Homework Answers
Add Answer to:
Refrigeration Question 1 a) A refrigerant R134a refrigerator is to maintain the refrigerated spac...
1) A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated...
1) A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 16 °C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and -34°C and the compressor is estimated to gain a net heat of...
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at by The refrigerant enters the condenser at compressor consumes 3.3 kW of power, dete...
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at by The refrigerant enters the condenser at compressor consumes 3.3 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (e) the COP, and (d) the g waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. 1.2 MPa and 50°C and leaves at the same...
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space...
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at −25°C by rejecting waste heat to cooling water that enters the condenser at 20°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the compressor consumes 3.3 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration...
5. A commercial refrigerator uses 134a refrigerant to keep the space refrigerated at −30 ° C...
5. A commercial refrigerator uses 134a refrigerant to keep the space refrigerated at −30 ° C by rejecting its waste heat into cooling water entering the condenser at 101,325 kPa, at the rate of 0.25 kg / s. The refrigerant is fed to the compressor at -25 ° C and 100 kPa. Use a software and determine the quality of the refrigerant at the inlet of the evaporator and the COP of the refrigerator using the conditions shown in the...
(12 points) A refrigerator using refrigerant-134a as the working fluid operates on the vapor compression cycle....
(12 points) A refrigerator using refrigerant-134a as the working fluid operates on the vapor compression cycle. The cycle operates between 200 kPa and 1.2 MPa. The refrigerant flows through the cycle at a rate of 0.019 kg/s. The (actual) refrigerator has a compressor with an isentropic efficiency of 85%. The refrigerant enters the compressor slightly superheated by 56 C hint add this to the saturation temperature). The refrigerant leaves the condenser slightly subcooled by 1.9°C. What is the rate of...
Problem #4 (20 points) A commercial refrigerator with refrigerant-134a as the working fluid is used to...
Problem #4 (20 points) A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and-34°Cand the compressor is estimated to gain a net heat of...
Tt (12 points) A refrigerator using refrigerant-134a as the working fluid operates on the vapor compression...
Tt
(12 points) A refrigerator using refrigerant-134a as the working fluid operates on the vapor compression cycle. The cycle operates between 200 kPa and 1.2 MPa. The refrigerant flows through the cycle at a rate of 0.015 kg/s. The actual) refrigerator has a compressor with an isentropic efficiency of 82%. The refrigerant enters the compressor slightly superheated by 6.2°C (hint: add this to the saturation temperature). The refrigerant leaves the condenser slightly subcooled by 1.8°C. What is the rate of...
A refrigeration system with a flash chamber operates with R134a between the pressure limits of 1.0 and 0.1 MPa. Th...
A refrigeration system with a flash chamber operates with R134a between the pressure limits of 1.0 and 0.1 MPa. The refrigerant leaves the condenser as saturated liquid and is throttled to a flash chamber operating at 0.5 MPa. The refrigerant leaving the low-pressure compressor at 0.5 MPa is also routed to the flash chamber. The vapor in the flash chamber is then compressed to the condenser pressure by the high-pressure compressor, and the liquidis throttled to the evaporator pressure. Assume...
a refrigerator uses refrigerant 134a as a working fluid and operates on the vapour -compression refrigiration...
a refrigerator uses refrigerant 134a as a working fluid and operates on the vapour -compression refrigiration cycle.the evaporator is maintained at -100C and the refrigirant is a dry saturated vapour as it leaves the evaporator. the compressor has an efficiency of 80%.the conditions at the outlet of the condensor are 300C and 9 bar. 1-if the mass flow rate of the refrigerant is 0,08kg/s workout the rate of heat removal from the refrigerant space.the power input to the cpmpressor and...
Problem (25 points) A typical R134a dry vapor compression refrigerator has a COP of about 1.3 when operating betwee...
Problem (25 points) A typical R134a dry vapor compression refrigerator has a COP of about 1.3 when operating between 15° C and 30° C. For a refrigerator rated at 0.1 tons of refrigeration. Determine the power required and the mass flow rate of R134a. Assume that the refrigerant is saturated liquid leaving the condenser.
