Please refer the following images for the solution.
A standard oriice with diameter 25 mm is installed in a horizontal pipe having an inside diameter...
In a laboratory experiment, an orifice of diameter 15 mm is installed in a 25 mm diameter pipe and two pressure tappings, one before and one after the orifice, are connected to a vertical mercury manometer. The discharge is obtained by measuring the rise of water level in a 30 cm x 30 cm square tank collecting the outflow from the pipe. For a particular experiment, the difference in manometer readings was 130 mm of H level was 120 mm...
Prob5 A venture meter having a throat diameter of 150 mm is installed in a horizontal 300-mm-diameter water main, as shown in figure below. The discharge coefficient, C = 0.982. Determine the difference in level of the mercury columns of differential manometer attached to the Venturi meter if discharge is 0.142 m/s. Flog Mercury
Question 3 (40 marks) (a) Air enters a horizontal nozzle with a velocity of 1 m/s, a pressure of 2 bar and a temperature of 350 K. At exit from nozzle, the air temperature is 450 K. The combined rate of specific heat transfers, and specific work transfers, w to the air as it passes through the nozzle is 150 kJ/kg. Assume that the air flow is steady and air can be treated as perfect gas with = 1005 J/(kg.K)....