Imagine you have a tank filled with water. The total height of the tank is 20...
A water tank is filled to a depth of 10m, and the bottom of the tank is 20m above ground. A water-filled hose that is 2.0cm in diameter extends from the bottom of the tank to ground, but no water is flowing in this hose. The water pressure at ground level in the hose is closest to which of the following values? The density of water is 1000kg/m^3 For best answer/full points you must provide detailed, legible solution, that defines...
A water tank with diameter 25m and height 11m is to be filled with water to test load the foundation. [Assume stress distribution under a tank on an elastic material]. The water table in the ground is at a depth of 2.4m. The soil has a unit weight of 17kN/m3 above and19kN/m3 below the water table. Use γw = 10kN/m3. Q. At what depth below the center line of the tank (m) is the increment in principal stress equal to...
h3 h2 A "U" shaped tube (with a constant radius) is filled with water and oil as shown. The water is a height h1 0.38 m above the bottom of the tube on the left side of the tube and a height h 0.12 m above the bottom of the tube on the right side of the tube The oil is a height h3-0.32 m above the water. Around the tube the atmospheric pressure is PA 101300 Pa. Water has...
A large aquarium of height 6 m is filled with fresh water to a depth of D = 2.50 m. One wall of the aquarium consists of thick plastic with horizontal length w = 7.80 m. By how much does the total force on that wall increase if the aquarium is next filled to a depth of D = 5.00 m? (Note: use g = 9.81 m/s2 and ρ = 998 kg/m3.)
A tank of water of length 20 m, 10 m, and height 3.8 m is filled with water of density 1.2 g/cm3. Find the pressure (in Pa) of water on one of the walls at a point 165 cm above the bottom. Round off the answer to 2 decimal places.
You come across an open container that is filled with two liquids. Since the two liquids have different densities, there is a distinct separation between them. Water, which has a density of pw = 1.00 x 100 kg/m", fills the lower portion of the container to a depth of 0.218 m. The fluid that is floating on top of the water is 0.349 m deep. If the absolute pressure on the bottom of the container is 1.049 x 10 Pa,...
You come across an open container that is filled with two liquids. Since the two liquids have different densities, there is a distinct separation between them. Water, which has a density of pw 1.00 x 103 kg/m, fills the lower portion of the container to a depth of 0.206 m. The fluid that is floating on top of the water is 0.342 m deep. If the absolute pressure on the bottom of the container is 1.049 x 10 Pa, what...
The figure shows a cylindrical tank of 80 em in diameter which is fully filled with water. In order to increase the flow from the tank to the exit pipe on the left, an additional pressure is applied to the water surface by an air compressor to supply air to the upper air chamber of the tank. The external walls of the tank are exposed to the atmospheric conditions of the area. You are required to determine the hydrostatic conditions...
You come across an open container that is filled with two liquids. Since the two liquids have different densities, there is a distinct separation between them. Water, which has a density of ρw=1.00×103 kg/m3, fills the lower portion of the container to a depth of 0.215 m. The fluid that is floating on top of the water is 0.342 m deep. If the absolute pressure on the bottom of the container is 1.049×105 Pa, what is the density, ρl, of...
You come across an open container that is filled with two liquids. Since the two liquids have different densities, there is a distinct separation between them. Water, which has a density of ρw=1.00×103 kg/m3, fills the lower portion of the container to a depth of 0.209 m. The fluid that is floating on top of the water is 0.314 m deep. If the absolute pressure on the bottom of the container is 1.049×105 Pa, what is the density, ?l, of...