Homework Answers
Add Answer to:
5. A uniform beam of mass M- 250 kg and length l- 10.0 m is mounted...
help 5. A uniform beam of mass M-250 kg and length / 10.0 m is mounted...
help
5. A uniform beam of mass M-250 kg and length / 10.0 m is mounted to a wall by a strong hinge and a cable, as shown. A steel block of mass m 685 kg is placed on the beam a distancex 2.5 m from the hinge. The cable is at an angle 6 400, as shown. 6/ a. Calculate the tension in the cable. b. Calculate the horizontal component of the force the hinge exerts on the beam....
As shown below, a beam of mass M = 34 kg and length L = 6.8...
As shown below, a beam of mass M = 34 kg and length L = 6.8 m is attached to a vertical wall by a hinge and to a horizontal ceiling by a cable. The angle between the beam and the wall is theta = 75 degree, the angle between the cable and the ceiling is phi = 58 degree, and the cable is attached to the beam at a point which is a distance s = 2.2 m from...
The figure shows a uniform, horizontal beam (length = 10.0 m, mass = 30.0 kg) that...
The figure shows a uniform, horizontal beam (length = 10.0 m, mass = 30.0 kg) that is held by a horizontal pin (pivoted at the wall), with its far end supported by a cable that makes an angle of 51 degree with the horizontal. A person of mass M stands 3.00 magnitude of 454 N. (a) Calculate the mass M of the person standing on the beam? (b) What are the horizontal and vertical components of the force the pin...
A uniform beam of length 10.0 m and mass 50.0 kg is attached to a wall...
A uniform beam of length 10.0 m and mass 50.0 kg is attached to a wall at one end and free to pivot at this point. The beam is held horizontal by a cable attached to the far end of the beam and to a point on the wall 5.77 m above the pivot point. The angle between the beam and the cable is 30 degrees. A. What is the tension in the cable? B. What force is exerted by...
o. (15 points total) A uniform beam of length 3.00 m and mass 25.0 kg is...
o. (15 points total) A uniform beam of length 3.00 m and mass 25.0 kg is fixed to a wall by a hinge. A cable is attached to the end of a beam and to a point on a wall making an angle of 28.0° with the horizontal. A 50.0-kg mass is suspended from the beam at a point 2.10 m from the wall (8 points) What is the tension in the cable? a. 50-kg (7 points) What are the...
12. (20 points total) A uniform beam of length 3.00 m and mass 25.0 kg is...
12. (20 points total) A uniform beam of length 3.00 m and mass 25.0 kg is fixed to a wall by a hinge. A cable is attached to the end of a beam and to a point on a wall making an angle of 28.0° with the horizontal. A 50.0-kg mass is suspended from the beam at a point 2.10 m from the wall. a. (10 points) What is the tension in the cable? 50-kg b. (10 points) What are...
A uniform metal pole of mass 20.0 kg and length 5.00 m is bolted horizontally to...
A uniform metal pole of mass 20.0 kg and length 5.00 m is bolted horizontally to a vertical wall. A cable is tied at the far end and exerts a force at an angle of 13 degrees to the beam, as shown. a. What is the tension in the cable? 13 370
A beam is attached to a vertical wall with a hinge. The mass of the beam...
A beam is attached to a vertical wall with a hinge. The mass of the beam is 1800 kg and it is 4 m long. A steel support wire is tied from the end of the beam to the wall, making an angle of 30° with the beam (see the figure below). 1)Calculate the tension in the support wire. Assume the beam has a uniform density. kN 2)What is the vertical component of the force exerted by the hinge on...
A 4-m long, 150-kg steel beam is attached to a wall with one end connected to a hinge that allows the beam to rotate up and down. The other end of the beam is held in a horizontal position with a cable that makes a 27° angle with the beam and is attached
A 4-m long, 150-kg steel beam is attached to a wall with one end connected to a hinge that allows the beam to rotate up and down. The other end of the beam is held in a horizontal position with a cable that makes a 27° angle with the beam and is attached to the wall. A mass of 75 kg is hung from the beam 3 meters away from the hinge (see (Figure 2)). What is the vertical component of...
A 12.0 m uniform beam is hinged to a vertical wall and held horizontally by a...
