3) Abow load is power by a 60 Hz, 240V line. He power factor PF G...

Question

Question

3) Abow load is power by a 60 Hz, 240V line. He power factor PF G 0.7071 lagging Caleulate the parallel Capacitance required

Answer 1

Answer #1

solution! The The Given the real power p = bow, loso, = 0.7071 lagg apparent power s upport te am - 84.99 va reachine power Q

Answer 2

Similar Homework Help Questions

A 50 kW load operates from a 60 Hz and 10kV line with a power factor...

A 50 kW load operates from a 60 Hz and 10kV line with a power factor of 0.6 lagging. Compute the capacitance that must be placed in parallel with the load to achieve 0.9 lagging power factor. In-Class #10 Problem A 50 kW load operates from a 60 Hz and 10 kV line with a power factor of 0.6 lagging. Compute the capacitance that must be placed in parallel with the load to achieve 0.9 lagging power factor.
Chapter 9, Problem 9.096 A particular load has a pf of 0.4 lagging. The power delivered...

Chapter 9, Problem 9.096 A particular load has a pf of 0.4 lagging. The power delivered to the load is 40 kW from a 220-V rms 60-Hz line. What value of capacitance placed in parallel with the load will raise the pf to 0.5 lagging? mF the tolerance is +/-2%
Example 9 Three loads are connected in parallel across 1400 V, 60 Hz supply: Load 1:...

Example 9 Three loads are connected in parallel across 1400 V, 60 Hz supply: Load 1: 125 KVA, 0.28 PF lag Load 2: 10 kW, 40 kVAR capacitive load Load 3: 15 kW Find the total kW, kVAR, KVA, and the supply power factor . The KVAR and the capacitance in mF of the capacitor needed to improve the PF to 0.8 lagging

5. A Load is drawing 800W from a 240v, 50 Hz supply source at o.84 PF....

5. A Load is drawing 800W from a 240v, 50 Hz supply source at o.84 PF. If The PF has to be improved to unity, what should be the value of capacitance of a capacitor which is connected across the load? (3 pts)
A 240V three phase power system supplies two loads in parallel: Load 1: measured line current...

A 240V three phase power system supplies two loads in parallel: Load 1: measured line current 30A, power factor 0.85 lagging, and Load 2: measured power 10kW, reactive power -7.5kVar A. Determine the power factor of load 2. B. Determine the total real power (in kW), reactive power (in kVAR), apparent power (in kVA), power factor and line current (in A) of the two loads.
(6) An air conditioner operates at 240V rms at a frequency of 60 Hz. It absorbs...

(6) An air conditioner operates at 240V rms at a frequency of 60 Hz. It absorbs an average power of 9 kW at a lagging power factor, Fp of 0.75. The power triangle for a load system is shown in Figure Q4(b). SI 0° P Figure Q4(b) Determine the complex power of the load. (4 marks) (ii) Determine the capacitive element required to raise the power factor to 0.88. (7 marks) (iii) Analyze the effect of power factor correction in...

The load shown operates at 60 Hz. What are the pf and pf angle of this...

The load shown operates at 60 Hz. What are the pf and pf angle of this load? Is it leading or lagging? To what value should the capacitor be changed to get a lagging pf of 0.8? 8Ω 2 H Fig. P9.22
Q-1 A 60Hz, 480V/240V,960V A transformer is supplying a 960W passive load at 240V. The resistances...

Q-1 A 60Hz, 480V/240V,960V A transformer is supplying a 960W passive load at 240V. The resistances of the primary side and secondary side of the transformer are 1.092 and 0.252 respectively. If the no load losses of the transfomer is given by P-Vã 4800 W where Vn is the input voltage of the transformer in Volt. Answer the following: a) Calculate transformer efficiency b) Do you allow this transformer to be connected to 240V 50Hz distribution system? Explain. c What...
A single Phase load draws 10 kW from a 410 V line at a power factor...

A single Phase load draws 10 kW from a 410 V line at a power factor of 0.707 lagging. Determine: (a) The rms current (b) The reactive power required by the load (c) We want to correct the power factor to be 0.9 lagging by adding a capacitor, what will be the new reactive power? (d) draw the power triangle with the old and new reactive powers

A 3-phase 60 Hz 50 km transmission line delivers 20 MW of power to a load...

A 3-phase 60 Hz 50 km transmission line delivers 20 MW of power to a load at 69 kV and a power factor of 0.8 lagging. The line has the following parameters r = 0.1112/km L = 1.11 mH/km C = negligible Determine: The line impedance. (4 Marks) The "receiving end" phase voltage and current (7 Marks) The "sending end" voltage and current (10 Marks) The voltage regulation. (4 Marks)