![HomeWork3 Deadline: Tuesday March 31st, 2019 Problem 1: [10 points] Draw the equivalent circuit of separately excited, shunt,](http://img.homeworklib.com/images/35dcb52a-3492-46c3-b0ec-05a7e3512c37.png?x-oss-process=image/resize,w_560)
Homework Answers
Add Answer to:
HomeWork3 Deadline: Tuesday March 31st, 2019 Problem 1: [10 points] Draw the equivalent circuit o...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance Rf of 40 Ω, and an armature resistance Ra of 250 mm2. The field winding has 1500 turns. An adjustable resistance Rad is connected in series to the field winding. Rad is set at 20 Ω, but it can vary from 0 to 80 Ω. The magnetization curve is shown in Figure.1 and it is taken at a speed of 1200 rpm. (Armature reaction...
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an...
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an armature resistance of 0.1 ohm, is delivering 80 % of rated power to the mains at rated voltage when being run at 1000 r.p.m. (revolutions per minute). The field circuit resistance is 220 ohms. The brush contact drop is 0.5 V and rotational (mechanical) losses are 750 W Calculate The induced voltage The electromagnetic torque developed The shaft torque The overall efficiency B) (15...
A 250 V, 10 KW, 1200 rpm dc shunt motor has a full load efficiency of...
A 250 V, 10 KW, 1200 rpm dc shunt motor has a full load efficiency of 80 percent. Its field and armature resistances are 110 ohms and .25 ohm respectively. Calculate the value of the resistance to be inserted in series with the armature and the power lost in the armature circuit to reduce the speed to 80 percent when the load torque is constant regardless of the speed.
A 6 hp, 180 V shunt dc motor draws a full-load current of 30 A from the power supply. The motor h...
A 6 hp, 180 V shunt dc motor draws a full-load current of 30 A from the power supply. The motor has a field (shunt) resistance of 150 Ω. The armature resistance of the motor is 0.1 Ω. When the motor speed is 1800 rpm (this is not the full-load speed), the relationship between the induced voltage
1. A shunt machine, while running as a generator, has an induced voltage of 260 V...
1. A shunt machine, while running as a generator, has an induced voltage of 260 V at 1200 rpm. Its armature and field resistances are 0.2 2 and 110 Q, respectively. If the machine is run as a shunt motor, it takes 4 A at 220 V (i) Draw the schematic diagram of the machine as a generator. (ii) Draw the schematic diagram of the machine as a motor (iii)At a certain load the motor takes 30 A at 220...
T u resistance in a DC is decreased while the motor is driving a ii. A...
T u resistance in a DC is decreased while the motor is driving a ii. A 100-hp, 250-V DC shunt motor with compensating winding has an am 0.04 12 and a variable shunt field resistance R; 92. The magn ompensating winding has an armature resistance of shunt field resistance R, 12. The magnetization curve of this motor is shown in Fig. 1. At no load, the field resistor has been a . At no load, the field resistor has been...
Show all working 1. A 4 pole, 220 V, 10 H.P, d.c. shunt motor is rotating...
Show all working 1. A 4 pole, 220 V, 10 H.P, d.c. shunt motor is rotating at a speed of 320 rpm. Then the developed useful torque is 2. A 4 pole, lap wound d.c. motor drawing an armature current of 20 A has 360 conductors. If the flux per pole is 0.015 Wb then the gross torque developed by the armature of motor is 3. A 220 V, d.c. motor draws an armature current of 20 A. Its armature...
A 250-V shunt-connected DC motor runs at 1500 rpm when it is not connected to any...
A 250-V shunt-connected DC motor runs at 1500 rpm when it is not connected to any external load. When the motor is connected to an external load, it draws a line current of 40A. The motor has an armature resistance of 1 ? and a field circuit resistance of 100 ?. Assume that the rotational loss torque is 2 Nm and is independent of the speed (a) Find the line current of the motor when there is no external load....
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω...
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω and shunt field resistance 100 Ω. The rotational losses are 200 W. On full load the line current is 25 A and the motor runs at 1800 rpm. Determine: (i) the developed mechanical power (ii) the output power (iii) the output torque (iv) the efficiency at full load 2. A 120 V series motor has 0.2 Ω field resistance. On full load, the line...
A 30 hp, 240 V, 1150 rpm de shunt motor operating at rated conditions has an efficiency of 88.5%. The armature circuit resistance and field circuit resistance are 0.096 Ω and 936 Ω respectively. Calc...
