The pressure of water flowing through a 6.1×10−2 −m -radius pipe at a speed of 2.0 m/sm/s is 2.22. ×× 10^5 N/m2N/m2.
What is the pressure in the water after it goes up a 6.0 −m -high hill and flows in a 4.9×10−2 −m -radius pipe?
Hope this helps...
The pressure of water flowing through a 6.1×10−2 −m -radius pipe at a speed of 2.0...
The pressure of water flowing through a 6.1×10−2 −m -radius pipe at a speed of 1.1 m/s is 2.2 × 105 N/m2. 1)What is the pressure in the water after it goes up a 4.8 −m -high hill and flows in a 4.4×10−2 −m -radius pipe?
Review A water filled pipe has water flowing at v1= 6.20 m/s in a section of pipe where the diameter is d1= 19.2 cm and the pressure is known to be P1= 7.00×104 N/m2 above atmospheric pressure. 1- If the pipe carries the water 3.5 meters up hill without any change in diameter, what is the new absolute pressure within the pipe? 2- After flowing up the hill described above, the pipe narrows to 80% of its original radius, what...
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 2.0 cm, and the radius of the nozzle is 0.59 cm. The speed of the water in the pipe is 0.73 m/s. Treat the water as an ideal fluid, and determine the absolute pressure of the water in the pipe. P1 =
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 1.7 cm, and the radius of the nozzle is 0.49 cm. The speed of the water in the pipe is 0.78 m/s. Treat the water as an ideal fluid, and determine the absolute pressure of the water in the pipe. Pa
water is flowing through a circular pipe with a radius of .3 m at 3.4 m/s. if the pupes radius tapers down to 2m, what is tge speed if water through the narrower end? m/s
Water flows through a pipe of diameter 2.0 cm with a speed of 4.00m/s and pressure 2.00x104Pa. What will be its speed and pressure if the pipe diameter changes to 6.00cm
Water is flowing through a circular pipe with a radius of 0.40 mat 4.50 m/s. If the pipe's radius tapers down to 0.30 m, what is the speed of water through the narrower end? Answer in m/s.
Water (density = 1.00 ? 10 3 kg/m 3 ) flows at 10.0 m/s through a pipe with radius 0.030 m. The pipe goes up to the second floor of the building, 2.0 m higher, and thepressure remains unchanged. What is the radius of the pipe on the second floor?
A horizontal pipe contains water at a pressure of 110 kPa flowing with a speed of 2.0 m/s The pipe narrows to one-hall its original diameter. What is the speed of the water? Express your answer using two significant figures. upsilon = 8 0 m/s What is the pressure of the water? Express your answer using two significant figures.
Water in a large pipe, area A1 is flowing at a speed of 10 m/s. It flows into a different part of the same pipe, area A2 = 4m^2, at speed 15 m/s, What is A1 in m^2?