a sample of water has a temperature of 100 degrees Celsius and a pressure of 101.42 kPa. What is its specific density (m^3/kg) and internal energy (kJ/kg)?
a sample of water has a temperature of 100 degrees Celsius and a pressure of 101.42...
Water at 10 degrees Celsius and a velocity of 2.5 m/s is flowing along a 4.5 m long flat plate at a uniform temperature of 40 degrees Celsius. If the plate is 1.5 m wide, determine: a) the distance from the leading edge of the plate where the flow becomes turbulent, b) the heat transfer rate between the plate and the flowing water, c) the fraction of the force exerted by the water on the first half of the plate...
A group of students place a 0.045 kg water sample, initial temperature 21.5 degrees Celsius, on a heat source. The water is then warmed up to its boiling point then further heated until it is completely evaporated. Note: Both the heat source and the water are in a thermally isolated container. i. Find the total heat absorbed by the water during this process. ii. A similar experiment is performed on an unknown liquid, mass=0.055kg with initial temperature 21.5 degrees Celsius....
A cup of water at Temperature of 21 degrees Celsius with .5 [kg] of water is sliding on a table. It starts sliding at 20 [m/s] and slows to a halt. Assuming that the cup itself is (almost) massless, and that all the energy has gone into heat, what is the final temperature of the water?
A solution of ethylene glycol in water at 20 degrees celsius has a mass percent of 9.78% of ethylene glycol with a density of 1.0108 g/mL. The freezing point depression constant for water (solvent for all solutions) is Kf=-1.86 percent celsius kg/mol and the boiling point elevation constant is Kb=0.512 degrees celsius kg/mol. The density of neat water at 20.0 degrees celsius is 0.9982 g/mL. Answer the following: 1. What is the molarity of the solution? 2. What is the...
A gas sample had an inknown pressure with a temperature of 42 degrees Celsius. The same gas has a pressure of 2.83 atm when the temperature is -18 degrees Celsius, with no change in volume or amount of gas. What is the initial pressure, in atm, of the gas? Agas sample has a unknown pressure with a temperature of 42°C. The same gas has a pressure of 2.83 atm when the temperature is -18°C with no change in the volume...
2. The Rhett Butler Peach, Co. dips the peaches in boiling water (100 degrees Celsius) to remove the skin (a process known as blanching) before canning them. The wastewater from the process is high in organic matter and it must be treated prior to disposal. The treatment process is a biological process that operates at 20 degrees Celsius. Thus, the wastewater must be cooled to 20 degrees before disposal. Forty cubic meters of wastewater is discharged to a concrete tank...
What is the final temperature when 100 g of iron at 90 degrees Celsius is placed in 400 g of water at 25 degrees Celsius? The specific heat capacity of iron 0.45 J/g*K and the specific heat capacity of water is 4.184 J/g*K.
What is the final temperature when 100 g of iron at 90 degrees Celsius is placed in 400 g of water at 25 degrees Celsius? The specific heat capacity of iron 0.45 J/g*K and the specific heat capacity of water is 4.184 J/g*K
A liquid has a vapor pressure of 100 mm Hg at 25 degrees celsius. If the heat of vaporization is 15 kj /mol, what is the normal boiling point?
A sample of N2 gas has a volume of 25.0 L at a pressure of 1.50 atm and a temperature of 23 degrees Celsius. What volume, in liters, will the gas occupy at 3.50 atm and 251 degrees Celsius? Assume ideal behavior. V= L