my dear friend solve this equation by calculator i dont dont have calculator .... I did most of the work just solve this equation please dont dislike it please give positive ratting thank you... And if you have any doubts please comment i will be happy to help you.
#4 [5 points] A trapezoidal channel of bottom width 25 ft and side slope 1:2.5 carries...
A trapezoidal channel has a bottom width 10 ft and side slope of 2H:1V. It carries a discharge of 250 cfs at a water depth of 4.8ft. The channel is to pass under a highway and a culvert is proposed for a smooth transition from the channel to the culvert. You are asked to design this transition under the following design criteria: First of all, it is important to keep in mind that the culvert shall not act as a...
A grouted-riprap, trapezoidal channel (n=0.025) with a bottom width of 4 meters and side slopes of m=1 carries a discharge 12.5 m3/s on a 0.001 slope. a) Find depth of delta(L) using the standard step method b) Find delta(L) where y=yn (1.66m) using direct step method
A concrete-lined (smooth) trapezoidal channel with a bottom width of 10 ft and side slope 2 horizontal to 1 vertical has a slope 0,002 and is designed for a discharge of 160 cts. Determine the water depth in the channel,
A trapezoidal channel with a bottom width of 8ft and side slopes of 1V:1H is designed for a discharge of 160cfs. If the channel has a slope of 0.002, what will be the water depth if the Manning n is 0.017?
A trapezoidal channel has a bottom width, b, of 10.0 m and a side slope ratio of 3:1. The Manning’s n of the channel is 0.025, and it is laid on a slope of 0.001. If the water depth is 2 m at the downstream end, write and submit an R script to compute the water surface profile for a discharge of 30 m3 /s. Also submit a plot of the water profile in elevation (m) for 1000 m channel...
4.17. Design a riprap-lined trapezoidal channel that has a capacity of 1000 cfs and a slope of 0.0005 ft/ft. Crushed rock is to be used and the channel bottom width is not to exceed 15 f. Determine the riprap size, the side slopes, and the design depth of flow 4.17. Design a riprap-lined trapezoidal channel that has a capacity of 1000 cfs and a slope of 0.0005 ft/ft. Crushed rock is to be used and the channel bottom width is...
What is the average velocity in a PCC lined trapezoidal channel with a bottom width of 10 m, 1:1 side slopes, a channel slope of 3% when it is flowing at a depth of 2m? The n-value for PCC is 0.013.
A trapezoidal channel with bottom width of 10 m and side slopes of 1V:1.5H is carrying a flow of 80 m3/s. The channel bottom slope is 0.002 and n = 0.015. A dam is planned that will raise the flow depth to 10 m. Compute the flow depth by using standard step method in the channel 250, 500, and 750 m upstream of the dam.
A concrete-lined channel has a trapezoidal cross-section with a bottom width of 1.8 ft, side-slopes 1.5 (defined as horizontal: vertical), n the water depth is 2.7 ft, determine: (25 points) 2. 0.018, and a bed slope of 0.002 ft/ft. If a. Critica I depth (yd. Note: Because you need a solver to solve this problem (and I do not require a solving calculator for this midterm), all you need to do is set-up an equation that is in terms of...
(25 Points) Determine the critical depth in the trapezoidal drainage ditch shown below. The slope of the ditch is 0.0016, the side slopes are 1V:2.5H, the bottom width is b - 14', and the design discharge is 500 cfs. At this calculate the Froude number. 5