Homework Answers
Add Answer to:
The figure shows a pair of shaft-mounted spur gears having a diametral pitch of 5 teeth/in with a...
For a pair of spur gears with a diametral pitch of 12, and a 20° degree...
For a pair of spur gears with a diametral pitch of 12, and a 20° degree pressure angle and with the number of teeth on the pinion 11 and the number of teeth on the gear 18, compute all the features of the gear teeth described below: (a) Pitch diameter for the gear, (b) Pitch diameter for the pinion (c) The circular pitch, (d) Addendum, (e) Dedendum, (f) Clearance, (g) Whole depth, (h) The tooth thickness (hint: based on circular...
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/i...
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/in. The gears are grade t steel, through-hardened at 200 Brinell, made to No. 6 quality standards, uncrowned, and are to be accurately and ngid mounted Assume a lion life ofi will transmitareliability of90%(KR 0.85), and use YN 1.355N 01:8 and Z 1. used...
See Figure P12-1. The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6. The teeth are of the 20%, full-depth, involute form. The gear receives 30 hp from a...
See Figure P12-1. The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6. The teeth are of the 20%, full-depth, involute form. The gear receives 30 hp from a pinion directly above it. Compute the torque delivered to the shaft and the tangential and radial forces exerted on the shaft by the gear. Figure P12-1 Shaft carrying a gear and a V-belt drive 0
See Figure P12-1. The shaft rotating...
The accessory drive unit of a large aircraft engine involves an identical pair of 200 full-depth spur gears. The gears have 70 teeth and rotate together at 8000 rpm. The diametral pitch is 12 and...
The accessory drive unit of a large aircraft engine involves an identical pair of 200 full-depth spur gears. The gears have 70 teeth and rotate together at 8000 rpm. The diametral pitch is 12 and the face width 1.0 in. The gears are made of alloy steel, case-hardened to 62RC (680 Bhn). Although the case extends throughout the fillet, it is conservatively decided to use the core hardness of 500 Bhn for calculating fatigue strengths. The tooth profiles are finished...
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is 2 in. The pinion rotates at 1000 rev/min and transmits 50 hp. The shafts are...
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is 2 in. The pinion rotates at 1000 rev/min and transmits 50 hp. The shafts are at 90. Determine the components of the gear tooth force and show these on a sketch of the ge
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is...
(1) A pair of meshing spur gears having 20 degree full depth teeth and face widths...
(1) A pair of meshing spur gears having 20 degree full depth teeth and face widths of 2.5-in, a diametral pitch of 4 and both made of steel having a BHN of 400. The pinion is rotating at 600 pm, has 30 teeth and the velocity ratio is 2/3. Assume uniform power source with moderate shock, less rigid mounting with contact across the full face. Find the maximum horsepower that can be transmitted based on strength using the AGMA method....
See Figure P12-1. The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6. The teeth are of the 20%, full-depth, involute form. The gear receives 30 hp from a...
See Figure P12-1. The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6. The teeth are of the 20%, full-depth, involute form. The gear receives 30 hp from a pinion directly above it. Compute the torque delivered to the shaft and the tangential and radial forces exerted on the shaft by the gear. Figure P12-1 Shaft carrying a gear and a V-belt drive C D 10.004-10.00 6.00 V-belt sheave Gear...
The figure above shows two spur gears mounted on a shaft at A and C. This...
The figure above shows two spur gears mounted on a shaft at A and C. This shaft gear assembly is supported on two pedestal bearings at D and Brespectively. These bearing supports act as simple supports. Neglect the weight of the shaft and the gears. The force on gear 1 is shown at an angle with respect to the vertical "y" axis and the force on gear 2 (Fc-1000 N) is shown at an angle with respect to the horizontal...
2. Fig.2 shows an epicyclic gear train in which the internal teeth on the gears A and B have the same diametral p...
2. Fig.2 shows an epicyclic gear train in which the internal teeth on the gears A and B have the same diametral pitch. Gear A has 88 teeth and gear B has 100 teeth both internally and externally. The sun-wheel C which is keyed to shaft P has 44 teeth and the pinion E keyed to shaft R has 25. There are floating compound planet wheels F, G. The power input to shaft R is 8 kW at 1440 rev/min....
Question is in Metric not imperial MEA35TA/101/0/2019 Question 9 An uncrowned straight-bevel pinion has 30 teeth, a diametral pitch of 6, and a transmission accuracy number of 6. The driven gear h...
Question is in Metric not imperial
MEA35TA/101/0/2019 Question 9 An uncrowned straight-bevel pinion has 30 teeth, a diametral pitch of 6, and a transmission accuracy number of 6. The driven gear has 60 teeth. Both are made of No. 30 cast iron. The shaft angle is 90 . The face width is 1.25 in, the pinion speed is 900 rev/min, and the normal pressure angle is 20.. The pinion is mounted outboard of its bearings: the bearings of the gear...
