A trapezoidal channel with a bottom width of 8ft and side slopes of 1V:1H is designed...
A trapezoidal channel with bottom width of 10 m and side slopes of 1V:1.5H is carrying a flow of 80 m3/s. The channel bottom slope is 0.002 and n = 0.015. A dam is planned that will raise the flow depth to 10 m. Compute the flow depth by using standard step method in the channel 250, 500, and 750 m upstream of the dam.
(c) A trapezoidal channel, as shown below, has a base width b = 6 m and side slopes 1H:1V. The channel bottom slope is S=0.0002 and the Manning roughness coefficient is n=0.014. Compute: a) the depth of uniform flow if Q = 12.1 m3/s b) the state of the flow. Y Y. b = 6 m Fig. Q2c
A concrete-lined (smooth) trapezoidal channel with a bottom width of 10 ft and side slope 2 horizontal to 1 vertical has a slope 0,002 and is designed for a discharge of 160 cts. Determine the water depth in the channel,
#4 [5 points] A trapezoidal channel of bottom width 25 ft and side slope 1:2.5 carries a discharge of 450 cfs with a normal depth of 3.5 ft. The elevations at the beginning and end of the channel are 685 and 650 ft., respectively. Determine the length of the channel if n = 0.02. #5 [5 points] Water is flowing at a rate of 4.5 m3/s in a trapezoidal channel whose bottom width is 2.4 m and side slopes are...
A trapezoidal channel has a bottom width 10 ft and side slope of 2H:1V. It carries a discharge of 250 cfs at a water depth of 4.8ft. The channel is to pass under a highway and a culvert is proposed for a smooth transition from the channel to the culvert. You are asked to design this transition under the following design criteria: First of all, it is important to keep in mind that the culvert shall not act as a...
A grouted-riprap, trapezoidal channel (n=0.025) with a bottom width of 4 meters and side slopes of m=1 carries a discharge 12.5 m3/s on a 0.001 slope. a) Find depth of delta(L) using the standard step method b) Find delta(L) where y=yn (1.66m) using direct step method
('15 Marks) Question 4 An earth drainage ditch may be approximated a trapezoidal channel has a base width b = 6 m and side slopes 1H:1V. The channel bottom slope is So = 0.0002 and the Manning roughness coefficient is n = 0.014. Compute a) the depth of uniform flow if Q = 6.01 m/s b) the state of flow (25 Marks) Chapter 8 Question 5 brick channel designed to carry 5.5
Q1. For a uniform flow, a trapezoidal channel has a base width b = 8 m and side slopes 11:1V. The channel bottom slope is so = 0.0002 and the Manning roughness coefficient n = 0.016. Compute a) The depth of uniform flow if Q = 14.3 m3/s b) The state of flow. yo У. b= 8 m
A trapezoidal channel has a bottom width, b, of 10.0 m and a side slope ratio of 3:1. The Manning’s n of the channel is 0.025, and it is laid on a slope of 0.001. If the water depth is 2 m at the downstream end, write and submit an R script to compute the water surface profile for a discharge of 30 m3 /s. Also submit a plot of the water profile in elevation (m) for 1000 m channel...
A concrete-lined channel has a trapezoidal cross-section with a bottom width of 1.8 ft, side-slopes 1.5 (defined as horizontal: vertical), n the water depth is 2.7 ft, determine: (25 points) 2. 0.018, and a bed slope of 0.002 ft/ft. If a. Critica I depth (yd. Note: Because you need a solver to solve this problem (and I do not require a solving calculator for this midterm), all you need to do is set-up an equation that is in terms of...