- R134a in an ideal vapor compression heat pump generates 35 kW to heat a room....
R134a in an ideal vapor compression heat pump generates 35 kW to heat a room. A mixture of 95% quality enters the compressor at 0.6 bar and saturated liquid exits the condenser at 14 bar. Determine: a) Mass flow rate (kg/hr) b) Compressor power (kJ/min) c) Heat transferred from outside (kW) d) Coefficient of performance We aim (haahi) Qinam = ni Chi-hu)
1. R134a in a vapor compression heat pump generates 35 kW of heat to a cold room. Saturated vapor enters the compressor at 1.6 bar and saturated liquid exits the condenser at 8 bar. Assuming 75% isentropic efficiency for the compressor, determine: a) Mass flow rate (kg/s) b) Compressor power (kW) c) Heat transfer from the outside d) Coefficient of performance
We = in (haahi) Qinani Chahu) ME 3210 Thermodynamics I Quiz 8 Summer 2020 Name: 1. R134a in an ideal vapor compression heat pump generates 35 kW to heat a room. A mixture of 95% quality enters the compressor at 0.6 bar and saturated liquid exits the condenser at 14 bar. Determine: a) Mass flow rate (kg/hr) th Compressor power (kJ/min) c) Heat transferred from outside (kW) d) Coefficient of performance
An ideal vapor-compression refrigerant cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at -10°C, and saturated liquid leaves the condenser at 28°C. The mass flow rate of refrigerant is 5 kg/min. Determine (a) The compressor power, in kW (b) The refrigerating capacity, in tons. (c) The coefficient of performance. Sketch the system on a T-s diagram with full label. A vapor-compression heat pump with a heating capacity of 500 kJ/min is...
An ideal vapor-compression heat pump cycle using R-134a is used to heat a house. The inside temperature is 22 ℃; the outside temperature is 0 ℃ Saturated vapor at 2.2 bar enters the compressor, and saturated liquid leaves the condenser at 3 ba. The mass ow rate is 0.2 kg/s. Detemine: a the power iput to the compressor (in kw) b. the coefficient of performance c. the coefficient of performance if the system were used as a refrigeration cycle d....
Problem-3 (200) In a vapor-compression refrigeration cycle, R134a exits the evaporator as saturated vapor at -32°C. The refrigerant enters the condenser at 14 bar and 170°C, and saturated liquid exits at 14 bar. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the mass flow rate is 2.987 kg/s, determine (a) Refrigeration capacity in KW (100) (b) The power input to the compressor,...
Refrigerant 134a flows through an ideal vapor compression heat pump system with a heating capacity of 60,000 Btu/hr. The condenser operates at 200 psi, and the evaporator temperature is 0°F. The refrigerant is a saturated vapor at the evaporator exit and a saturated liquid at the condenser exit. The temperature at the compressor exit is 180°F. Assuming the compressor is not 100% isentropic, determine: a) Mass flow rate (lbm/min) b) Compressor power (hp) c) Isentropic compressor efficiency d) Coefficient of...
In a vapor-compression refrigeration cycle, ammonia exits the
evaporator as saturated vapor at -22 °C. There are
irreversibilities in the compressor. The refrigerant enters the
condenser at 16 bar and 160 °C, and saturated liquid exits at 16
bar. There is no significant heat transfer between the compressor
and its surroundings, and the refrigerant passes through the
evaporator with a negligible change in pressure.
Calculate the coefficient of performance, b, and the isentropic
compressor efficiency, defined as:
2s Condenser Expansion...
An ideal vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 1.25 bar, and saturated liquid exits the condenser at 5 bar. The mass flow rate of refrigerant is 8.5 kg/min. A. Determine the magnitude of the compressor power input required, in kW (report as a positive number). B. Determine the refrigerating capacity, in tons. C. Determine the coefficient of performance. Please answer all parts of the question. Thanks!
2. (10 points) An ideal vapor-compression refrigeration cycle is modified to include a counter- flow heat exchanger, as shown below. Ammonia leaves the evaporator as saturated vapor at 1.0 bar and is heated at constant pressure to 5 "C before entering the compressor. Following isentropic compression to 18 bar, the refrigerant passes through the condenser, exiting at 40 C, 18 bar. The liquid then passes through the heat exchanger, entering the expansion valve at 18 bar. If the mass flow...