Problem (25 points) A typical R134a dry vapor compression refrigerator has a COP of about 1.3 when operating between 15° C and 30° C. For a...
1) A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 16 °C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and -34°C and the compressor is estimated to gain a net heat of...
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at by The refrigerant enters the condenser at compressor consumes 3.3 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (e) the COP, and (d) the g waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. 1.2 MPa and 50°C and leaves at the same...
5. A commercial refrigerator uses 134a refrigerant to keep the space refrigerated at −30 ° C by rejecting its waste heat into cooling water entering the condenser at 101,325 kPa, at the rate of 0.25 kg / s. The refrigerant is fed to the compressor at -25 ° C and 100 kPa. Use a software and determine the quality of the refrigerant at the inlet of the evaporator and the COP of the refrigerator using the conditions shown in the...
(12 points) A refrigerator using refrigerant-134a as the working fluid operates on the vapor compression cycle. The cycle operates between 200 kPa and 1.2 MPa. The refrigerant flows through the cycle at a rate of 0.019 kg/s. The (actual) refrigerator has a compressor with an isentropic efficiency of 85%. The refrigerant enters the compressor slightly superheated by 56 C hint add this to the saturation temperature). The refrigerant leaves the condenser slightly subcooled by 1.9°C. What is the rate of...
Problem #4 (20 points) A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and-34°Cand the compressor is estimated to gain a net heat of...
Tt
(12 points) A refrigerator using refrigerant-134a as the working fluid operates on the vapor compression cycle. The cycle operates between 200 kPa and 1.2 MPa. The refrigerant flows through the cycle at a rate of 0.015 kg/s. The actual) refrigerator has a compressor with an isentropic efficiency of 82%. The refrigerant enters the compressor slightly superheated by 6.2°C (hint: add this to the saturation temperature). The refrigerant leaves the condenser slightly subcooled by 1.8°C. What is the rate of...
A refrigeration system with a flash chamber operates with R134a between the pressure limits of 1.0 and 0.1 MPa. The refrigerant leaves the condenser as saturated liquid and is throttled to a flash chamber operating at 0.5 MPa. The refrigerant leaving the low-pressure compressor at 0.5 MPa is also routed to the flash chamber. The vapor in the flash chamber is then compressed to the condenser pressure by the high-pressure compressor, and the liquidis throttled to the evaporator pressure. Assume...
Problem (25 points) A typical R134a dry vapor compression refrigerator has a COP of about 1.3 when operating between 15° C and 30° C. For a refrigerator rated at 0.1 tons of refrigeration. Determine the power required and the mass flow rate of R134a. Assume that the refrigerant is saturated liquid leaving the condenser.
Problem (25 points) A typical R134a dry vapor compression refrigerator has a COP of about 1.3 when operating between 15° C and 30° C. For a...
Most questions answered within 3 hours.
-
1. Are all good samples random?
2. Magazines often report surveys giving statistics such as “63%...
asked 2 minutes ago -
Buying your in-laws a gift because it’s expected is
due to the ____________ motive of gift-giving....
asked 10 minutes ago -
Discuss the pros and cons of collaborative software such
as SameTime. Does it increase productivity? What...
asked 7 minutes ago -
A large cable company reports the following.
80% of its customers subscribe to its cable TV...
asked 9 minutes ago -
Calculate the expected value, the variance, and the standard
deviation of the given random variable X....
asked 53 minutes ago -
A hospital performs 100 surgeries per week. The probability that
complications after surgery occur is 10%....
asked 1 hour ago -
1 point) Given the significance level α=0.01 find the following:
(a) left-tailed z value z= (b)...
asked 51 minutes ago -
Assuming you are the head of the software development unit at
Cyber.Soft, explain and justify why...
asked 17 minutes ago -
Magnesium and nitrogen react in a combination reaction to
produce magnesium nitride. 3 Mg + N2...
asked 25 minutes ago -
Two electrons are initially at rest separated by a distance of
2nm. At time t=0, they...
asked 23 minutes ago -
A martial artist is practicing breaking 5 boards. He is able to
break aboard with probability...
asked 31 minutes ago -
The rate constant of a first-order reaction is 2.95 × 10−4 s−1
at 350.° C. If...
asked 33 minutes ago