6. A 10-GHz line-of-sight microwave communication link consists of two lossless parabolic dish antennas, each has...
Designing a High speed Wireless Data Link Line of Sight Link Budget Analysis Several major factors that can impact the performance of a radio system are Available/permitted output power e Bandwidth, . Receiver sensitivity Antenna gains In this case study, the students will be required to calculate the link budget for a LOS Wireless link. Read through the following to understand some of the aspects and elements that need to be considered when calculating a Link Budget. If the estimated/calculated...
Solve the multi-task problem: The LEO cellular satellite communication system requires the forward link (from satellite to the earth mobile) signal-to-noise ratio (SNR) in the output of the earth station receiver to be 17dB. The link has the following specifications: Operation frequency f = 6 GHz Receiver antenna gain (earth station), Gr = 0 dB Transmitter antenna gain (satellite), Gt = 3 dB Distance to satellite, d = 1000 km Bandwidth of the receiver, B = 2 MHz Noise...
We wish to implement a 5 GHz communication link between Engineering building and Library (70 m apart). A100 mW transmitter power is available and the minimum detectable signal at the receiver is -80 dBm. a) Would a "wired connection consisting of a coaxial line with attention of 1.5 dBm be capable of doing the job? Explain. b) Would a wireless comme son consisting of identical transmit and receive antemas with 3 dB gain be capable of demg the job? c)...
Problem #2: (40 points) Consider the following communication link. Both the transmitter and receivers are properly matched to their respective antennas. Assume that the system nominal temperature is 290 K. A detailed block diagram of the receiver is shown in the figure Determine 1. The effective isotropic radiated power in dBm. 2. The space loss in dB 3. The communication link total losses in dB 4. What would be the received power at the receiver input in dBm? 5. What's...