A 30 hp, 240 V, 1150 rpm de shunt motor operating at rated conditions has an efficiency of 88.5%. The armature circuit resistance and field circuit resistance are 0.096 Ω and 936 Ω respectively. Calculate the following: (a) the armature current; b) the output torque (c) the mechanical developed power (d) the mechanical developed torque; and, e) the external resistance required in series with the armature to limit the starting torque to 200 % of rated torque. If the load...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance Rf of 40 Ω, and an armature resistance Ra of 250 mm2. The field winding has 1500 turns. An adjustable resistance Rad is connected in series to the field winding. Rad is set at 20 Ω, but it can vary from 0 to 80 Ω. The magnetization curve is shown in Figure.1 and it is taken at a speed of 1200 rpm. (Armature reaction...
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an armature resistance of 0.1 ohm, is delivering 80 % of rated power to the mains at rated voltage when being run at 1000 r.p.m. (revolutions per minute). The field circuit resistance is 220 ohms. The brush contact drop is 0.5 V and rotational (mechanical) losses are 750 W Calculate The induced voltage The electromagnetic torque developed The shaft torque The overall efficiency B) (15...
1. A shunt machine, while running as a generator, has an induced voltage of 260 V at 1200 rpm. Its armature and field resistances are 0.2 2 and 110 Q, respectively. If the machine is run as a shunt motor, it takes 4 A at 220 V (i) Draw the schematic diagram of the machine as a generator. (ii) Draw the schematic diagram of the machine as a motor (iii)At a certain load the motor takes 30 A at 220...
T u resistance in a DC is decreased while the motor is driving a ii. A 100-hp, 250-V DC shunt motor with compensating winding has an am 0.04 12 and a variable shunt field resistance R; 92. The magn ompensating winding has an armature resistance of shunt field resistance R, 12. The magnetization curve of this motor is shown in Fig. 1. At no load, the field resistor has been a . At no load, the field resistor has been...
A 250-V shunt-connected DC motor runs at 1500 rpm when it is not connected to any external load. When the motor is connected to an external load, it draws a line current of 40A. The motor has an armature resistance of 1 ? and a field circuit resistance of 100 ?. Assume that the rotational loss torque is 2 Nm and is independent of the speed (a) Find the line current of the motor when there is no external load....
A 30 hp, 240 V, 1150 rpm de shunt motor operating at rated conditions has an efficiency of 88.5%. The armature circuit resistance and field circuit resistance are 0.096 Ω and 936 Ω respectively. Calculate the following: (a) the armature current; b) the output torque (c) the mechanical developed power (d) the mechanical developed torque; and, e) the external resistance required in series with the armature to limit the starting torque to 200 % of rated torque. If the load...
Most questions answered within 3 hours.
-
Industry: Telecommunications in India
Here, you need to discuss the sources of the growth pattern
and...
asked 1 hour ago -
Hydrobromic acid
dissolves solid iron according to the followiaung reaction:
Fe(s)+2HBr(aq)→
FeBr2(aq)+ H2(g)
Part A. What...
asked 2 hours ago -
Verify the following vector identity in SPHERICAL
COORDINATES.
div(curl(A)) = 0
asked 4 hours ago -
The work function (Φ) for a metal is 7.50×10-19 J.
What is the longest wavelength (nm)...
asked 5 hours ago -
1. Would the following procedural changes cause the
calculated mass percent Ni2+ ion in Ni(NH3)nCl2 to...
asked 6 hours ago -
1. Why does the voltage of the capacitor vary with frequency?
where does this missing voltage...
asked 8 hours ago -
p p please write each step out clearly
3. A manager of a company is considering...
asked 7 hours ago -
On October 1, Ebony Ernst organized Ernst Consulting; on October
3, the owner contributed $83,540 in...
asked 8 hours ago -
A.)As an electron moves through a region of space, its speed
decreases from 9.60 × 106...
asked 8 hours ago -
In java with the netbeans program do:
Through object programming
Create a class "ContadorP", which is...
asked 8 hours ago -
Pattern Corporation acquired all of Science
Company's outstanding stock on January 1, 2016 for $600,000 cash....
asked 8 hours ago -
Here are all accounts Tyler Co. maintains.
Tax expenses $4,750
Common stocks $48,840
SG&A expenses $2,500...
asked 8 hours ago