The rate of heat generation is 100 kW = 100 kJ / s.
So, heat generated in 1 hr is 100 kJ / s * 3600 s = 360000000 J.
75 kmol CCl4 contains 1000 * 75 mol = 75000 mol.
Specific heat capacity of CCl4 is 131.3 J/(mol K).
So, increase in temperature is 360000000 J / [75000 mol * 131.3 J/(mol K)] = 36.55 K = 36.55 oC.
So, the output temperature is (15 + 36.55) oC= 51.55 oC.
#3 Carbon tetrachloride it be heated with an electric heater. The heater generates heat at a...
3. a) An electric water heater uses 5500 W (240 V) of electrical power. It has a capacity of 40 gallons (150 liters or 150 kg). If the initial temperature of the water in the water heater is 20° C, how long will it take to heat the water to a final temperature of 60° C at 100% efficiency? b) How long will it take to heat the water to a final temperature of 60°C at 80% efficiency? c)If electrical...
Heat transfer 1 Normal 1 No Spac.. Heading 1 Heading2 Title Subt Paragraph Styles Heat Transfer - Assignment 1 An ideal gas is heated from 50 C to 80 C, (a) at constant volume and (b) at constant pressure. For which case do you think the energy required will be greater? Why? 1. 2. Consider a house with a floor space of 200 m2 and an average height of 3 m at sea level essure is 101.3 kPa. Initially the...
Problem 3 A home in a Midwestern city is being heated with a heat pump in a winter day where the outside temperature is 5 C. Due to poor insulation, the home loses 800 KW of heat to the outside surroundings. An space heater inside the room generates 150 KW and another 120 KW of heat is generated by all the appliances and people in the room. The home is desired to be maintained at 25°C The heat pump consumes...
A 50-gallon electric water heater is used to heat tap water with an initial temperature of 15oC. The heating level is set at a maximum while several people are taking their showers. If the maximum heating level of the heater is 7.5kW of electricity and the water use rate is 3 gal/min, what is the temperature of the water exiting the heater? Assume that the system is at steady state and the heater is 100% efficient; that is it is...
- R134a in an ideal vapor compression heat pump generates 35 kW to heat a room. A mixture of 95% quality enters the compressor at 0.6 bar and saturated liquid exits the condenser at 14 bar. Determine: a) Mass flow rate (kg/hr) b) Compressor power (kJ/min) c) Heat transferred from outside (kW) d) Coefficient of performance
R134a in an ideal vapor compression heat pump generates 35 kW to heat a room. A mixture of 95% quality enters the compressor at 0.6 bar and saturated liquid exits the condenser at 14 bar. Determine: a) Mass flow rate (kg/hr) b) Compressor power (kJ/min) c) Heat transferred from outside (kW) d) Coefficient of performance We aim (haahi) Qinam = ni Chi-hu)
1. R134a in a vapor compression heat pump generates 35 kW of heat to a cold room. Saturated vapor enters the compressor at 1.6 bar and saturated liquid exits the condenser at 8 bar. Assuming 75% isentropic efficiency for the compressor, determine: a) Mass flow rate (kg/s) b) Compressor power (kW) c) Heat transfer from the outside d) Coefficient of performance
Heat Transfer A cylindrical shaped electric heater is embedded in a block of material. Determine (in degrees C) the temperature T1. givens are tabled below, where q represents the rate of the electrical heat generation, and the thermal conductivity k and temperature T2 for the block. D(mm) L(mm) q(W k(W/mK) T2 (°C) 4 915198 Electric Heater
2. A heat pump is operated to maintain a home at 25 °C when the outside temperature is only -5 °C. (a) If the house requires 50 kW heat, what is the power required for the heat pump? Assume the heat pump to be a Carnot heat pump (b) If an electric heater was used for this purpose instead, assuming an electric current of 5A, what would be the required resistance of the heater? (c) If electricity costs 10 cents...
As shown in the figure, a building with an internal volume of 400 m³ is heated by an electric heater with a power of 30 kW. The electric heater is located in an adiabatic canal and the canal is inside the building. Initially, the air inside the building is at 14 ° C and the atmospheric pressure at the location of the building is 95 kPa. There is a heat output of 450 kJ per minute from the building. In...