Please help ,,,,, water resources Determine the cross-section of the greatest hydraulic efficiency for a trapezoidal...
Determine the cross section of the greatest hydraulic efficiency for a trapezoidal channel with side slope of 1 vertical to 2 horizontal if the design discharge is 250 m3/s. The channel slope is 0.001 and Manning’s roughness factor is 0.020.
Determine the cross-section of the greatest hydraulic efficiency for a trapezoidal channel with side slope of 1 vertical to 2 horizontal if the design discharge is 10 m3/s. The channel slope is 0.001 and Manning’s roughness factor is 0.020.
Question 6 A concrete-lined trapezoidal channel with uniform flow has a normal depth of 1.5 m. The base width is 4 m and the side slopes are equal at 1 vertical to 2 horizontal. Mannin‘s n-0015. The bed slope 0.001 Compute the mean velocity and discharge. If the above channel were to be designed for flooding, it may have a section like in Figure below 8 m 8 m 4 m When the flow goes over the top of the...
A 2.44 wide channel with a bed slope of 0.0004 has a depth of flow of 0.61 m. (a) Determine the discharge of the channel. The manning coefficient is 0.015. (b) Determine the normal depth if the channel has a flow rate of 2.85 m3/s. (c) Determine the cross section of greatest hydraulic efficiency for a trapezoidal channel if the design discharge is 10 m3/s, the channel slope is 0.0052 and manning’s n = 0.025.
Q2) A canal of trapezoidal section has bed width of 8 m and bed slope of 1 in 4000. If the depth of flow is 2.4 m and side slopes of the chamel are 1 horizontal to 3 vertical, determine the average flow velocity and the discharge carried by the channel. Also compute the average shear stress at the channel boundary. Take value of Chezy's constant = 55. Q3) 6.11. A power canal of trapezoidal section has to be excavated...
(b) The cross-section of a flow in a straight reach of river during a flood is shown in Figure 1. The main channel has a Manning's roughness of 0.022 whereas the flood banks are grassed and have a Manning's roughness of 0.035. The longitudinal slope of the channel So is 0.0002 n 0.035 1) 1.5 m 3 m 4 m 3 m n 0.022 6 m Figure 1 Using the Horton Equation for composite roughness, determine (i) The equivalent Manning's...
Design a concrete trapezoidal channel with best hydraulic cross-section that can handle the flow from the development above. The slope of the channel is 0.05. Describe the flow condition in the channel. 3. art ii-open books and notes (20 points each - use NRCS methods to solve these problems) A proposed 40 ha development in Jackson, Mississippi, includes 10 ha parking lot, 10 ha buildings, and the rest is grass area which includes 1 ha detention pond. The runoff from...
A concrete-lined (smooth) trapezoidal channel with a bottom width of 10 ft and side slope 2 horizontal to 1 vertical has a slope 0,002 and is designed for a discharge of 160 cts. Determine the water depth in the channel,
#4 [5 points] A trapezoidal channel of bottom width 25 ft and side slope 1:2.5 carries a discharge of 450 cfs with a normal depth of 3.5 ft. The elevations at the beginning and end of the channel are 685 and 650 ft., respectively. Determine the length of the channel if n = 0.02. #5 [5 points] Water is flowing at a rate of 4.5 m3/s in a trapezoidal channel whose bottom width is 2.4 m and side slopes are...
Problem 1. For the trapezoidal channel cross section shown below, find the following geometric quantities in terms of bottom width b, flow depth y, and side slope m. Provide the appropriate dimensions for each tem using the L-T-F (Length-Time-Force) system. For example, [b] L (a) Flow area, A (b) Wetted perimeter, P (c) Hydraulic radius, R (d) Top water surface width, T A (e) Hydraulic depth, D= T Problem 2. Write a function in Matlab that calculates each of the...