A tank of water of length 20 m, 10 m, and height 3.8 m is filled with water of density 1.2 g/cm3. Find the pressure (in Pa) of water on one of the walls at a point 165 cm above the bottom.
Round off the answer to 2 decimal places.
4. A rectangular tank water (width 14.0m, length 14.0m, and height 20 m) is filled with water and open to the atmosphere. The water level in the tank is 1 m below the top of the tank. This tank sits upon a platform of height h. If the water tank is plugged at the bottom so no water is flowing, what is the resultant force exerted by the water on the bottom face of the container? What is the resultant...
Imagine you have a tank filled with water. The total height of the tank is 20 m. The water in the tank has temperature of 20 °C and density of 998 kg/m3. What is the gauge pressure and absolute pressure of the water at the depth of 10m? Assume that the atmospheric pressure is 101kPa 20m 10m
A cylindrical tank is being filled with water. The tank is initially empty but then water begins to flow into it at a rate of 62.00 kg/min. There is a small hole of radius r = 0.7000 cm at the bottom of the tank where water can escape. Because the flow rate of water leaving the hole is initially at a slower rate than water entering the tank, the water level rises. The average velocity of water leaving through the...
A particle lies on the bottom ofa tank T filled with water upto a height of90 cm·The medium above the surface ofwater is ofRI, 2 above which there is mirror M. Beyond M the region contains air ( 1). The distance of the image formed by the mirror after reflection of the rays coming from Piscm w.rt.mirror) 2 610 1-2 yち μ. 1.2 2 23 A) 150 cm B) 120 cm C) 140 cmD)110
A water tank is filled to a depth of 10m, and the bottom of the tank is 20m above ground. A water-filled hose that is 2.0cm in diameter extends from the bottom of the tank to ground, but no water is flowing in this hose. The water pressure at ground level in the hose is closest to which of the following values? The density of water is 1000kg/m^3 For best answer/full points you must provide detailed, legible solution, that defines...
Need just the results. Thank you! rate. The tank has height 6 m and the diameter at the top is 4 m. If the water level is rising at a rate of 20 cm/min when find the rate at which water is being pumped into the tank. (Round your answer to the nearest integer.) 290253 cm3/min Need Help? Resd Watch iTalk to a Tutor Submit Answer Save Progress Practice Another Version o 01 points | Previous Answers SCalcET8 3 9...
Problem 4: A 4 m-wide tank with height of 1.8 m filled with water is pulled with a cable inclined at 30° to the horizontal. The constant acceleration value in the cable direction is 4 m/s. The water depth is measured as 1.5 m before the motion starts. • Determine the angle between the water surface and the horizontal. • Compute the maximum and minimum pressure values on the bottom of the tank. • How many volume of water are...
y is the original height of the cylinder 0 The water tank is shown below. It is partially filled with water ydiagram not to scae Length Height Width (d) Calculate the value of y when x 2.4m (e) State what the value of x and the value of y represent for this water (0 Find the value of x when the height of water in the tank is 0.9m. The water tank has a length of 5m. (B) When the...
(3 points) A tank of diameter D is filled with water up to a height h above the bottom of the tank (Figure 3). At the bottom of the tank is a hole of diameter d. Assume that the water flows out of the hole with a laminar flow and that the difference in atmospheric pressure between the top and the bottom of the tank is negligible. Figure 3: A tank draining (c) If you no longer assume that the...
A graduated cylinder is filled to the 20 cm mark with an emulsion of oil of density 800 kg/m3 and water. The gauge pressure at the bottom of the cylinder is 1864 Pa. The solution is left to sit, and the oil slowly separates from the water and rises to the top. (a) Calculate the height of the water, hwater, and the oil, hoil. (b) What is the gauge pressure at the bottom of the container once the solution has...