Homework Answers
Add Answer to:
Q2) an axial compressor takes air axially (no swirl) from ambient at a total temperature of 27° a...
A high-pressure axial compressor for a jet engine rotates at 15,000 rpm with an overall stagnation...
A high-pressure axial compressor for a jet engine rotates at 15,000 rpm with an overall stagnation pressure ratio of 8.5. The mass flow rate of air through the compressor is 16 kg/s and the stagnation conditions at inlet are 200 kPa and 450 K. The polytropic efficiency is 91%. a. If the mean radius is 0.24 m and this is constant throughout the compressor, calculate the total-to-total isentropic efficiency of the compressor and show that, for the stage loading to...
A one stage axial air compressor consists of a rotor and a stator, it has a...
A one stage axial air compressor consists of a rotor and a stator, it has a mean diameter of Im for the rotor and a rotational speed of 7645 RPM. Furthermore: Mass flow rate is 50 kg/s .Inlet static temperature and pressure of Ti 276 K and Pi 85 kPa. .Inlet stagnation temperature and pressure of Toi 290 K and Poi 101.3 kPa. .Inlet absolute velocity C1 166.5 m/s Rotor exit static density (p2) equals to 1.3kg/m3 Axial component of...
mass flow rate 15 kh/s DATA: Mass Flow Rate 15 kg/s Inlet Stagnation Pressure = 1013...
mass flow rate 15 kh/s
DATA: Mass Flow Rate 15 kg/s Inlet Stagnation Pressure = 1013 kPa Inlet Stagnation Temperature 1200 K Mean Blade Diameter 25 cm Rotor Speed 26,500 rpm Fou usbine Axial Velocity- 180 m/s inlet to Rotor Angle, α= 700 Exit Rotor Angle as 0 Assuming variable specific heats and the axial velocity remains constant; (a) Construct the velocity diagrams for the stage (b) Calculate work, Aw (c) The power developed based on the mean blade diameter,...
An axial flow compressor stage is downstream of an IGV that turns the flow 15° in...
An axial flow compressor stage is downstream of an IGV that turns the flow 15° in the direction of the rotor rotation, as shown in figure 1. The axial velocity component remains constant throughout the stage at Cz = 150 M/S. The rotor rotational speed w = 3000 rpm and the pitchline radius is rm=0.5 m. The rotor relative exit flow angle is B2=-15°. The static temperature and pressure of air upstream of the rotor are T1 = 20°C and...
TQi The rotor and stator rows arrangement of an axial compressor stage and their general velocity...
TQi The rotor and stator rows arrangement of an axial compressor stage and their general velocity diagrams are shown in Figure 1.1 (a) and (b), respectively. The compressor rotor blade speed is set at 100 m's and the inlet absolute flow velocity for rotor (C1) and stator (C:) are given in APPENDIX A (Each student will have different data) Consider normal stage condition and constant axial flow throughout the stage at 50 m's 01 C 0 SS 93 ROTOR t=100...
C) Axial-flow compressor Answer 3) Specifie speed (0.) for the compressor compressor should selected? application is 0.9. Which of the following type of 52 th Reciprocating compressor B) none of t...
C) Axial-flow compressor Answer 3) Specifie speed (0.) for the compressor compressor should selected? application is 0.9. Which of the following type of 52 th Reciprocating compressor B) none of these A) Centrifug al compressor 1,) compressor D) Centrifugal fan 6) &7) The compressor is tested at sea level on a stationary atmospheric temperature and pressure is design operating point, the mass flow rate through the compr rotational speed is 7000 rpm. Determine the flow compressor is operating at the...
ta Vew Wiadcw Helpr Home Tocls 101 2019.0.Cot QUESTION 9 In a jet engine rotor the high pressure axial compressor ro...
ta Vew Wiadcw Helpr Home Tocls 101 2019.0.Cot QUESTION 9 In a jet engine rotor the high pressure axial compressor rotates at a speed of 15000 rpm. The overall stagnation pressure ratio due to compression is 10.1, it was recorded that the air flows at a rate of 16 kg/s. The stagnation properties at the inlet are 215 kPa and 460K. The poly-tropic efficiency of the compressor is 90%. Assume the mean radius of the compressor is constant and equal...
Consider a 5-stage axial compressor. From the stator outlet of one stage, to the rotor inlet...
Consider a 5-stage axial compressor. From the stator outlet of one stage, to the rotor inlet of the next stage. Maintaining continuity, what changes and what is generally assumed constant? (total pressure and temperature, static pressure and temperature, density, absolute flow angle (alpha), relative flow angle (beta), axial velocity, etc
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and...
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. Determine the compressor work per unit mass for (a) isentropic compression with k 1.4, (b) a compressor with 85% isentropic efficiency, (c) two-stage compression (100 kPa to 300 kPa, and 300 kPa to 900 kPa) with intercooling with an isentropic efficiency of 85% for both compressors. (50 points) 2.
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and...
