The pressure of water flowing through a 6.1×10−2 −m -radius pipe at a speed of 1.1 m/s is 2.2 × 105 N/m2.
1)What is the pressure in the water after it goes up a 4.8 −m -high hill and flows in a 4.4×10−2 −m -radius pipe?
The pressure of water flowing through a 6.1×10−2 −m -radius pipe at a speed of 1.1...
The pressure of water flowing through a 6.1×10−2 −m -radius pipe at a speed of 2.0 m/sm/s is 2.22. ×× 10^5 N/m2N/m2. What is the pressure in the water after it goes up a 6.0 −m -high hill and flows in a 4.9×10−2 −m -radius pipe?
Review A water filled pipe has water flowing at v1= 6.20 m/s in a section of pipe where the diameter is d1= 19.2 cm and the pressure is known to be P1= 7.00×104 N/m2 above atmospheric pressure. 1- If the pipe carries the water 3.5 meters up hill without any change in diameter, what is the new absolute pressure within the pipe? 2- After flowing up the hill described above, the pipe narrows to 80% of its original radius, what...
Water entering a house flows with a speed of 0.25 m/s through a pipe of 1.1 cm inside radius. What is the speed of the water at a point where the pipe tapers to a radius of 2.3 mm? __________m/s
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 1.7 cm, and the radius of the nozzle is 0.49 cm. The speed of the water in the pipe is 0.78 m/s. Treat the water as an ideal fluid, and determine the absolute pressure of the water in the pipe. Pa
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 2.0 cm, and the radius of the nozzle is 0.59 cm. The speed of the water in the pipe is 0.73 m/s. Treat the water as an ideal fluid, and determine the absolute pressure of the water in the pipe. P1 =
A large city waterline pipe has radius 6.2×10−2 mand feeds ten smaller pipes, each of radius 2.2×10−2 m , that carry water to homes. The flow rate of water in each of the smaller pipes is to be 6.0 × 10−3 m3/s, and the pressure is 4.00 ×105 N/m2. The homes are 11.0 m above the main pipe. What is the average speed of the eater in the main pipe? (Not 0.496 m/s) What is the pressure of the main...
water is flowing through a circular pipe with a radius of .3 m at 3.4 m/s. if the pupes radius tapers down to 2m, what is tge speed if water through the narrower end? m/s
Water is flowing through a circular pipe with a radius of 0.40 mat 4.50 m/s. If the pipe's radius tapers down to 0.30 m, what is the speed of water through the narrower end? Answer in m/s.
Water in a large pipe, area A1 is flowing at a speed of 10 m/s. It flows into a different part of the same pipe, area A2 = 4m^2, at speed 15 m/s, What is A1 in m^2?
Water flows through a pipe as shown in the figure. The pressure at points 1 and 2 respectively is 1.80 x 105 Pa and 1.20 x 105 Pa. The radius of the pipe at points 1 and 2 respectively is 3.50 cm and 1.20 cm. If the vertical distance between points 1 and 2 is 2.75 m, determine the following. (a) speed of flow at point 1 m/s (b) speed of flow at point 2 cm/s (c) volume flow rate...