The EPA's maximum allowed SO2 emissions for a coal burning power plant is 516 g per gigajoule of primary energy in the fuel. If a coal-burning plant with an electric power output of 1 GWe were to emit at this maximum rate, how much SO2 would it emit in a year?
The EPA's maximum allowed SO2 emissions for a coal burning power plant is 516 g per...
A coal-burning power plant generates 2.5 × 1016 J per year. If the coal yields 33 kJ/g, how many grams of coal was burned each year?
A 350 MW coal-burning power plant consumes 4478 tons of coal per day when it operates at full load. Given the energy content of the coal used in this power plant 21 million Btu/ton, what is the heat rate of this power generation plant? A 350 MW coal-burning power plant consumes 4478 tons of coal per day when it operates at full load. Given the energy content of the coal used in this power plant 21 million Btu/ton, what is...
At a coal-burning power plant a steam turbine is operated with a power output of 558 MW . The thermal efficiency of the power plant is 39 % . You may want to review A)At what rate is heat discarded to the environment by this power plant? B) At what rate must heat be supplied to the power plant by burning coal?
A coal fired power plant generates SO2. If 1593 tons of SO2 per year is emitted from a 150 megawatt plant, calculate the sulfur content of the coal to be used if it has a heating value of 30000 kJ/kg. Is there any better coal?
Be sure to answer all parts. A coal-burning power plant generates 5.5 x 1016 J per year. If the coal yields 38 kJ/g, how many grams of coal was burned each year? x 10 g Enter your answer in scientific notation.
A coal-fired steam power plant produces 175 MW of electric power. The power plant operates on a Rankine cycle with turbine inlet conditions of 7 MPa and 550oC and a condenser pressure of 15 kPa. The turbine efficiency and pump efficiency are both 0.8. The coal has a heating value (energy released when the fuel is burned) of 29,300 kJ/kg. Assuming that 85 percent of this energy is transferred to the steam in the boiler and that the electric generator...
7.4 A coal-fired 930-MW power plant is operating under the following conditions: Coal carbon content C = 80%, coal ash content A = 6%, and heating value LHV = 30 MJ/kg Cooling water temperature difference Atew = 10.5 K Plant electrical efficiency ne is 0.43 and capacity factor CF is 0.82. Boiler efficiency n = 0.92 ESP efficiency nesp = 99% Calculate (a) the plant fuel rate, (b) the hourly and annual CO, emission rates, (c) the specific CO2 emissions...
Please answer Questions e-f-g-h: (a) The boiler of a power plant operates at a maximum temperature of 750oC. The condenser of the power plant draws in cooling water at 20oC. What is the theoretical maximum efficiency of the plant? (b) Now suppose that a real power plant is built to have an efficiency that is 80% of the theoretical efficiency. The power plant needs to generate 1GW (giga-watt) of power. How much energy (per second) needs to be supplied by...
A typical large coal fired electric power plant produces 1,200MW of electricity by burning fuel with energy content of 3,000 MW. Three hundred and forty (340) MW are lost as heat up the smokestack leaving the rest to drive a generator to produce electricity. However, the thermal efficiency of the turbine is only 45%. That is 45% of the remaining power goes to drive the generator, and 55% is waste heat that must be removed by cooling water. Assume that...
32 Suppose a utility generates electricity with a 36 percent efficient coal-fired power plant emitting the legal limit of 0.6 lb of SO2 per million Btus of heat into the plant. Suppose the utility encourages its customers to replace their 75-W incandescents with 18-W com pact fluorescent lamps (CFLs) that produce the same amount of light. Over the 10,000-hr (a) How many kilowatt-hours of electricity would be saved? (b) How many 2,000-lb tons of SO2 would not be emitted? (c)...