A 1500-kVA, 6.6 kV, 50 Hz, 6-pole, three-phase, star-connected synchronous generator has a resistance 0.5Q/phase and a...
A four pole, Y-connected synchronous generator rated at 200 kVA, 4.62 kV, 0.82 lagging, and 50 Hz has an armature resistance of 0.97 ohms, a synchronous reactance of 8.7 ohms, core loss of 12.3 kW, and friction+windage loss of 13.9 kW. a. find the mechanical speed of the shaft. b. find the rated current, expressing the answer in polar form. c. compute the internally-generated voltage, expressing the answer in polar form. d. find the input power without neglecting the armature...
A 100-MVA 12.5-KV 0.85-PF lagging 50-Hz two-pole Y-connected synchronous generator has a synchronous reactance of 1.7 Q and a negligible armature resistance. I) What is the magnitude of the internal generated voltage at rated conditions? 2) What is its torque angle at these conditions? 3) What is its voltage regulation? 4) Ignoring the losses in this generator, what torque must be applied to its shaft by the prime mover at full load? 5) What is the maximum power the generator...
A 100 k VA, 1100 V, three-phase, 6-pole, Y-connected, 50 Hz synchronous machine has synchronousreactance of 6 92 per-phase and negligible armature resistance. Its core losses are 7 k W and itsfriction and windage losses are 8 kW. The speed droop is 2.5%.Initially the machine is operated alone as a generator and the field current is adjusted such that theno-load voltage equals the rated voltage.a) If the generator is supplying a line current of $2.5 A at 0.85 PF lagging....
Question 4 (10 marks) A) A 10-kVA, 415-V, three phase, Y -connected synchronous generator has a winding resistance of 0.3 Q and a synchronous reactance of 0.6 on a per phase basis. Determine its voltage regulation at full load when the power factor is (a) 75% lagging and (b) 75% leading. B) (10 marks) A 220-V, Y-connected, three-phase, synchronous motor has a synchronous reactance of 4 O/phase and negligible armature winding resistance. At a certain load the motor takes 7.5...
3 A 11-KV, has a full-load quadrature-axil IV. three-phase, 20-pole, star-connected, salient-pole synchronous alternator full-load current of 1000 A The resistance of the rotor is 1,2 phase The rature-axis synchronous reactance per phase is 4.8 and the direct-axis nchronous reactance per phase is 3, 62 Determine for a lagging power factor of 0,8 a) the load angle, b) the developed power, c) the reluctance torque, and d) the voltage regulation СНАР 245 MM401EE
A three-phase, delta-connected, two-pole, synchronous generator is connected to a 60 Hz, 13.5 kV (line-to-line), system. The generator is delivering its rated output power, under which conditions pfload = 0.8 lagging and |SI = 20 MVA. The generator per-phase model parameters at rated load are. RA = 0.5 2 Xss = 522 9. What is the generator's line-to-line voltage regulation? Is the voltage regulation positive or negative? 10. If the field current is held at the rated load value, but...
A three-phase, Y-connected, 6.9-kV, 8-pole, 60-Hz, synchronous motor has a synchronous impedance of 0.01+j6 Ω/phase. The motor is energized at its rated voltage and frequency, and draws a line current of 100 A. The motor rotates a load, while operating at a lagging power factor of 0.9. Calculate the torque developed by the motor: (a) considering the armature resistance (b) neglecting the armature resistance
A 3-phase, 7 kVA, 400 V, 2-pole, star-connected synchronous machine has negligible armature resistance and Xs-60/phase at rated terminal voltage The machine first runs as a generator in parallel with 3-phase, 400 V, 50 Hz power supply 111 Determine the generated voltage and torque angle of the machine operating as a generator, delivering rated kVA at 0 9 pf lagging Draw and label the corresponding phasor diagram for this condition 1 12 If the field excitation is increased by 18%...
A three-phase, 5 kVA, 208 V, four-pole, 60 Hz, wye-connected synchronous machine has negligible stator winding resistance and a synchronous reactance of 8 Wper phase. It is operated in parallel with a three-phase, 208 V, 60 Hz power supply.Determine the excitation voltage and the power angle when the machine is delivering rated kVA at 0.8 pf lagging. Draw the phasor diagram
QUESTION 4 A three-phase Y-connected, 500 kVA, 3.2 kV, 0.85 PF-lagging, six-pole, 60 Hz synchronous generator has a synchronous reactance of 15 ohm and an armature resistance of 0.8 ohm. What are the electrical losses in this generator at the rated conditions? Attach File Browse My Computer Browse Content Collection QUESTION 5 If phase current of a Delta-connected three-phase system is equal to 1pu, then the line current of the same system is equal to 3 pu. Click Save and...