Cv Btu/lbm PR 400 8. Steam enters a turbine at 500 ' reversibly to 100 kPa....
Steam flows through a turbine at a rate of 19.3 kg/s. It enters the turbine at 500°C and 5 MPa and leaves at 250°C and 500 kPa If the turbine is operated adiabatically, what is the power produced by the turbine? MW It is discovered that this turbine only produces 6.581 MW of power, what is rate of energy loss due to heat transfer? kW Given the actual rate of work supplied by the turbine, what is the efficiency of...
Q2: Steam at 1200 kPa and 400°C enters a steam turbine at a flow rate of 20 kg/s. The steam leaves the turbine as a saturated vapour at 35°C. The turbine delivers 10 MW of power. Determine the heat transfer rate from this turbine.
2(a) Steam enters a turbine at 6 MPa and 500°C at a rate of 1.5 kg/s and leaves at 20 kPa. Assume the turbine is adiabatic and neglect kinetic energy changes. The power output of the turbine is 2.5 MW. What is the phase of the steam entering the turbine? appendix 1-2.pdf
Steam enters an adiabatic turbine steadily at 7 MPa, 500 °C, and 45 m/s, and leaves at 100 kPa and 75 m/s. If the power output of the turbine is 5 MW and the isentropic efficiency is 77 percent, determine: A. the mass flow rate of steam through the turbine, B. the temperature at the turbine exit, and C. the rate of entropy generation during this process.
In a reheat-cycle power plant, steam enters the high-pressure turbine at 5 MPa, 450°C, and expands to 0.5 MPa, after which it is reheated to 450°C. The steam is then expanded through the low-pressure turbine to 7.5 kPa. Liquid water (Vi 0.001 m/kg) leaves the condensor at 30°C, is pumped to 5 MPa, and returned to the steam generator. Each turbine is adiabatic, with an isentropic efficiency of 81.6 % and the pump efficiency is 848 %. If the total...
Problem 1: (10 pts) Steam enters an insulated turbine operating at steady state at a pressure of 2 MPa and a temperature of 400°C. A liquid-vapor water mixture exits the turbine with a quality of 0.9 and a pressure of 15 kPa. The power output of the turbine is 5 MW. (1) Identify the keywords and state their meaning (2 pts) (2) Determine the mass flow rate of steam required (8 pts)
Steam enters a turbine at 9 MPa and T1°C and leaves at 20 kPa with a quality equal to 0.60. Neglecting the changes in kinetic and potential energies, determine T1 if the mass flow rate through the turbine is 4 kg/s. The turbine’s power output is 7.5 MW and the heat loss from the turbine is 5 kJ/kg.
A steam turbine operates adiabatically at a power level of 3,500 kW. Steam enters the turbine at 2,400 kPa and 500 °C and exhausts from the turbine as saturated vapor at 20 kPa. What is the steam rate through the turbine and what is the turbine efficiency? 1.
Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine at 5 MPa and 500°C and is condensed in the condenser at a pressure of 50 kPa. Heat is supplied to the steam in a furnace maintained at 800 K, and waste heat is rejected to the surroundings at 300 K. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the net work output, (b) the thermal efficiency...
2. STEAM enters a reversible, adiabatic turbine at 6.0 MPa and 500 C. It leaves at 10 kPa. The mass flow rate is 40 kg/s. What is the power output of the turbine in kW? (Hints: W_dot = m_dot (h_2-h _1) and s_1=s_2). a) 1243 kW b) 2663 kW c) 33,570 kW d) 41,000 kW e) 49.725 kW