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. if the volume flow rate = 1 m/sec Determine: the compressor power (kW) for isentropic compression with k = 1.4 Choose... the compressor power (kW) for polytropic compression with n = 1.3 Choose.. the compressor power (kW) for ideal two stage compression with intercooling with a polytropic exponent of 1.3 Choose... the compressor power (kW)...
A one stage axial air compressor consists of a rotor and a stator, it has a mean diameter of Im for the rotor and a rotational speed of 7645 RPM. Furthermore: Mass flow rate is 50 kg/s .Inlet static temperature and pressure of Ti 276 K and Pi 85 kPa. .Inlet stagnation temperature and pressure of Toi 290 K and Poi 101.3 kPa. .Inlet absolute velocity C1 166.5 m/s Rotor exit static density (p2) equals to 1.3kg/m3 Axial component of...
mass flow rate 15 kh/s
DATA: Mass Flow Rate 15 kg/s Inlet Stagnation Pressure = 1013 kPa Inlet Stagnation Temperature 1200 K Mean Blade Diameter 25 cm Rotor Speed 26,500 rpm Fou usbine Axial Velocity- 180 m/s inlet to Rotor Angle, α= 700 Exit Rotor Angle as 0 Assuming variable specific heats and the axial velocity remains constant; (a) Construct the velocity diagrams for the stage (b) Calculate work, Aw (c) The power developed based on the mean blade diameter,...
An axial flow compressor stage is downstream of an IGV that turns the flow 15° in the direction of the rotor rotation, as shown in figure 1. The axial velocity component remains constant throughout the stage at Cz = 150 M/S. The rotor rotational speed w = 3000 rpm and the pitchline radius is rm=0.5 m. The rotor relative exit flow angle is B2=-15°. The static temperature and pressure of air upstream of the rotor are T1 = 20°C and...
TQi The rotor and stator rows arrangement of an axial compressor stage and their general velocity diagrams are shown in Figure 1.1 (a) and (b), respectively. The compressor rotor blade speed is set at 100 m's and the inlet absolute flow velocity for rotor (C1) and stator (C:) are given in APPENDIX A (Each student will have different data) Consider normal stage condition and constant axial flow throughout the stage at 50 m's 01 C 0 SS 93 ROTOR t=100...
C) Axial-flow compressor Answer 3) Specifie speed (0.) for the compressor compressor should selected? application is 0.9. Which of the following type of 52 th Reciprocating compressor B) none of these A) Centrifug al compressor 1,) compressor D) Centrifugal fan 6) &7) The compressor is tested at sea level on a stationary atmospheric temperature and pressure is design operating point, the mass flow rate through the compr rotational speed is 7000 rpm. Determine the flow compressor is operating at the...
ta Vew Wiadcw Helpr Home Tocls 101 2019.0.Cot QUESTION 9 In a jet engine rotor the high pressure axial compressor rotates at a speed of 15000 rpm. The overall stagnation pressure ratio due to compression is 10.1, it was recorded that the air flows at a rate of 16 kg/s. The stagnation properties at the inlet are 215 kPa and 460K. The poly-tropic efficiency of the compressor is 90%. Assume the mean radius of the compressor is constant and equal...
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. Determine the compressor work per unit mass for (a) isentropic compression with k 1.4, (b) a compressor with 85% isentropic efficiency, (c) two-stage compression (100 kPa to 300 kPa, and 300 kPa to 900 kPa) with intercooling with an isentropic efficiency of 85% for both compressors. (50 points) 2.
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. if the volume flow rate = 1 m/sec Determine: the compressor power (kW) for isentropic compression with k = 1.4 Choose... the compressor power (kW) for polytropic compression with n = 1.3 Choose.. the compressor power (kW) for ideal two stage compression with intercooling with a polytropic exponent of 1.3 Choose... the compressor power (kW)...
Most questions answered within 3 hours.
-
Although Epicurus advocates pursuing pleasure for the
good life, discuss a few reasons why he does...
asked 1 minute ago -
Problem 1: Present entries to record the selected transactions
described below:
(a)
Issued $2,790,000 of 5-year,...
asked 7 minutes ago -
Using technology to support HR activities increases:
a.
the efficiency of the administrative HR functions.
b....
asked 8 minutes ago -
1. List the features used to classify leaf
types.
2. List some characteristics that are shared...
asked 13 minutes ago -
The three elements of Value Proposition, Key Customers, and
Capabilities operate within an environment. Which of...
asked 15 minutes ago -
Katelynn, a physician, earns $200,000 from her medical practice
in the current year. She receives $45,000...
asked 23 minutes ago -
Each row of the table below describes an aqueous solution at
25°C
.
The second column...
asked 27 minutes ago -
A horizontal wire is at y = 0. Current travels in the +x
direction. The magnetic...
asked 27 minutes ago -
Let X be a continuous random variable whose PDF is Let X be a
continuous random...
asked 49 minutes ago -
Martinez Company’s relevant range of production is 7,500 units
to 12,500 units. When it produces and...
asked 47 minutes ago -
A football with a mass of 1.2 kg is kicked from ground level to
a height...
asked 52 minutes ago -
Remember: Changes in supply determinants shift supply, and
changes in demand determinants shift demand. We say...
asked 51 minutes ago