A 90-kg (including any equipment) skydiver drops out of a plane. Using an air density of 1.0 kg/m3, a frontal surface area of 1.0 m2, and a drag coefficient of 0.8, what will the skydiver's terminal velocity be? A. Less than 50 m/s B. Between 50 and 100 m/s C. Between 100 and 150 m/s D. More than 150 m/s
v= square root -2 (90) (-9.81)sin90/.8(1.0)(1.0)
A 90-kg (including any equipment) skydiver drops out of a plane. Using an air density of...
Part 1 How fast do small water droplets of 0.23 um (23 x 108 m) diameter fall through the air under standard sea-level conditions? Assume the drops do not evaporate. Repeat the problem for standard conditions at 5000-m altitude. (a) For the condition that the droplets are falling at a constant velocity, what is the relation between the weight ofa drop W, the buoyancy force Fe, and the drag force F? (b) What is the expression for the weight of...
Work out #5, clearly and with units. Please and thank you! plane of the rectangle? (b) How much angular momentum and kinetic energy does the array have if it rotates at an angular velocity of 20 rad/s? 3. Determine the minimum area of a flat ice floe (sheet) 100 cm thick if it must support a 1600-kg truck above seawater. Assume the top of the ice is level with the ocean. (Hint: what is the volume of the ice?) Pice...
2. The electric vehicle Tesla Model S has a drag coefficient of 0.24, a mass of 2100 kg, and a frontal area of 2.4 m2. The coefficient of rolling resistance of its tires is 0.01. Recall the density of air at sea level is 1.3 kg/m3. How much kinetic energy is required to overcome rolling resistance and air resistance (drag) at Autobahn speeds of 180 km/hr for a 200 km trip? How much useful energy (in MJ) and money (in...
* This is all the information given QUESTION 1 (iii,iv) PLEASE!!!: Examine the car performance when the angle of both the front and rear wings is set to θ = 10◦. In all the analysis that follows ignore frictional losses other than drag. Determine: (iii) What is the maximum speed the vehicle can safely corner a bend with R = 30 m (ans. 108Km/hr). What is the power required at this speed? (ans. 27.8KW) (iv) What is the maximum speed...
* This is all the information given QUESTION 1 (iii,iv) PLEASE!!!: Examine the car performance when the angle of both the front and rear wings is set to θ = 10◦. In all the analysis that follows ignore frictional losses other than drag. Determine: (iii) What is the maximum speed the vehicle can safely corner a bend with R = 30 m (ans. 108Km/hr). What is the power required at this speed? (ans. 27.8KW) (iv) What is the maximum speed...
summarizr the followung info and write them in your own words and break them into different key points. 6.5 Metering Chamber: 6.5.1 The minimum size of the metering box is governed by the metering area required to obtain a representative test area for the specimen (see 7.2) and for maintenance of reasonable test accuracy. For example, for specimens incorporating air spaces or stud spaces, the metering area shall span an integral number of spaces (see 5.5). The depth of...
summatize the following info and break them into differeng key points. write them in yojr own words apartus 6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...