat plate based on Reynolds number b. Find the boundary layer thickness at distance of 0.5 m from the leading edge c. Find the wall shear stress at a horizontal...
x value =1 yvalue =1 z value =2 A cylinder with a radius of R =...

x value =1 yvalue =1 z value =2 A cylinder with a radius of R = 0.5 m and length L = 2/5 is a part of engine oil SAE 30 tank at the left and to support a water tank at right as shown. The height of SAE 30 is h = 1/2 m. The water tank has an inclined gate ((LAB = 6 1cm. B = 52°). which is hinged at point A. If both tank has 2/5...

Hydrology question 4. (20 pts) Curling is clearly the most exciting sport on Earth. Let's pretend...

Hydrology question 4. (20 pts) Curling is clearly the most exciting sport on Earth. Let's pretend that the bottoms of curling stones are perfectly flat, round, and 12 cm in diameter. Let's also assume that the layer of water overlying the ice is 0.5 mm thick. There probably isn't pressure melting, but we will still assume the water is 4°C, at which temperature the dynamic viscosity is 0.0015 N-s/m2. a) What force must be applied to the side of the...
A 16 mm wide space between two large fixed plane surfaces is filled with SAE 30...

A 16 mm wide space between two large fixed plane surfaces is filled with SAE 30 oil at 35°C. What is the force required to drag a very thin plate of 0.4 m area, located at a distance of 12 mm from the lower plate, at a speed of 0.25 m/s?
Problem #3 Air flows over a flat plate at 4 m/s. An approximation for the x...

Problem #3 Air flows over a flat plate at 4 m/s. An approximation for the x component of velocity in the in- compressible laminar boundary layer is a sinusoidal variation from u-0 at the surface (y-0) to the freestream velocity, U, at the boundary-layer edge (y-5). The equation for the profile is u-Usin( %), where cVx and c is a constant. The boundary layer is 9 mm thick 1 m from the edge of the plate. (a) Predict the boundary-layer...

A block that is a m square slides from left to right across a flat plate...

A block that is a m square slides from left to right across a flat plate on a thin film of oil. The oil has viscosity μ N·s/m2 and the film is h m thick. The block of mass M kg moves at steady speed U m/s under the influence of constant force F N. (a) Find the magnitude of the shear stresses on the bottom of the block. Indicate the direction of the shear stresses on the bottom of...
1. A very smooth flat plate of length L = 0.5 m and width b =...

1. A very smooth flat plate of length L = 0.5 m and width b = 2 m is immersed parallel to a stream of velocity 2 m/s. For both air and water as the working fluids; a. Show that the flow is completely laminar over the entire plate. (5 marks] b. Determine the drag force on one side of the plate. [4 marks] c. Determine the thicknesses , 8*, and at the end of the plate (x = L)....
Find the terminal speed of the block if the block mass is m=6.3 kgm=6.3 kg, A=28...

Find the terminal speed of the block if the block mass is m=6.3 kgm=6.3 kg, A=28 cm2A=28 cm2, θ=16 ∘θ=16 ∘, and the film is 1-mm-thick SAE 30 oil at 20 ∘C∘C.

Problem 2 Engine oil at 80 °C flows over 6-m-long n flat plate whose temperature is...

Problem 2 Engine oil at 80 °C flows over 6-m-long n flat plate whose temperature is 30°C s with a velocity of 3 m/s. Determine the total drag force and the rate of heat transfer over the entire plate per unit width