48. The 138-kV3ф line described in Problem 4.1 is 150 mi long and is delivering 15 MW at 132 kV a...
A375-kV 60Hz three-phase 500 miles long transmission line with distributed line parameters per mi of r 0.1 Ohm, L-1.365 mH, c 0.00842 uF and g 0 delivers 200 MW to the load at 350 kV at 0.85 power factor lagging. Find the following: 2. 50 pts. a) Characteristic impedance, attenuation constant and phase constant. b) sinhyL c) Transmission parameter A. d) Transmission efficiency if the sending end voltage and current are is 238.81419.07 kV/phase and 306.07228.783 A respectively using long-line...
Given a 3-transmission line with a series impedance z 0.17+ jo.79 2/mile, and a shunt admittance y j2.10*mile The line is 150 mile long, and delivers to the load (receiving-end) 15 MW at 132 kV, at a power factor PF1. Assume medium length line, and calculate the power angle 012 between the sending-end voltage and the receiving-end voltage.
power system A single-circuit 60-Hz high voltage power transmission line is 370 km (230 mi) long. The conductors are Rook with flat horizontal configuration and 7.25 ms=(23.8 ft.) conductor spacing. The load on the line is 125 MW at 100% power factor. Use attached Tables A3 to A3to determine; The sending end voltage Vs The sending end current Is The sending end power Ps The percentage voltage regulation The transmission efficiency Given that Ds for the Rook conductor is 0.0327...
A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05j0.45 2 per km and a per phase shunt admittance ofy = j3.4 x 10-6 siemens per km. The line is 80 km long. Using the nominal r model, determine (a) The transmission line ABCD constants. Find the sending end voltage and current, voltage regulation, the sending end power and the transmission efficiency when the line delivers (b) 200 MVA, 0.8 lagging power factor at 220...
Show the solution for the following problem 1. A short, 230 kV transmission line has an impedance of 5 cis 78 ohms. The load at the receiving end is 100 MW at 230 kV, 85% lagging power factor. What is the voltage at the sending end? a. 235.43 kV b. 226.3 kV c. 231.78 kV d. 238.21 kV 2. A 66 kv medium length transmission line delivers a load of 10 MW at 66 kv and 80% lagging P.F. the...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase series impedance of z-0.05 +j0.45 Ω per km, and a per phase shunt admittance of y 3.4x10-6 Siemens per km. The line delivers (at the receiving end) 200 MVA, 0.8 lagging power factor at 220 kV. Now consider two cases: A- Assume that shunt parameters of the transmission line are ignored (i.e. even if this is a medium length transmission line, under...
A 3-phase 138-kv transmission line is connected to a 49 MW load at .85 lagging power factor. The line constants of the 52-mile long line are Z = 95 L 78 degree ohm and Y=.001 L90 degree S. Using the nominal T Circuit representation, calculate the A, B, C, and D constants of the line Sending-end voltage Sending-end current Sending-end power factor Efficiency of transmission
A three-phase transmission line is 200 km long. lt has a total series impedance of 25+j110)Ω Per Phase and a total shunt admittance ofj5x 10 Ω. It delivers 180 MW at 275 kV and 0.8 power factor lagging to a load connected at the receiving end. Using the medium π model of the line, determine the voltage, current, real power, reactive power and power factor at the sending end of the line.
A 50-Hz, three-phase transmission line is 300 km long. It has a total series impedance of 23 + j75 Ohms and a shunt admittance of j500 µS. It delivers 50 MW at 220 kV, with a power factor of 0.88 lagging. Find the voltage at the sending end using: 1) the short line approximation. 2) the medium-length approximation. 3) the long line equation. How accurate are the short- and medium-length approximations for this case?
QUESTIONS 1- A 69-kV, three-phase transmission line is 20 km long. The line has a per phase series impedance of 0,120 + 10,4325 per km. Detemine the sending end voltage, voltage regulation, the sending end power, and the transmission efficiency when the line delivers (a) 60 MVA, 0.8 lagging power factor at 60 kV. (b) 110 MW, unity power factor at 60 kV