Find the power production (in MW) of a 25 m radius wind turbine if the average wind speed is 12 m/s and the efficiency of this turbine in converting kinetic energy of air to mechanical work is 10%? The density of air is 1.20 kg/m3 .
Find the power production (in MW) of a 25 m radius wind turbine if the average...
the power coefficient of a wind turbine having a rotational speed of 2.1 rad/sec. Assume the wind velocity is 12 m/s, the tip speed ratio 7.45, the air density 1.21 kg/m3 and the mechanical power extracted by wind turbine 2.5 MW?
. A typical commercial wind turbine costs approximately $2 million per MW of installed power and requires 5.76 TJ per million dollars of energy to manufacture the wind turbine. (a) Calculate the amount of energy that is consumed (i.e. energy invested) in the manufacture ofa 1.5 MW wind turbine, assuming that turbine manufacture requires 5.76 TJ per million dollars spent. (TJ Tera-joules 1012 joules) (b) If the wind turbine has blades that are 40 meters (radius) long and the average...
A very large wind turbine is used to extract power from the wind. The turbine has a diameter of 120 meters. What is the maximum power this turbine can extract from the wind. Assume a wind speed of 10 m/s and the density of air is 1.2 kg/m3. 3.40 MW 6.80 MW 4.02 MW 7.52 MW
A wind-turbine has a propeller radius of 30 m, rated speed of 10 m/s and 30% efficiency at the rated speed. a) Calculate the rated power for this wind turbine. (air density is 1.2 kg/m). b) If this turbine produces 2 GW-h energy in one year, what is its capacity factor?
3. A wind turbine has blades, which sweep out an area of diameter 25 m 25m blades Fig. 5.1 (a) The wind is blowing directy towards the wind turbine at a speed of 12 m/s. At this wind speed, 7500 kg of air passes every second through the circular area swept out by the blades. U) Calculate the kinetic energy of the air travelling at 12 m /s, which passes through the circular area in 1 second Kinetic energy. The...
21. Determine the power output of a wind turbine whose blades are 12 m in diameter and when the wind speed is 6 m/s, the air density at sea level is about 1.2 kg/m3, and the maximum nower coefficient for this wind turbine is 0.35.
Problem 2 A three-blade wind turbine captures 1.8 MW from wind moving horizontally with respect to the plane. If the upwind speed is 16 m/s and the coefficient of performance is 25%, compute the length of the blade. Assume the density of air is 1 kg/m3.
Question 30 6 points Save Answer (LO4) A wind turbine with a 40-m-diameter rotor is rotating at 21 rpm under steady winds at an average velocity of 14.7 m/s. The electrical power output from the generator is 350 kW. The efficiency of the gearbox is 93% and generator efficiency is 86%. Take the density of air to be 1.013 kg/m. Answer the following questions; use the white paper to work-out your calculations and then choose the correct answer from the...
2. A wind turbine has the maximum power output at the rated speed of 12 m/s and a rotor diameter of 82 meters. The cut-in and cut-out speeds for this type of wind turbine are 4 m/s and 23 m/s, respectively. The table below shows the annual wind data near a potential site for setting up a wind farm using this type of wind turbine and the power coefficient of the wind turbine at the specific wind speed. The air...
An industrial wind turbine has blades that are 35 m long. On a 20?C day, wind at atmospheric pressure blows with a velocity of 12 m/s , and wind in the turbine wake only has a velocity of 11 m/s .(a) If we assume that all of the kinetic energy lost by the wind is converted to electrical energy by the turbine, then what is the power generated by this turbine? (density is 1.205 kg/m^3)(b) This turbine is rated as...