pls do appreciate it by giving it a thumbs up. Thank you.
What is the average velocity in a PCC lined trapezoidal channel with a bottom width of...
A concrete-lined (smooth) trapezoidal channel with a bottom width of 10 ft and side slope 2 horizontal to 1 vertical has a slope 0,002 and is designed for a discharge of 160 cts. Determine the water depth in the channel,
#4 [5 points] A trapezoidal channel of bottom width 25 ft and side slope 1:2.5 carries a discharge of 450 cfs with a normal depth of 3.5 ft. The elevations at the beginning and end of the channel are 685 and 650 ft., respectively. Determine the length of the channel if n = 0.02. #5 [5 points] Water is flowing at a rate of 4.5 m3/s in a trapezoidal channel whose bottom width is 2.4 m and side slopes are...
4.17. Design a riprap-lined trapezoidal channel that has a capacity of 1000 cfs and a slope of 0.0005 ft/ft. Crushed rock is to be used and the channel bottom width is not to exceed 15 f. Determine the riprap size, the side slopes, and the design depth of flow 4.17. Design a riprap-lined trapezoidal channel that has a capacity of 1000 cfs and a slope of 0.0005 ft/ft. Crushed rock is to be used and the channel bottom width is...
A trapezoidal channel with a bottom width of 8ft and side slopes of 1V:1H is designed for a discharge of 160cfs. If the channel has a slope of 0.002, what will be the water depth if the Manning n is 0.017?
Question 6 A concrete-lined trapezoidal channel with uniform flow has a normal depth of 1.5 m. The base width is 4 m and the side slopes are equal at 1 vertical to 2 horizontal. Mannin‘s n-0015. The bed slope 0.001 Compute the mean velocity and discharge. If the above channel were to be designed for flooding, it may have a section like in Figure below 8 m 8 m 4 m When the flow goes over the top of the...
A trapezoidal channel with bottom width of 10 m and side slopes of 1V:1.5H is carrying a flow of 80 m3/s. The channel bottom slope is 0.002 and n = 0.015. A dam is planned that will raise the flow depth to 10 m. Compute the flow depth by using standard step method in the channel 250, 500, and 750 m upstream of the dam.
A concrete-lined channel has a trapezoidal cross-section with a bottom width of 1.8 ft, side-slopes 1.5 (defined as horizontal: vertical), n the water depth is 2.7 ft, determine: (25 points) 2. 0.018, and a bed slope of 0.002 ft/ft. If a. Critica I depth (yd. Note: Because you need a solver to solve this problem (and I do not require a solving calculator for this midterm), all you need to do is set-up an equation that is in terms of...
A trapezoidal channel has a bottom width, b, of 10.0 m and a side slope ratio of 3:1. The Manning’s n of the channel is 0.025, and it is laid on a slope of 0.001. If the water depth is 2 m at the downstream end, write and submit an R script to compute the water surface profile for a discharge of 30 m3 /s. Also submit a plot of the water profile in elevation (m) for 1000 m channel...
A grouted-riprap, trapezoidal channel (n=0.025) with a bottom width of 4 meters and side slopes of m=1 carries a discharge 12.5 m3/s on a 0.001 slope. a) Find depth of delta(L) using the standard step method b) Find delta(L) where y=yn (1.66m) using direct step method
A flow of 32 m2/sec occurs in an earth-lined trapezoidal channel having base width 3.0m, side slopes 1V:2H and n=0.022. Calculate the critical depth. Select one: O a. 1.902 m O b. 1.702 m O c 1.602 m O d. 1.502 m O e. 1.802 m