A groundwater extraction well is installed in an aquifer (hydraulic conductivity = 2,000 gpd/ft2, gradient = 0.01, and aquifer thickness = 50 ft). The design pumping rate is 60 gpm. Delineate the capture zone of this recovery well by specifying the following characteristic distances of the capture zone:
A) the side-stream distance from the well to the envelop of the capture zone at the line of the pumping well,
B) the down-stream distance from the well to stagnation point of the envelop, and
C) the side-stream distance of the envelop far upstream of the pumping well.
A groundwater extraction well is installed in an aquifer (hydraulic conductivity = 2,000 gpd/ft2, gradient =...
3. (21 points) A capture well is pumping at a rate of 37,000 ft3/day from a confined aquifer with a hydraulic conductivity of920 ft/day, an initial hydraulic gradient of 0.0027, and an initial saturated thickness of 40 ft. (A) What is the maximum width of the capture zone? (B) What is the distance from the well to the stagnation point?
(Q4). For the confined aquifer shown in the figure, find the hydraulic conductivity, K and transmissivity, Tif the pumping rate from the well (Q) is 250 gpm. The thickness of the confined aquifer is 75 ft. The draw down at a distance of 50 feet away is 8 feet and the drawdown at a distance of 200 feet away from the well is 2 ft. The original piezometric head (h.) is 100 feet from top of the shale surface as...