1. Design a blinking LED with two speeds - slow and fast. (BASYS 3) (IN VIVADO)
Specification
To change from slow to fast press Button 1 and fast to slow press Button 2.
Reset puts the machine to slow blinking.
entity blink is port (b1, b2, ck, reset: in std_logic;
z: out std_logic);
end blink;
1. Design a blinking LED with two speeds - slow and fast. (BASYS 3) (IN VIVADO)...
A Y = A ® B 1 1 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B". Otherwise, the LED has to be OFF Hint for I/O port Definitions: Port Name Direction...
A Y = A+ B 1 1 1 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B". Otherwise, the LED has to be OFF Hint for I/O port Definitions: Port Name MSB...
A Y = A ® B 1 1 1 0 0 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B". Otherwise, the LED has to be OFF. Hint for I/O port Definitions:...
A Y = A ® B 0 1 1 1 0 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B".Otherwise, the LED has to be OFF Hint for I/O port Definitions: MSB...
I am doing an Arduino Uno project where I made a "Simon says" memory game with 3 neopixel LED strips and 3 - ultrasonics. I have them working independently but I need to combine the code so they work together. Here is what I have: Memory Game #define PLAYER_WAIT_TIME 2000 // The time allowed between button presses - 2s byte sequence[100]; // Storage for the light sequence byte curLen = 0; // Current length of the sequence byte inputCount =...
In this lab, you will design a finite state machine to control the tail lights of an unsual car. There are three lights on each side that operate in sequence to indicate thedirection of a turn. Figure ! shows the tail lights and Figure 2 shows the flashing sequence for (a) left turns and (b) right rums. ZOTTAS Figure 28:8: BCECECece BCECECECes BCECECECB BCECECBCB 8888 Figure 2 Part 1 - FSM Design Start with designing the state transition diagram for...