Water with density 1000 kg/m3 is flowing in a horizontal pipe with vi 10 m/s to...
Pre-discussion # 8- Fluid Dynamics & Heat & Thermodynamics NAME: 1. Water with density 1000 kg/m is flowing in a horizontal pipe with vi 10 m/s to the right. The radius of the pipe is 5.0 cm. The ratio of radius at point 1 to point 2 is ri/tr:-2, and ri equals to r. The flow is laminar. Ignore friction. (a) Find the flow rate at point 1, 2, and 3. 1v (b) Find vi at point 2. (c) Find...
A horizontal pipe carries a smoothly flowing liquid with density 1.23x10^3 kg/m3. At locations 1 and 2 along the pipe the diameters are 5.89 cm and 3.85 cm, respectively. Is the flow speed at location 2 higher or lower than at location 1? Part2 The flow speed at location 1 is 2.79 m/s. What is the pressure difference between location 2 and location 1 (including its sign)? Ignore viscosity. Answer in Pa
A horizontal pipe carries a smoothly flowing liquid of density of 1190 kg/m3. At Locations 1 and 2 along the pipe, the diameters are d1=6.63 cm and d2=2.45 cm, respectively.The flow speed at Location 1 is 2.33 m/s. What is the pressure difference ΔP between Location 2 and Location 1 (including its sign)? Ignore viscosity.
A horizontal pipe carries a smoothly flowing liquid of density of 1330 kg/m3. At locations 1 and 2 along the pipe, the diameters are d1= 6.87 cm and d2= 2.15 cm, respectively. The flow speed at location 1 is 2.71 m/s. What is the pressure difference, delta P between Location 2 and Location 1 (including its sign)? Ignore viscosity.
A horizontal pipe carries a smoothly flowing liquid of density of 1110 kg/m3. At Locations 1 and 2 along the pipe, the diameters are d1=5.45 cm and d2=2.83 cm, respectively. The flow speed at Location 1 is 2.83 m/s. What is the pressure difference ΔP between Location 2 and Location 1 (including its sign)? Ignore viscosity.
A horizontal pipe carries a smoothly flowing liquid of density of 1310 kg/m3. At Locations 1 and 2 along the pipe, the diameters are d5.19 cm and 2 3.75 cm, respectively. Is the flow speed at Location 2 higher or lower than the flow speed at Location 1? O higher di Location 2 d2 Location 1 cannot tell from the data O lower The flow speed at Location 1 is 2.33 m/s. What is the pressure difference Δ between Location...
40 N"s/m2 and ?-1000 kg/m3 is flowing through a circular pipe umetric flow rate (Q) of the oil is 1*10 m'/s, determine: 1) (2096) Oil with viscosity of with diameter D 0 0.1 m. If the volu a. b. If the flow is laminar or turbulent Th e pressure drop over a 20 m length of p ipe in kPa
Review A water filled pipe has water flowing at v1= 6.20 m/s in a section of pipe where the diameter is d1= 19.2 cm and the pressure is known to be P1= 7.00×104 N/m2 above atmospheric pressure. 1- If the pipe carries the water 3.5 meters up hill without any change in diameter, what is the new absolute pressure within the pipe? 2- After flowing up the hill described above, the pipe narrows to 80% of its original radius, what...
Consider a pipe with water (p = 1000 kg/m3, u = 1.12 x 10-3 Ns/m2) flowing in it at 5 m/s. The pipe is concrete, with a roughness of 2 mm. The pipe inner diameter is constant at 5 cm. If the pipe is 50 m long, what is the pressure drop in the pipe due to friction? Moody chart is on page 7.
FIGURE 1 shows a branching pipe system through which is flowing water of density 1000 kg m-3 and viscosity 1.0 x 103 Pa s. 2. AVI Diameter at A 600 mnm Diameter at B500 mm Diameter at C 300 mm FIG. 1 If the volumetric flowrate at point A is 586 m3 h1 and the flow velocity at point C is 0.61 m s-1 determine: the mass flowrate at pointB a. b. the Reynolds number of the flow at point...