A very large wind turbine is used to extract power from the wind. The turbine has a diameter of 120 meters. What is the maximum power this turbine can extract from the wind. Assume a wind speed of 10 m/s and the density of air is 1.2 kg/m3.
3.40 MW
6.80 MW
4.02 MW
7.52 MW
A very large wind turbine is used to extract power from the wind. The turbine has...
21. Determine the power output of a wind turbine whose blades are 12 m in diameter and when the wind speed is 6 m/s, the air density at sea level is about 1.2 kg/m3, and the maximum nower coefficient for this wind turbine is 0.35.
the power coefficient of a wind turbine having a rotational speed of 2.1 rad/sec. Assume the wind velocity is 12 m/s, the tip speed ratio 7.45, the air density 1.21 kg/m3 and the mechanical power extracted by wind turbine 2.5 MW?
Find the power production (in MW) of a 25 m radius wind turbine if the average wind speed is 12 m/s and the efficiency of this turbine in converting kinetic energy of air to mechanical work is 10%? The density of air is 1.20 kg/m3 .
2. A wind turbine has the maximum power output at the rated speed of 12 m/s and a rotor diameter of 82 meters. The cut-in and cut-out speeds for this type of wind turbine are 4 m/s and 23 m/s, respectively. The table below shows the annual wind data near a potential site for setting up a wind farm using this type of wind turbine and the power coefficient of the wind turbine at the specific wind speed. The air...
(4 points) A large wind turbine is used for electricity generation. The turbine has a blade span diameter of 53 m and is installed in an area that has steady winds at 5.6 m/s. The efficiency of this wind turbine-generator is 34.8 %. The density of the air is 1.25 kgm3kgm3. What is the power generated from this windmill? If the blade span diameter is reduced by 33 %, the efficiency of the turbine-generator increases to 73.428 %. What is...
A 20-m/sec wind speed enters a two-bladed, high speed wind turbine .What should be the rotor diameter of this turbine to attain power of 100 kW at power coefficient of 0.3? Also calculate the rotor speed and torque produced. Assume the density of Air 1.2 kg/m.
. A typical commercial wind turbine costs approximately $2 million per MW of installed power and requires 5.76 TJ per million dollars of energy to manufacture the wind turbine. (a) Calculate the amount of energy that is consumed (i.e. energy invested) in the manufacture ofa 1.5 MW wind turbine, assuming that turbine manufacture requires 5.76 TJ per million dollars spent. (TJ Tera-joules 1012 joules) (b) If the wind turbine has blades that are 40 meters (radius) long and the average...
A wind turbine with a blade diameter of 50 m, tower height of 60 m and wind speed of 10 m/s at ground level and the air density is 1.23 kg/m3 is operating. Calculate the actual power that can be harnessed from this wind turbine.
Problem 2 A three-blade wind turbine captures 1.8 MW from wind moving horizontally with respect to the plane. If the upwind speed is 16 m/s and the coefficient of performance is 25%, compute the length of the blade. Assume the density of air is 1 kg/m3.
QUESTION 5 A wind turbine is operating in a wind of 10 m/s - that has a density of 1.2 kg/m3. The diameter of the windmill is 4 m. The constant pressure_ (atmospheric) streamline passing the turbine blade tip has a diameter of 3 m upstream of the wind turbine and 4.5 downstream. Assume that the velocity distributions are uniform and the air is incompressible. Determine the thrust due to the wind on the wind turbine. (5 marks)