A 12.0 m uniform beam is hinged to a vertical wall and held horizontally by a 5.00 m cable attached to the wall 4.00 m above the hinge, as shown in the figure below (Figure 1).The metal of this cable has a test strength of 0.900 kN which means that it will break if the tension in it exceeds that amount. You may want to review For related problem solving tips and strategies, you may want to view a Video...
help
5. A uniform beam of mass M-250 kg and length / 10.0 m is mounted to a wall by a strong hinge and a cable, as shown. A steel block of mass m 685 kg is placed on the beam a distancex 2.5 m from the hinge. The cable is at an angle 6 400, as shown. 6/ a. Calculate the tension in the cable. b. Calculate the horizontal component of the force the hinge exerts on the beam....
As shown below, a beam of mass M = 34 kg and length L = 6.8 m is attached to a vertical wall by a hinge and to a horizontal ceiling by a cable. The angle between the beam and the wall is theta = 75 degree, the angle between the cable and the ceiling is phi = 58 degree, and the cable is attached to the beam at a point which is a distance s = 2.2 m from...
The figure shows a uniform, horizontal beam (length = 10.0 m, mass = 30.0 kg) that is held by a horizontal pin (pivoted at the wall), with its far end supported by a cable that makes an angle of 51 degree with the horizontal. A person of mass M stands 3.00 magnitude of 454 N. (a) Calculate the mass M of the person standing on the beam? (b) What are the horizontal and vertical components of the force the pin...
o. (15 points total) A uniform beam of length 3.00 m and mass 25.0 kg is fixed to a wall by a hinge. A cable is attached to the end of a beam and to a point on a wall making an angle of 28.0° with the horizontal. A 50.0-kg mass is suspended from the beam at a point 2.10 m from the wall (8 points) What is the tension in the cable? a. 50-kg (7 points) What are the...
12. (20 points total) A uniform beam of length 3.00 m and mass 25.0 kg is fixed to a wall by a hinge. A cable is attached to the end of a beam and to a point on a wall making an angle of 28.0° with the horizontal. A 50.0-kg mass is suspended from the beam at a point 2.10 m from the wall. a. (10 points) What is the tension in the cable? 50-kg b. (10 points) What are...
A uniform metal pole of mass 20.0 kg and length 5.00 m is bolted horizontally to a vertical wall. A cable is tied at the far end and exerts a force at an angle of 13 degrees to the beam, as shown. a. What is the tension in the cable? 13 370
A 12.0 m uniform beam is hinged to a vertical wall and held horizontally by a 5.00 m cable attached to the wall 4.00 m above the hinge, as shown in the figure below (Figure 1).The metal of this cable has a test strength of 0.900 kN which means that it will break if the tension in it exceeds that amount. You may want to review For related problem solving tips and strategies, you may want to view a Video...
Most questions answered within 3 hours.
-
Living in a group could bring several disadvantages to an
individual. What are some of the...
asked 13 minutes ago -
Complete and balance the following reactions. In case of no
reaction occurring write NR.
Mix #1:...
asked 18 minutes ago -
If an economy consumes 75% of any increase in income, then an
increase in autonomous investment...
asked 22 minutes ago -
A shotputter throws the shot with an initial speed of 15.8 m/s
at a 38.0 ∘...
asked 37 minutes ago -
Debra and Merina sell electronic equipment and supplies through
their partnership. They wish to expand their...
asked 38 minutes ago -
How does a linear regression allow you to better estimate
trends, costs, and other factors in...
asked 46 minutes ago -
1. (15%) Describe the difference between a pull (Kanban), push
and CONWIP production systems.
asked 42 minutes ago -
QUESTION 5
The total area under the Z distribution curve is equal to:
a.
10
b....
asked 51 minutes ago -
Using Python
The variables x and y refer to numbers. Write a code segment
that prompts...
asked 1 hour ago -
If
the coefficient of static friction between a box and the floor is
0.35 with what...
asked 1 hour ago -
A die is designed to punch holes with a radius of 1.08 10-2 m in
a...
asked 1 hour ago -
government can increase import through
a. export subsidies
b. tax breaks
c. increase import tax
d....
asked 1 hour ago