Water at 10 degrees Celsius and a velocity of 2.5 m/s is flowing along a 4.5 m long flat plate at a uniform temperature of 40 degrees Celsius. If the plate is 1.5 m wide, determine:
a) the distance from the leading edge of the plate where the flow becomes turbulent,
b) the heat transfer rate between the plate and the flowing water,
c) the fraction of the force exerted by the water on the first half of the plate from the leading edge, as a fraction of the force over the total length of the plate.
Use the following properties of water: density = 997 kg/m^3, dynamic viscosity = 0.89 * 10^-3 kg/m-s, specific heat at constant pressure = 4.181 kJ/kg-K, thermal conductivity = 0.61 W/m-K
Water at 10 degrees Celsius and a velocity of 2.5 m/s is flowing along a 4.5 m long flat plate at a uniform temperature of 40 degrees Celsius. If the plate is 1.5 m wide, determine: a) the distance fr...
Water at 25°C is flowing over a long flat plate with a velocity of 8 m/s. The density and dynamic viscosity of water at 25°C are respectively, 997 kg/m3 and 0.891 x 10- 3 kg/m s. The distance from the leading edge of the plate where the flow becomes turbulent is: 30 mm 78 mm 47 mm 45 mm 56 mm
Required information Air at 25°C and 1 atm is flowing over a long flat plate with a velocity of 7 m/s. The density and kinematic viscosity of air at 1 atm and 25°C are p= 1.184 kg/m3 and V = 1.562x10-5 m2/s. Calculate the distance from the leading edge of the plate where the flow becomes turbulent. The distance from the leading edge of the plate is m. Required information Air at 25°C and 1 atm is flowing over a...
Air is flowing over a long flat plate with a velocity of 3 m/s. The density is 1.127 kg/mº, and the dynamic viscosity is 1.918-10-kg/m s. The hydrodynamic boundary layer thickness at a distance 0.3 m from the leading edge is: 0 6.41 mm 52,883 mm 5.85 mm 3.22 mm None of the above
2. (25 pts) Engine oil flows with a velocity of 6 m/s over a flat plate having 1m length and 1 m width. The oil has a free stream temperature To= 80 °C and the plate surface temperature is maintained at Ts = 0 °C. a. Determine whether the flow over the plate transitions to turbulent regime. b. Calculate the average friction factor and the average heat transfer coefficient for the plate by using the appropriate correlations. c. Calculate the...
8) Air flows over a flat plate at a velocity of 20 m/s and a temperature of 20C. The surface temperature of the plate is 134C, and the length of the plate in the direction of flow is 1.5 m. Properties of air may be taken as A-0.030 W/m-C, Pr-0.700, and a/p 2.092E-5 m/s (5% ) What is the location from the leading edge, X, where the flow becomes turbulent Re (20)15 a l Ve30s T20 T LaLS 523 m...
A thin, flat plate of 0.6 m square is immersed in a parallel stream of air at atmospheric pressure and 15 ºC flowing at a velocity of 6 m/s. Neglect edge effects. a) Determine the drag force exerted on the plate. b) Determine the boundary layer thickness and the local drag coefficient at a distance 0.3 m from the leading edge.
4. (25 pts) Water is flowing inside a thin wall, smooth pipe of diameter 0.05 m at a mass flowrate of 0.3 kg/s. The water enters the pipe at a mean temperature Tm,i= 80 °C and exits at Tm,o= 80 °C while the pipe surface temperature is maintained at Ts= 20 °C along its entire length. a. Is the flow turbulent or laminar? b. Calculate the average convection heat transfer coefficient inside the tube. c. Calculate the length of the...
Consider liquid water flowing over a flat plate of length L = 1 m. The water has the following properties: ρ-1000 kg/m3, Cp-4000 J/kgK. 10 3 kg/ ms, k 0.6 W/m . C μ Midway through the plate at x = 0.5 m, you measure a heat flux to the surface of: 05 m 3181 W/m2 You also measure an average heat flux to the surface over the length of the plate of: "4500 W/m2 Knowing the latter, and knowing...