A Bearing A is a deep groove type and bearing B is an angular contact sölid...
Table 11-2 Dimensions and Load Ratings for Single-Row 02-Series Deep-Groove and Angular-Contact Ball Bearings Load Ratings, kN Fillet Shoulder Width, Radius, Deep Groove Angular Contact Bore, OD, Diameter, mm ds C10 с. Сто Co mm mm mm mm 10 30 9 0.6 12.5 27 5.07 2.24 4.94 2.12 12 32 10 0.6 28 6.89 3.10 7.02 3.05 14.5 15 35 11 0.6 17.5 31 7.80 3.55 8.06 3.65 17 40 12 0.6 19.5 34 9.56 4.50 9.95 4.75 20 47...
A 02-series angular contact ball bearing with a 10-mm bore is loaded with a 0.3604 kN axial load and 100 kN radial load. The inner ring rotates at 8000 rev/min and working 2000-hour service. For Rd = 93% and af = 1. (a) Determine the equivalent radial load that will be experienced by the bearing. (b) Consider a rating rated life of 10^6 revolutions find C10 load experienced by bearing and calculate the factor of safety in carrying the load...
tables that would help u Q-4 An 02-series single-row deep-groove ball bearing with a 30-mm bore (see Tables 11-1 and 11-2 for specifications) is loaded with a 2-kN axial load and a 5-KN radial load. The inner ring rotates at 400 rev/min. (a) Determine the equivalent radial load that will be experienced by this particular bearing. [15 pts.] (6) Determine the predicted life (in revolutions) that this bearing could be expected to give in this application with a 99 percent...
Need step by step solution please The figure shown is a geared countershaft with an overhanging pinion at C. Select an angular- contact ball bearing from Table 11-2 for mounting at O and an 02-series cylindrical rolleor bearing from Table 11-3 for mounting at B. The force on gear A is FA 5 600 lbf, and the shaft is to run at a speed of 420 rovimin. Solution of the statics problem gives force of bearings against the shaft at...