A force sensor has as its output a change in resistance. The sensor forms one leg (Ri) of a basic Wheatstone bridge. The sensor resistance with no force load is 200 2, and its static sensitivity is...
2- A force sensor has as its output a change in resistance. The sensor forms one leg (RI) of a basic Wheatstone bridge. The sensor resistance with no force load is 600 ohms and its static sensitivity is 0.6 ohms/Newton. Each arm of the bridge is initially 600 ohms. All resistors are 14 W. a- Determine the bridge output for an applied load of 300N with an input voltage of 12 volts. - Determine the current flow and power consumption...
Quarter Bridge configuration on Wheatstone Bridge has only one sensor. If with its configuration voltage is given 100 Volt, R1 = 80 Ω R2 = 80 Ω R3 = 480 Ω With R1 and R3 are on the upper part of Wheatstone Bridge, R2 and R4 are on the lower part of Wheatstone Bridge, determine: a) Schematic of Wheatstone Bridge, strain gauge sensor, and Op-Amp for measuring a strain b) R4 so the voltage of Wheatstone is balanced c) Using...
A force sensor with the static sensitivity 2.5 Ohms/N generates a change in resistance on its output. This sensor is placed in one arm of the deflection bridge with an input voltage of 9 V in order to measure this resistance change. With no force applied, the transducer’s resistance is 200 Ohms, and all resistances in the bridge’s arms are equal. (a) Draw the schematic diagram of the deflection bridge: (b) Calculate the output voltage of the bridge for forces...
7.13 A resistive element of a force cell forms one leg of a Wheatstion bridge. If the no-load resistance is 500Ω and the sensitivity of the cell is 0.5 Ω/M, what will be the bridge outputs for applied loads of 100, 200, and 350 N if the bridge excitation is 10 V and each arm of the bridge is initially 500Ω?