A 2.2KVA 600/120 V, transformer has the following data for its OC test and SC test:
OC Test: Voc: 120V Ioc: 0.6A Poc: 16W |
SC Test Vsc = 12V Isc = 3.67A Psc= 30W |
(a) Find the equivalent circuit referred to its HV and LV side.
(b) If it operating as a step-down transformer, and delivering its rated current at the rated voltage and 0.85 pf lagging, find what will be the input voltage.
(c) Find the Voltage regulation of this transformer.
We need at least 9 more requests to produce the answer.
1 / 10 have requested this problem solution
The more requests, the faster the answer.
A 2.2KVA 600/120 V, transformer has the following data for its OC test and SC test:...
lI. A single-phase 100 KVA, 2000/200 V transformer has the following test results Open-circuit (OC) test (LV side): 200 V, 8,0 A, 600 W Short-Circuit (SC) test (HV side): 100 V,50 A, 2000 W a. Determine the approximate equivalent circuit referred to the HV side. b. Find the voltage regulation at full-rated current delivering rated voltage and PF of 0.8 lagging. c. Calculate efficiency of transformer d. Assume that, voltage at HV side is 2000 V. Calculate the voltage at...
Electric Machinery Problem 2: [50 points] A 15-KVA, 230/2300-V transformer is considered. The following test data have been taken: | OC Test (on Primary) Voc = 230 V loc = 2.8 A Poc = 100 W SC Test (on Secondary) Vsc = 47 V Isc = 9.5 A Psc = 350 W (a) Find the equivalent circuit of this transformer referred to the high- voltage side. [10 points] (b) Find the equivalent circuit of this transformer referred to the low-...
please solve it clearly A 1000-VA, 230/115-V has the following equivalent circuit parameters Referred to high voltage side Referred to low voltage side Req=0.503 Ohm Rc=3383 Ohm Xeq=1.905 Ohm XM=1099 Ohm (Find the expected values for the open and short circuit tests and fill the following table (show all steps Short Circuit test (High voltage side) =VSC - Isc-rated current Pse Open Circuit test (Low voltage side) -Voc -Ioc Poc Then .a) Find the equivalent circuit of this transformer referred...
4. Figure shows a power source that feeds a 100 kVA 14/2.4 kV transformer through a feeder with impedance of 100/60° Ω Load 90 kw 0.85 PF lagging Feeder transmission line) Source Transformer Load The transformer has been tested to determine its equivalent circuit. The results of the tests are: Open-circuit test Voc = 14 kV oc 0.1 A Рос-800 w Short-circuit test Vsc 800 V Isc = 7A Psc 2 kW The load on the transformer is 90 kW...
Problem 1 | (30 points) followery A test 10,000 VA 115/230v transformer has the data Short-cacuit 1 Open Current test Vse av Isc=104 Pse = 40 W Voc= 1151 Ioc=0.54 Poc=10w a) Find the equivalent carunt referred to the high voltage side 6) find the equivalent circut referred to the low voltage side Assume Shag = 10KVA and Voace = 230v on high Voltage side Find the equise bhut cjuit in per-unit 1) Using per-unit circuits fröd the wolting regulation...
I have these data from Open circuit and Short circuit tests: OCT: Voc= 105.9 v Ioc= 0.08 A Poc= 2 W SCT: Vsc= 12.9 V Isc= 0.45 A Psc= 3 W pf= 0.669 How to correclty calculate the following parameters: The transformer rating is a. winding polarities b. core resistance and magnetization losses c. flux linkage losses d. winding resistances e. efficiency f. voltage regulation
For the following single phase transformer measurements calculate each of the equivalent circuit parameters: Rm, Xm, R1, Xf1, R2, Xf2 Given: No load: Voc = 120.77V Ioc = 116 mA Poc = 3.0 w Qoc = 13.7 VAr pf = .217 Full load: Vsc = 8.0V Isc = 430 mA Psc = 3.4 w Qsc = .371 VAr pf = .994 0 Rm E Es N N2 2 9 a:5
The following data was obtained when open circuit and short circuit tests were performed on a single phase, 50 KVA, 2,400:240 V, 60 Hz distribution transformer: With high voltage winding open circuited: Voc = 240 V, Ioc = 4.85 A, Poc = 173 W With low voltage winding short circuited: Vsc = 52 V, Isc = 20.8 A, Psc = 650 W a) Determine the equivalent circuit of the transformer referred to its high voltage side and to its low...
Q No.1: A 14,000/130-V, three-phase, ∆-Y transformer bank consists of three identical 100-kVA, 83l4/130-V transformers. It is supplied with power directly from a large constant voltage bus. In the short-circuit test, the recorded values on the high-voltage side for one of these transformers are Vsc = 510V, Isc = 12.6 A, Psc = 3000 W (a) If this bank delivers a rated load at 0.8 PF lagging and rated Voltage, what is the line-to-line voltage on the primary of the...
2) A 50kVA, 2400/240V single phase transformer has the test measurements: (20) Open circuit test: 240V, 5.0A, 450W (HV open) Short circuit test: 55V, 20.8A, 600W (LV short) a Caleulate the transformer equivalent circuit parameters and draw the transformer equivalent circuit. b) Find the voltage regulation and efficiency when the transformer is connected to a load that is 75% of the rated load current at 0.8 pf lagging. c) Find the voltage regulation and efficiency when the transformer is full...