For a pair of spur gears with a diametral pitch of 12, and a 20° degree pressure angle and with the number of teeth on the pinion 11 and the number of teeth on the gear 18, compute all the features of the gear teeth described below: (a) Pitch diameter for the gear, (b) Pitch diameter for the pinion (c) The circular pitch, (d) Addendum, (e) Dedendum, (f) Clearance, (g) Whole depth, (h) The tooth thickness (hint: based on circular...
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/in. The gears are grade t steel, through-hardened at 200 Brinell, made to No. 6 quality standards, uncrowned, and are to be accurately and ngid mounted Assume a lion life ofi will transmitareliability of90%(KR 0.85), and use YN 1.355N 01:8 and Z 1. used...
See Figure P12-1. The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6. The teeth are of the 20%, full-depth, involute form. The gear receives 30 hp from a pinion directly above it. Compute the torque delivered to the shaft and the tangential and radial forces exerted on the shaft by the gear. Figure P12-1 Shaft carrying a gear and a V-belt drive 0
See Figure P12-1. The shaft rotating...
The accessory drive unit of a large aircraft engine involves an identical pair of 200 full-depth spur gears. The gears have 70 teeth and rotate together at 8000 rpm. The diametral pitch is 12 and the face width 1.0 in. The gears are made of alloy steel, case-hardened to 62RC (680 Bhn). Although the case extends throughout the fillet, it is conservatively decided to use the core hardness of 500 Bhn for calculating fatigue strengths. The tooth profiles are finished...
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is 2 in. The pinion rotates at 1000 rev/min and transmits 50 hp. The shafts are at 90. Determine the components of the gear tooth force and show these on a sketch of the ge
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is...
(1) A pair of meshing spur gears having 20 degree full depth teeth and face widths of 2.5-in, a diametral pitch of 4 and both made of steel having a BHN of 400. The pinion is rotating at 600 pm, has 30 teeth and the velocity ratio is 2/3. Assume uniform power source with moderate shock, less rigid mounting with contact across the full face. Find the maximum horsepower that can be transmitted based on strength using the AGMA method....
See Figure P12-1. The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6. The teeth are of the 20%, full-depth, involute form. The gear receives 30 hp from a pinion directly above it. Compute the torque delivered to the shaft and the tangential and radial forces exerted on the shaft by the gear. Figure P12-1 Shaft carrying a gear and a V-belt drive C D 10.004-10.00 6.00 V-belt sheave Gear...
The figure above shows two spur gears mounted on a shaft at A and C. This shaft gear assembly is supported on two pedestal bearings at D and Brespectively. These bearing supports act as simple supports. Neglect the weight of the shaft and the gears. The force on gear 1 is shown at an angle with respect to the vertical "y" axis and the force on gear 2 (Fc-1000 N) is shown at an angle with respect to the horizontal...
2. Fig.2 shows an epicyclic gear train in which the internal teeth on the gears A and B have the same diametral pitch. Gear A has 88 teeth and gear B has 100 teeth both internally and externally. The sun-wheel C which is keyed to shaft P has 44 teeth and the pinion E keyed to shaft R has 25. There are floating compound planet wheels F, G. The power input to shaft R is 8 kW at 1440 rev/min....
Question is in Metric not imperial
MEA35TA/101/0/2019 Question 9 An uncrowned straight-bevel pinion has 30 teeth, a diametral pitch of 6, and a transmission accuracy number of 6. The driven gear has 60 teeth. Both are made of No. 30 cast iron. The shaft angle is 90 . The face width is 1.25 in, the pinion speed is 900 rev/min, and the normal pressure angle is 20.. The pinion is mounted outboard of its bearings: the bearings of the gear...
Most questions answered within 3 hours.
-
A student performed an experiment using the same setup as the
one used in the lab...
asked 11 minutes ago -
predict the major product of nitration of bromobenzene, followed by
SnCl2 reduction
asked 20 minutes ago -
A standing wave with five antinodes is excited in a string of
length 2.5 m where...
asked 14 minutes ago -
An apnea monitor for adults consists of a flexible coil that
wraps around the chest, When...
asked 14 minutes ago -
Suppose the method of tree ring dating gave the following dates
A.D. for an archaeological excavation...
asked 44 minutes ago -
Network security
1. explain succinctly how a Denial of Service attack may occur
on an implementation...
asked 34 minutes ago -
Name two of the basic guidelines for business dress that women
should follow in cultures other...
asked 35 minutes ago -
How can organizations create value by implementing an advanced
information system solution paired with the appropriate...
asked 37 minutes ago -
You are designing a wastewater treatment system using a
constructed wetland. The inputs will be high...
asked 39 minutes ago -
A 43kg teen grabs onto a rope swing. The length of rope between
the teen and...
asked 48 minutes ago -
In a certain oscillating LC circuit, the total energy
is converted from electrical energy in the...
asked 50 minutes ago -
JAVA - OOP inheritance help please
I have a question,
I have 4 classes.
College, course,...
asked 50 minutes ago